{"title":"Water Pumps for Facilities \u0026 Property Management","description":"\u003cp\u003e\u003cspan\u003eWater pumps and pump kits for facilities and property management: car park and lift-pit sumps, basement and plant room, automatic pump stations and emergency flood response.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"stream-spk530-puddle-sucker","title":"Stream SPK530 Heavy Duty Puddle Sucker Pump | Flood Pump to 1mm","description":"\u003ch2\u003eStream SPK530 Heavy-Duty Puddle Sucker Pump – Removes Water Down to 1mm\u003c\/h2\u003e\n\u003cp\u003eThe Stream SPK530 is a heavy-duty puddle sucker pump designed for removing floodwater and low-level standing water from floors, roofs, basements, garages and construction sites.\u003c\/p\u003e\n\u003cp\u003eUnlike a conventional submersible pump, which normally leaves several centimetres of water behind, the SPK530 can pump water down to approximately 1mm under suitable conditions. It delivers a maximum flow rate of up to 170 litres per minute and is available in either 110V or 230V.\u003c\/p\u003e\n\u003cp\u003eManufactured by \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/stream-pumps\"\u003eStream Pumps\u003c\/a\u003e, the SPK530 is supplied with a \u003cstrong\u003e3-year manufacturer’s warranty\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAs seen on the \u003ca href=\"https:\/\/www.gov.uk\/government\/organisations\/environment-agency\"\u003eEnvironment Agency\u003c\/a\u003e FloodMobile.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat is the Stream SPK530 used for?\u003c\/h3\u003e\n\u003cp\u003eThe SPK530 is suitable for residential, commercial, industrial and hire-fleet applications, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving water from flooded buildings\u003c\/li\u003e\n\u003cli\u003ePumping water from garages and commercial units\u003c\/li\u003e\n\u003cli\u003eEmptying basements and cellars\u003c\/li\u003e\n\u003cli\u003eDraining flat roofs\u003c\/li\u003e\n\u003cli\u003eRemoving water from construction sites\u003c\/li\u003e\n\u003cli\u003eClearing water from storage areas\u003c\/li\u003e\n\u003cli\u003eResponding to leaks and emergency water ingress\u003c\/li\u003e\n\u003cli\u003eEmptying unoccupied hot tubs*\u003c\/li\u003e\n\u003cli\u003eIndoor and outdoor drainage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe pump is suitable for clean and slightly dirty water, including typical floodwater. It is not suitable for raw sewage or water containing large solids.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e*Only use the pump to empty an unoccupied hot tub. Allow the water to cool before pumping and flush the pump thoroughly with clean water afterwards.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eNeed automatic operation?\u003c\/h3\u003e\n\u003cdiv style=\"margin: 28px 0; padding: 20px 24px; background: #F0EDE5; border-left: 4px solid #283583; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong\u003eThe SPK530 is a manual heavy-duty puddle pump, so it needs to be switched on and off as required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003eIf you need the pump to respond to rising water automatically, choose the \u003cstrong\u003eStream SPK530A\u003c\/strong\u003e. It combines the same high-flow puddle pumping performance with automatic low-level control, making it better suited to unattended, commercial and heavier-duty applications.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003e\u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/stream-spk530a-automatic-puddle-pump\"\u003e\u003cstrong\u003eView the Stream SPK530A Automatic Heavy Duty Puddle Sucker Pump ›\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eBuy it as a kit\u003c\/h3\u003e\n\u003cdiv style=\"margin: 28px 0; padding: 20px 24px; background: #F0EDE5; border-left: 4px solid #283583; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong\u003eThe SPK530 is also sold as an FPS Engineered™ kit, made up for hire fleets and flood response.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003eA pump on its own does nothing until you have something to run the discharge through. The \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/trade-hire-flood-pump-kit-stream-spk530\"\u003eTrade \u0026amp; Hire Flood Pump Kit\u003c\/a\u003e adds:\u003c\/p\u003e\n\u003cul style=\"margin: 0 0 12px 22px; padding: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e6m of 25mm reinforced hose\u003c\/strong\u003e, for the first run out of the water\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10m of 25mm layflat\u003c\/strong\u003e, which rolls flat for the van and holds the flow better than adding more narrow-bore\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25mm cam couplings\u003c\/strong\u003e, parts C and E, so the two hoses join and part in seconds without tools\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 × stainless steel hose clips\u003c\/strong\u003e, 20 to 32 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin: 0;\"\u003eAvailable in \u003cstrong\u003e110V and 230V\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhat is the best pump for removing shallow floodwater?\u003c\/h3\u003e\n\u003cp\u003eThe Stream SPK530 is one of the strongest options for removing shallow floodwater because it combines a high maximum flow rate with the ability to pump down to approximately 1mm.\u003c\/p\u003e\n\u003cp\u003eThis makes it particularly useful where a conventional submersible pump would stop working while a significant layer of water remained. Typical applications include garages, basements, commercial floors, flat roofs and other level surfaces.\u003c\/p\u003e\n\u003cp\u003eActual residual water depth will depend on the flatness and condition of the surface, the presence of debris and how evenly water can reach the pump inlet.\u003c\/p\u003e\n\u003ch3\u003eHow low can the Stream SPK530 pump water?\u003c\/h3\u003e\n\u003cp\u003eThe SPK530 can reduce standing water to approximately 1mm under suitable operating conditions. Its specially designed bottom plate allows it to continue drawing water at a much lower level than a conventional drainage pump.\u003c\/p\u003e\n\u003cp\u003eFor the best results, position the pump on a reasonably flat surface and remove any debris that could obstruct the inlet or prevent water from flowing towards the pump.\u003c\/p\u003e\n\u003ch3\u003eIs the Stream SPK530 an automatic pump?\u003c\/h3\u003e\n\u003cp\u003eNo. The SPK530 is a manual electric pump. This means it starts when the electrical power is switched on and stops when the power is switched off.\u003c\/p\u003e\n\u003cp\u003eIt does not rely on a conventional external float switch, which allows it to operate in much shallower water. The pump should therefore be monitored and switched off when pumping is complete.\u003c\/p\u003e\n\u003ch3\u003eCan the Stream SPK530 be fully submerged?\u003c\/h3\u003e\n\u003cp\u003eYes. Although the SPK530 is designed to remove very shallow water, it can also be fully submerged to a maximum depth of 5 metres.\u003c\/p\u003e\n\u003cp\u003eThis allows the same pump to be used for both deeper floodwater and the final removal of low-level residual water.\u003c\/p\u003e\n\u003ch3\u003eHow much water can the SPK530 pump?\u003c\/h3\u003e\n\u003cp\u003eThe Stream SPK530 delivers a maximum flow rate of up to \u003cstrong\u003e170 litres per minute\u003c\/strong\u003e and has a maximum head of \u003cstrong\u003e11 metres\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eMaximum flow and maximum head occur at different points on the pump curve. The actual flow achieved will depend on the vertical pumping height, hose length, hose diameter, bends, fittings and other resistance within the discharge arrangement.\u003c\/p\u003e\n\u003cp\u003eFor a more accurate estimate, refer to the pump performance graph and select the expected flow at the required operating head.\u003c\/p\u003e\n\u003ch3\u003eCan the SPK530 pump water upstairs or over a wall?\u003c\/h3\u003e\n\u003cp\u003eThe SPK530 has a maximum head of 11 metres, so it can pump water vertically or route it over walls, steps and other obstacles, provided the total resistance remains within the pump’s operating capability.\u003c\/p\u003e\n\u003cp\u003eLong hoses, narrow outlets, bends and vertical lift will reduce the flow rate. A kink-resistant hose is therefore recommended where the discharge route is long or uneven.\u003c\/p\u003e\n\u003ch3\u003eWhich hose should I use with the Stream SPK530?\u003c\/h3\u003e\n\u003cp\u003eThe most popular hose used with the SPK530 is the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/hoses-fittings\/products\/suction-delivery-hose-25mm\"\u003e25mm suction and delivery hose\u003c\/a\u003e. Its reinforced construction helps it resist kinking when routed over walls, around corners or up steps.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/hoses-fittings\/products\/layflat-hose-25m-outlet\"\u003e25mm layflat hose\u003c\/a\u003e is another option. It is lightweight, economical and easy to store, although it is more likely to kink or flatten where the route changes direction.\u003c\/p\u003e\n\u003cp\u003eThe pump is supplied with a 25mm hose tail. A suitable hose clip, commonly known as a Jubilee clip, is normally all that is required to secure the hose.\u003c\/p\u003e\n\u003ch3\u003eCan the outlet point horizontally or vertically?\u003c\/h3\u003e\n\u003cp\u003eYes. The SPK530 has an adjustable discharge connector that can be positioned horizontally or vertically.\u003c\/p\u003e\n\u003cp\u003eTo adjust the outlet, remove the two silver bolts, rotate the discharge plate to the required position and refit the bolts. Selecting the most suitable outlet direction can reduce hose kinking and improve the achievable flow rate.\u003c\/p\u003e\n\u003ch3\u003eShould I choose the 110V or 230V SPK530?\u003c\/h3\u003e\n\u003cp\u003eChoose the \u003cstrong\u003e230V model\u003c\/strong\u003e for use with a standard domestic or commercial electrical supply.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e110V model\u003c\/strong\u003e is generally selected for construction sites and other professional environments where a 110V centre-tapped transformer supply is required for site safety.\u003c\/p\u003e\n\u003cp\u003eAlways confirm that the available electrical supply is compatible with the selected pump before use.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePumps standing water down to approximately 1mm\u003c\/li\u003e\n\u003cli\u003eMaximum flow rate of up to \u003cstrong\u003e170 litres per minute\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum head of \u003cstrong\u003e11 metres\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower -\u003cstrong\u003e 480W \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles particle size of up to 5mm\u003c\/strong\u003e (Free Passage)\u003c\/li\u003e\n\u003cli\u003eFully submersible to a maximum depth of 5 metres\u003c\/li\u003e\n\u003cli\u003eAvailable in 110V and 230V\u003c\/li\u003e\n\u003cli\u003eIntegral swing check valve helps prevent water returning through the discharge hose\u003c\/li\u003e\n\u003cli\u003eAdjustable horizontal or vertical discharge outlet\u003c\/li\u003e\n\u003cli\u003eWater-cooled motor suitable for prolonged operation\u003c\/li\u003e\n\u003cli\u003eBuilt-in motor protection against overheating\u003c\/li\u003e\n\u003cli\u003eWear-resistant components for demanding use\u003c\/li\u003e\n\u003cli\u003eManual operation allows pumping at very low water levels\u003c\/li\u003e\n\u003cli\u003e3-year manufacturer’s warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Stream SPK530 puddle sucker pump\u003c\/li\u003e\n\u003cli\u003e1 × 10 metre heavy-duty rubber power cable\u003c\/li\u003e\n\u003cli\u003e1 × 25mm hose tail\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stream Pumps","offers":[{"title":"230V (3 Pin Domestic Plug)","offer_id":47423035474239,"sku":"STR-SPK530-230-M","price":295.0,"currency_code":"GBP","in_stock":true},{"title":"110V (Industrial)","offer_id":47423035507007,"sku":"STR-SPK530-110-M","price":295.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/SPK530_Puddle_Pump_806af722-0611-4b4e-ad15-2bfdbaeb0be8-818609.png?v=1725879949"},{"product_id":"tsurumi-304-stainless-steel-sq2-2-pump","title":"Tsurumi SQ2-2 Stainless Steel Drainage Water Pump","description":"\u003ch2\u003eTsurumi SQ2-2 Stainless Steel Submersible Drainage Pump | Corrosion-Resistant Pump for Food, Aquaculture and Industrial Use\u003c\/h2\u003e\n\u003cp\u003eThe Tsurumi SQ2-2 is a 304 and 316 stainless steel submersible drainage pump designed for applications where corrosion resistance, space efficiency, and hygienic operation are essential. With a top discharge, flow-through design that keeps the motor cool even in low water levels, and paraffin oil lubrication approved for food contact environments, it handles screened wastewater and clean water across domestic, trade, and industrial settings. Available in single-phase 230V and three-phase 400V models, with motor outputs from 0.40kW to 0.75kW and flows up to 300 litres per minute.\u003c\/p\u003e\n\u003ch3\u003eWhat is the Tsurumi SQ2-2 used for?\u003c\/h3\u003e\n\u003cp\u003e•    Drainage of screened wastewater and clean water in domestic, trade, and industrial settings\u003cbr\u003e•    Food processing facilities where hygienic, food-safe lubrication is required\u003cbr\u003e•    Aquaculture and fish farming operations requiring corrosion-resistant pumping\u003cbr\u003e•    Chemical and process industry applications requiring higher corrosion resistance than standard cast iron pumps\u003cbr\u003e•    Drainage in confined or space-limited installations where a compact, top-discharge pump is needed\u003cbr\u003e•    Pumping in environments where the pump may operate at very low water levels or partially submerged\u003cbr\u003e•    Light industrial drainage including pharmaceutical, beverage, and food production environments\u003c\/p\u003e\n\u003ch3\u003eConstruction and Durability\u003c\/h3\u003e\n\u003cp\u003eThe SQ2-2 is built with a combination of 304 and 316 stainless steel and engineering resin throughout the wetted components. The outer cover is 316 stainless steel, offering greater corrosion resistance than standard 304, while the lower pump casing and shaft are 304 stainless steel and the strainer is 304 stainless steel. The impeller and oil casing are polyphenylene, a high-performance engineering polymer with excellent chemical and thermal resistance. The shaft seal is silicon carbide, one of the hardest sealing materials available and highly resistant to abrasion and chemical attack. Critically, the lubrication oil is liquid paraffin, a food-safe mineral oil that makes the SQ2-2 suitable for food processing and aquaculture environments where standard petroleum-based oils would be unacceptable. The top discharge, flow-through design ensures the pumped water continuously cools the motor during operation, allowing the pump to run reliably at low water levels and for short periods in dry conditions without motor damage.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the Tsurumi SQ2-2?\u003c\/h3\u003e\n\u003cp\u003eThe SQ2-2 occupies a specific and important niche: a submersible stainless steel pump that genuinely meets the demands of food, aquaculture, and chemically aggressive environments without over-engineering the solution. The paraffin oil lubrication is a key differentiator, enabling its use in food and aquaculture settings where most pumps cannot be safely deployed. The 316 stainless steel outer cover and 304 stainless steel internals provide corrosion resistance well beyond what a standard cast iron or brass pump offers. Tsurumi's top discharge, flow-through motor cooling design is a proven engineering approach that extends motor life by ensuring reliable cooling even when the pump is barely submerged. For applications that require a compact, corrosion-resistant submersible pump with food-safe credentials and genuine Tsurumi build quality, the SQ2-2 is difficult to match. \u003c\/p\u003e\n\u003ch3\u003eOperational Details\u003c\/h3\u003e\n\u003cp\u003e•    Models: 50SQ2-2.4S (230V single-phase) \/ 50SQ2-2.4 (400V three-phase) \/ 50SQ2-2.75 (400V three-phase)\u003cbr\u003e•    Motor output: 0.40kW (2.4 models) \/ 0.75kW (2.75 model)\u003cbr\u003e•    Max flow rate: 240 l\/min (0.40kW models) \/ 300 l\/min (0.75kW model)\u003cbr\u003e•    Max head: 10.5 metres (0.40kW models) \/ 14.5 metres (0.75kW model)\u003cbr\u003e•    Outlet size: 50mm (2 inch)\u003cbr\u003e•    Free passage: 6mm\u003cbr\u003e•    Voltage: 230V single-phase (50SQ2-2.4S) \/ 400V three-phase (50SQ2-2.4 and 50SQ2-2.75)\u003cbr\u003e•    Operation: Manual (no float switch)\u003cbr\u003e•    Dimensions: Diameter 180mm x Height 366mm (2.4 models) \/ 388mm (2.75 model)\u003cbr\u003e•    Dry weight: 10.5kg (2.4 models) \/ 12.0kg (2.75 model)\u003cbr\u003e•    Lubrication: Paraffin oil (food-safe)\u003cbr\u003e•    Not recommended for ponds or water features\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box?\u003c\/h3\u003e\n\u003cp\u003e•    Tsurumi SQ2-2 stainless steel submersible pump unit\u003cbr\u003e•    Stainless steel strainer pre-fitted\u003cbr\u003e•    Power cable (length dependent on model)\u003cbr\u003e\u003c\/p\u003e","brand":"Tsurumi Pumps","offers":[{"title":"50SQ2-2.4","offer_id":47487953305919,"sku":"10-10-1278","price":1865.83,"currency_code":"GBP","in_stock":true},{"title":"50SQ2-2.4S","offer_id":47487953338687,"sku":"10-10-1263","price":1732.5,"currency_code":"GBP","in_stock":true},{"title":"50SQ2-2.75","offer_id":47487953371455,"sku":"10-10-1291","price":2174.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/tsurumi-304-stainless-steel-sq2-2-pump-choose-model-50sq2-2.75-7943-p.jpg?v=1704195749"},{"product_id":"speroni-304-stainless-steel-sxs","title":"Speroni 304 Stainless Steel SXS Sewage Pump","description":"\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eSubmersible stainless steel drainage pump for sewage and septic tank work with fibrous waste.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe SXS is a submersible \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/solids-sewage-pumps\" target=\"_blank\" rel=\"noopener\"\u003eSewage Pump\u003c\/a\u003e built entirely in 304 stainless steel by \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/speroni-pumps\" target=\"_blank\" rel=\"noopener\"\u003eSperoni Pumps\u003c\/a\u003e, designed for pumping waste that contains fibrous material and suspended soft solids. The combination of a wide pump casing, a vortex impeller, and a 50mm free passage means the pump can handle sewage and waste that would clog a standard drainage pump.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eStainless steel construction matters in this application because sewage is mildly corrosive. Cast iron drainage pumps do the same physical job but corrode over time in sewage service. A 304 stainless body holds up for longer in the same conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch2 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eSperoni SXS: Built for Aggressive Waste\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe SXS uses 304 stainless steel throughout the wetted components, combined with NBR (nitrile butadiene rubber) seals.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eNBR is a synthetic rubber chosen specifically for its resistance to oils, fuels, and chemicals. In sewage and industrial waste, this matters because the water often carries traces of detergents, oils, and aggressive organic matter that would break down standard rubber seals within months.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eWhere the Speroni SXS is Used\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cul\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eSeptic tank emptying and transfer.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eSewage pumping from domestic and commercial installations.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eConstruction site drainage where the water carries debris and fine solids.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eIndustrial and processing drainage where the waste stream contains fibrous or soft solid material.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eLight commercial sewage pumping where grinder cutters are not needed.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eAny drainage application where the water has suspended organic or fibrous content.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch4 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eInstallation-Friendly Design\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cul\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eHorizontal outlet for clean pipe runs.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eFemale BSP threaded outlet for standard plumbing fittings.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eRemovable stand so the pump can sit stable in a chamber or be repositioned.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eLarge free passage (50mm) to pass most soft solids without jamming.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch4 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eChoosing Between the Two Sizes\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe SXS1000-VA is the 0.75kW version on 230V single-phase, with 350 l\/min flow at 9m head. It is the usual specification for individual domestic septic tank work and light sewage pumping. This version is \u003cstrong\u003eautomatic \u003c\/strong\u003ewith a pendant float switch. The pump switches on automatically when the water level rises and off when it drops, which is essential for any unattended installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe SXS 2000-T-V steps up to 1.5kW on 400V three-phase, with 550 l\/min flow at 12.5m head, for larger installations and commercial drainage. The SXS 2000 does not have an integrated float switch, so automatic operation requires an external float switch or level controller wired into the supply.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch4 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eFree Passage: What That Means\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eFree passage is the largest solid particle the pump can handle without jamming. With a free passage of 50mm, the SXS can pass through material up to about 2 inches in diameter. That is enough for most sewage and soft-solid waste. Where the waste stream includes larger solids or shreddable fibres, a grinder pump like the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/solids-sewage-pumps\/products\/speroni-cutty-industrial-sewage-pump\" target=\"_blank\" rel=\"noopener\"\u003eSperoni Cutty\u003c\/a\u003e is the better answer.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch4 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eNot for Ponds or Water Features\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe SXS is a specialist sewage and drainage pump. It is not suitable for ponds, water features, or clean water circulation.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe vortex impeller and 50mm free passage are optimised for waste, not for clean water delivery, so using the SXS on a clean water application is inefficient and noisy compared to a purpose-built pond pump.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Speroni","offers":[{"title":"SXS1000-VA","offer_id":47488165151039,"sku":"19-10-1003","price":490.83,"currency_code":"GBP","in_stock":true},{"title":"SXS2000-T-V","offer_id":47488165183807,"sku":"19-10-1001","price":562.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Speroni_304_Automatic_Stainless_Steel_SXS_Sewage_Pump.jpg?v=1782213837"},{"product_id":"tsurumi-om4-submersible-sump-pump","title":"Tsurumi OM5 Submersible Sump Pump","description":"\u003ch2 class=\"MsoNormal\"\u003eTsurumi OM5 \u0026amp; OMA5 Submersible Pumps – Compact, Reliable Drainage for Sumps \u0026amp; Basements\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Tsurumi OM5 submersible pump range is a proven and \u003cstrong\u003edependable solution\u003c\/strong\u003e for drainage in basements, sumps, chambers, and catchment pits, suitable for both domestic and industrial applications. Superseding the popular OM4 model, the OM5 builds on its predecessor’s reputation with improved efficiency, reliability, and compact design.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eFully submersible and easy to install, the OM5 is a long-standing favourite with water companies and utilities, valued for its performance and durability.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eManual \u0026amp; Automatic Models\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe OM5 range is available in manual and automatic versions, allowing you to choose the level of control that best suits your application.\u003c\/p\u003e\n\u003ch4 class=\"MsoNormal\"\u003eManual Models\u003c\/h4\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"margin-bottom: 0cm; font-weight: bold;\" class=\"MsoNormal\"\u003e\u003cstrong\u003eOM5 Industrial 110V\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; font-weight: bold;\" class=\"MsoNormal\"\u003e\u003cstrong\u003eOM5 Industrial 230V\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; font-weight: bold;\" class=\"MsoNormal\"\u003e\u003cstrong\u003eOM5 Domestic 230V\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eManual pumps require switching on and off at the mains and are best suited to monitored or controlled installations, or when connected to other float switches in a monitored system.\u003c\/p\u003e\n\u003ch4 class=\"MsoNormal\"\u003eAutomatic Models\u003c\/h4\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; font-weight: bold;\"\u003e\u003cstrong\u003eOMA5 Industrial 110V Auto\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; font-weight: bold;\"\u003e\u003cstrong\u003eOMA5 Industrial 230V Auto\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; font-weight: bold;\"\u003e\u003cstrong\u003eOMA5 Domestic 230V Auto\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eAutomatic models turn themselves on and off as water levels rise and fall, providing passive operation in unattended sumps and basements.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhy the Tube Float Switch Makes the OMA5 Stand Out\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eFor automatic operation in tight or narrow sumps, the OMA5 uses a vertical tube float switch instead of a traditional pendant float. This design offers major practical advantages:\u003c\/p\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo4; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eReliable operation in confined spaces\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo4; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eAccurate and consistent defined on\/off levels\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo4; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eNo snagging on chamber walls or pipework\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"MsoNormal\"\u003eOff and On levels:\u003c\/h4\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"mso-list: l2 level1 lfo5; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cstrong\u003eON:\u003c\/strong\u003e 222mm\u003c\/li\u003e\n\u003cli style=\"mso-list: l2 level1 lfo5; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cstrong\u003eOFF: \u003c\/strong\u003e61mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eThis makes the OMA5 a go-to choice where pendant floats would be unreliable or impractical.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ci\u003eThe diagram below illustrates the advantages of the tube float design and why it performs so well in confined spaces compared with standard pendant floats.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"water pump float switch diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Water_Pump_Float_Diagram.png?v=1764710528\"\u003e\u003c\/div\u003e\n\u003ch3 class=\"MsoNormal\"\u003eIndustrial vs Domestic Versions – What’s the Difference?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eIndustrial models are designed for permanent or semi-permanent installations in sumps, chambers, and basements. As such, they are supplied without a plug or hosetail and are intended to be hard-wired.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eDomestic models (230V only) are supplied ready to use and include:\u003c\/p\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l0 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e3-pin plug\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l0 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eHosetail\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l0 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eHose clip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eThis makes the domestic OM5 ideal for straightforward residential installations.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll models are supplied with a 10-metre heavy-duty power cable.\u003cbr\u003e\u003cem\u003ePlease note:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"margin-bottom: 0cm; font-style: italic;\" class=\"MsoNormal\"\u003e\u003cem\u003eIndustrial versions do not include a plug, hosetail, or hose clip\u003c\/em\u003e\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; font-style: italic;\" class=\"MsoNormal\"\u003e\u003cem\u003eDomestic versions include all three as standard\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"MsoNormal\"\u003eEfficient Performance from a Compact Sump Pump\u003c\/h4\u003e\n\u003cp class=\"MsoNormal\"\u003eThe OM5 range uses an energy-efficient \u003cstrong\u003e150-watt motor\u003c\/strong\u003e, delivering good flow and head for its size while keeping running costs low. Its compact size allows it to fit neatly into small sumps and chambers.\u003c\/p\u003e\n\u003ch4 class=\"MsoNormal\"\u003eDesigned to Reduce Air Locks\u003c\/h4\u003e\n\u003cp class=\"MsoNormal\"\u003eThe OM5 range includes an \u003cstrong\u003eintegral vent valve\u003c\/strong\u003e, helping to prevent air locks during operation. \u003cstrong\u003eThis improves reliability\u003c\/strong\u003e, particularly in sump applications where air entrapment can otherwise interrupt pumping.\u003c\/p\u003e\n\u003ch4 class=\"MsoNormal\"\u003eDurable Construction for Drainage Duties\u003c\/h4\u003e\n\u003cp class=\"MsoNormal\"\u003eThe pump is fitted with:\u003c\/p\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo6; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eDouble mechanical silicon carbide shaft seal for long service life\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo6; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eVortex impeller for light solids handling\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo6; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eGlass Fibre Reinforced Plastic (GFRP) impeller, offering corrosion resistance, low weight, and efficient hydraulics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eGFRP impellers reduce load on the motor and bearings, improving start-up performance and long-term reliability. The OM5 is suitable for clean and lightly contaminated water, but is not intended for ponds or water features.\u003c\/p\u003e\n\u003ch4 class=\"MsoNormal\"\u003eSuitable Applications \u0026amp; Operating Conditions\u003c\/h4\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eFluids: \u003c\/strong\u003eClean water | Dirty water\u003cbr\u003e\u003cstrong\u003eTemperature range:\u003c\/strong\u003e 0–40°C\u003cbr\u003e\u003cstrong\u003eApplications: \u003c\/strong\u003eDomestic | Industrial | Utilities | Basements | Processing | Sumps\u003c\/p\u003e\n\u003ch4\u003eWhat's in the box:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e✅\u003c\/span\u003e\u003c\/strong\u003e1x OM5 Pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e✅\u003c\/span\u003e\u003c\/strong\u003e1x 10m Heavy duty rubber power cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e✅\u003c\/span\u003e\u003c\/strong\u003e1x Hose tail with domestic model only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tsurumi Pumps","offers":[{"title":"OM5 industrial - 110V","offer_id":47488547619135,"sku":"10-10-1201","price":357.5,"currency_code":"GBP","in_stock":true},{"title":"OM5 industrial - 230V","offer_id":47488547651903,"sku":"10-10-1051","price":357.5,"currency_code":"GBP","in_stock":true},{"title":"OMA5 industrial - 110V - Auto","offer_id":47488547684671,"sku":"10-10-1173","price":412.5,"currency_code":"GBP","in_stock":true},{"title":"OMA5 industrial - 230V - Auto","offer_id":47488547717439,"sku":"10-10-1202","price":412.5,"currency_code":"GBP","in_stock":true},{"title":"OM5 domestic - 230V","offer_id":47488547750207,"sku":"10-10-1183","price":365.83,"currency_code":"GBP","in_stock":true},{"title":"OMA5 domestic - 230V - Auto","offer_id":47488547782975,"sku":"10-10-1241","price":420.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/OMA-5.jpg?v=1759227919"},{"product_id":"tsurumi-poma-submersible-automatic-sump-pump","title":"Tsurumi POMA Submersible Automatic Sump Pump - Tube Float Switch, Ideal for Narrow Chambers","description":"\u003ch2 class=\"MsoNormal\"\u003eTsurumi POMA5 Automatic Submersible Pump\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003ci\u003e(Supersedes the POMA4)\u003c\/i\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eCompact, Reliable \u0026amp; Designed for Narrow Chambers and Sumps\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Tsurumi POMA5 is a dependable automatic submersible pump ideal for domestic, industrial, and utility applications. Replacing the earlier POMA4, this latest model retains the same performance while offering long-term reliability, solids handling capability, and precise level control.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"mso-spacerun: yes;\"\u003e \u003c\/span\u003eIts compact size and tube float switch make it the perfect choice for \u003cb\u003enarrow chambers, confined sumps, basements, cellars, and processing environments\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eEnergy-Efficient Performance with Exceptional Reliability\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003ePowered by an energy-efficient 150W motor, the POMA5 delivers an impressive flow rate for its size while keeping running costs low. This pump is widely used by water utilities thanks to its ability to handle soft suspended solids, its robust level control system, and its long service life in demanding environments.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe  Glass Fibre Reinforced Polymer impeller is engineered for generous soft solids handling, while the stainless-steel shaft and silicon carbide mechanical seal help ensure years of trouble-free operation.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhy the Tube Float Switch Makes the Tsurumi POMA Popular\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eTraditional pendant floats often fail or snag in tight spaces. The POMA5 avoids this entirely with its vertical tube float switch, giving:\u003c\/p\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eAccurate, consistent switching\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eReliable operation in narrow or cluttered sumps\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eDefined and predictable on\/off levels\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eNo snagging against chamber walls\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eOff and On levels:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l2 level1 lfo2; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cb\u003eOn:\u003c\/b\u003e 285 mm\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l2 level1 lfo2; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cb\u003eOff:\u003c\/b\u003e 100 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ci\u003eThe diagram below illustrates the advantages of the tube float design and why it performs so well in confined spaces compared to standard pendant floats.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" alt=\"Water Pump Float Switch Diagram\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Water_Pump_Float_Diagram.png?v=1764710528\"\u003e\u003c\/div\u003e\n\u003cp class=\"MsoNormal\"\u003eThis makes the POMA5 especially popular in basements, cellars, and processing plants where space is restricted and reliability is critical.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eDurable Construction for Demanding Conditions\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe pump is engineered and designed for longevity with minimal maintenance requirements:\u003c\/p\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cb\u003eTop cover \u0026amp; handle:\u003c\/b\u003e GFRP\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cb\u003ePump casing \u0026amp; outlet:\u003c\/b\u003e GFRP\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cb\u003eImpeller:\u003c\/b\u003e GFRP\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cb\u003eShaft:\u003c\/b\u003e Stainless Steel 410S\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cb\u003eMechanical seal:\u003c\/b\u003e Silicon carbide\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cb\u003eLubrication:\u003c\/b\u003e Paraffin oil (food-safe – suitable for processing \u0026amp; aquaculture)\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cb\u003eStrainer:\u003c\/b\u003e GFRP\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cb\u003eLevel switch:\u003c\/b\u003e GFRP \u0026amp; Stainless Steel 304\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eThe pump is fully submersible and supplied with \u003cb\u003e10 m of heavy-duty power cable\u003c\/b\u003e as standard.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eDomestic \u0026amp; Industrial Versions Available\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e230V Options\u003c\/b\u003e\u003c\/p\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo4; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cb\u003eDomestic model:\u003c\/b\u003e Supplied with a hose tail, hose clip, and a fitted 3-pin plug (5A fuse).\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo4; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e\n\u003cb\u003eIndustrial model:\u003c\/b\u003e Female BSP outlet for rigid pipework. No plug or hose tail supplied - intended to be hardwired.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e110V Options\u003c\/b\u003e\u003c\/p\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l0 level1 lfo5; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eSupplied as \u003cb\u003eindustrial versions only\u003c\/b\u003e (no plug, no hose tail).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"MsoNormal\"\u003eIdeal Applications\u003c\/h4\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo6; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eDomestic and industrial sumps\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo6; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eNarrow chambers \u0026amp; confined installations\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo6; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eBasements \u0026amp; cellars\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo6; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eUtilities \u0026amp; processing plants\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo6; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eLight industrial and commercial drainage\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo6; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eAquaculture \u0026amp; food processing (paraffin-oil lubrication)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eFluids:\u003c\/b\u003e Clean or dirty water\u003cbr\u003e\u003cb\u003eTemperature range:\u003c\/b\u003e 0–40°C\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ci\u003eNot recommended for ponds or decorative water features.\u003c\/i\u003e\u003c\/p\u003e\n\u003ch4 class=\"MsoNormal\"\u003eWhy Choose the Tsurumi POMA5?\u003c\/h4\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo7; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eCompact footprint for tight chambers\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo7; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003ePrecisely controlled tube float switching\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo7; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eHandles suspended soft solids\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo7; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eHighly energy efficient\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo7; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eBuilt with long-lasting, corrosion-resistant components\u003c\/li\u003e\n\u003cli style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo7; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eTrusted by utilities, installers, and industry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's in the box:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e✅\u003c\/span\u003e\u003c\/strong\u003e1x POMA Pump\u003c\/li\u003e\n\u003cli\u003e✅1x 10m Heavy duty rubber power cable\u003c\/li\u003e\n\u003cli\u003e✅1x Hose Tail with domestic model only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tsurumi Pumps","offers":[{"title":"POMA5 - Industrial - 110v - Auto","offer_id":47488560660799,"sku":"10-10-1257","price":429.0,"currency_code":"GBP","in_stock":true},{"title":"POMA5 - Industrial - 230v - Auto","offer_id":47488560693567,"sku":"10-10-1072","price":470.83,"currency_code":"GBP","in_stock":true},{"title":"POMA5 - Domestic - 230v - Auto (3 Pin Plug)","offer_id":47488560726335,"sku":"10-10-1179","price":462.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Tsurumi_POMA.jpg?v=1730894643"},{"product_id":"tsurumi-lsc1-4s-puddle-sucker-pump","title":"Tsurumi LSC1.4S Puddle Sucker Pump | Manual, Pumps to 1mm","description":"\u003ch2\u003eTsurumi LSC1.4S Manual Puddle Sucker Pump - Removes Water Down to 1mm\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTsurumi LSC1.4S Manual\u003c\/strong\u003e is a professional puddle sucker pump designed for controlled removal of shallow floodwater and standing water from flat surfaces.\u003c\/p\u003e\n\u003cp\u003eIts specialist design allows it to pump water down to approximately \u003cstrong\u003e1mm\u003c\/strong\u003e, making it ideal for floors, basements, garages, lift shafts, flat roofs and construction sites where a conventional submersible pump would leave a deeper layer of water behind.\u003c\/p\u003e\n\u003cp\u003eThe manual LSC1.4S delivers up to \u003cstrong\u003e170 litres per minute\u003c\/strong\u003e, has a maximum head of \u003cstrong\u003e11 metres\u003c\/strong\u003e and is available in either 110V or 230V.\u003c\/p\u003e\n\u003cp\u003eIt is manufactured by Tsurumi Pumps and supplied with a \u003cstrong\u003e3-year product guarantee\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat is the Tsurumi LSC1.4S Manual used for?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRemoving shallow floodwater from buildings\u003c\/li\u003e\n\u003cli\u003eDraining garages, basements and cellars\u003c\/li\u003e\n\u003cli\u003eClearing water from commercial and industrial floors\u003c\/li\u003e\n\u003cli\u003eLift shaft and service pit drainage\u003c\/li\u003e\n\u003cli\u003eFlat roof drainage\u003c\/li\u003e\n\u003cli\u003eConstruction site dewatering\u003c\/li\u003e\n\u003cli\u003eUtilities and infrastructure work\u003c\/li\u003e\n\u003cli\u003eHire fleet applications\u003c\/li\u003e\n\u003cli\u003eEmergency and portable water removal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs the Tsurumi LSC1.4S a manual or automatic pump?\u003c\/h3\u003e\n\u003cp\u003eThis product listing is the \u003cstrong\u003emanual Tsurumi LSC1.4S\u003c\/strong\u003e. It starts when the electrical supply is switched on and stops when the power is switched off.\u003c\/p\u003e\n\u003cp\u003eIt does not include a float switch, water sensor or automatic control panel. This gives the operator direct control and allows the pump to continue working at very low water levels.\u003c\/p\u003e\n\u003cp\u003eThe manual version should be monitored during use and switched off once pumping is complete.\u003c\/p\u003e\n\u003ch3\u003ePrefer Automatic?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNeed unattended water-level control?\u003c\/strong\u003e See the \u003ca title=\"Automatic Tsurumi LSC1.4S puddle pump\" href=\"https:\/\/floodandwaterpumps.co.uk\/products\/tsurumi-lsc-1-4s-puddle-sucker-pump-automatic\"\u003eautomatic Tsurumi LSC1.4S puddle pump\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat is the best manual puddle pump for floodwater?\u003c\/h3\u003e\n\u003cp\u003eThe Tsurumi LSC1.4S from \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/\"\u003eFlood \u0026amp; Water Pumps\u003c\/a\u003e is widely regarded as one of the leading professional manual puddle pumps for floodwater and surface-water removal.\u003c\/p\u003e\n\u003cp\u003eIt combines a maximum flow rate of 170 litres per minute with the ability to pump down to approximately 1mm. Its robust construction, built-in non-return valve and top-discharge cooling arrangement also make it well suited to repeated use by contractors, utilities, hire fleets and flood-response teams.\u003c\/p\u003e\n\u003cp\u003eIt is particularly suitable where an operator will be present and wants direct control over when the pump starts and stops.\u003c\/p\u003e\n\u003ch3\u003eHow low can the manual Tsurumi LSC1.4S pump?\u003c\/h3\u003e\n\u003cp\u003eThe manual LSC1.4S can remove standing water down to approximately \u003cstrong\u003e1mm.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe specially designed bottom plate allows water to enter the pump at an extremely low level. For the best result, the pump should be placed on a reasonably flat surface with a clear route for water to reach the inlet.\u003c\/p\u003e\n\u003cp\u003eThe final residual depth may vary where the floor is uneven, debris obstructs the inlet or water is trapped within isolated hollows.\u003c\/p\u003e\n\u003ch3\u003eHow much water can the Tsurumi LSC1.4S pump?\u003c\/h3\u003e\n\u003cp\u003eThe LSC1.4S delivers a maximum flow rate of up to \u003cstrong\u003e170 litres per minute\u003c\/strong\u003e and has a maximum head of \u003cstrong\u003e11 metres\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eMaximum flow and maximum head occur at different points on the pump curve. The actual flow will depend on the vertical pumping height, hose diameter, hose length, bends, fittings and other resistance within the discharge arrangement.\u003c\/p\u003e\n\u003ch3\u003eCan the Tsurumi LSC1.4S pump dirty floodwater?\u003c\/h3\u003e\n\u003cp\u003eThe LSC1.4S is suitable for drainage water and typical floodwater containing sand, silt and small suspended material. It can handle solids up to approximately \u003cstrong\u003e5mm.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is not intended for raw sewage, heavily contaminated water or water containing large stones, leaves or fibrous material.\u003c\/p\u003e\n\u003ch3\u003eDoes the LSC1.4S prevent water flowing back?\u003c\/h3\u003e\n\u003cp\u003eYes. An integral non-return valve helps prevent water held within the discharge hose from flowing back through the pump when it is switched off.\u003c\/p\u003e\n\u003cp\u003eThis is particularly useful during low-level drainage, cellars or basements, because returning hose water could otherwise refill part of the area that has just been pumped dry.\u003c\/p\u003e\n\u003ch3\u003eCan the outlet be positioned horizontally or vertically?\u003c\/h3\u003e\n\u003cp\u003eYes. The discharge outlet can be positioned horizontally or vertically to suit the installation and hose route.\u003c\/p\u003e\n\u003cp\u003eChoosing the most suitable outlet position can reduce hose kinking and help maintain flow where the hose must travel upwards, around equipment or beneath an obstruction.\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Tsurumi LSC1.4S horizontal and vertical discharge outlet\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Tsurumi_LSC_1_4.jpg?v=1766919529\"\u003e\u003c\/div\u003e\n\u003ch3\u003eCan the manual LSC1.4S operate at low water levels?\u003c\/h3\u003e\n\u003cp\u003eYes. Its top-discharge design creates an air and water-cooling route around the motor, allowing the pump to operate for extended periods in shallow and seepage-water conditions.\u003c\/p\u003e\n\u003cp\u003eThe pump should not be deliberately left running dry for prolonged periods. It should be switched off once water is no longer reaching the inlet.\u003c\/p\u003e\n\u003ch3\u003eShould I choose the manual or automatic Tsurumi LSC1.4S?\u003c\/h3\u003e\n\u003cp\u003eChoose the \u003cstrong\u003emanual LSC1.4S\u003c\/strong\u003e for portable flood response, temporary drainage and situations where an operator will control the pump directly.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003eautomatic LSC1.4S\u003c\/strong\u003e where the pump needs to respond to changing water levels without someone being present to switch it on and off. The automatic version is more appropriate for fixed drainage systems, narrow sumps, lift shafts and recurring water ingress.\u003c\/p\u003e\n\u003ch3\u003eShould I choose the 110V or 230V model?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e110V:\u003c\/strong\u003e Normally selected for construction sites and professional environments using a suitable 110V centre-tapped transformer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e230V:\u003c\/strong\u003e Suitable for connection to a compatible standard UK domestic or commercial electrical supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways confirm the available electrical supply before selecting the pump.\u003c\/p\u003e\n\u003ch3\u003eShould I choose a 25mm or 50mm outlet?\u003c\/h3\u003e\n\u003cp\u003eThe Tsurumi LSC1.4S is supplied with a \u003cstrong\u003e25mm outlet as standard\u003c\/strong\u003e. A 50mm outlet option can be selected when ordering.\u003c\/p\u003e\n\u003cp\u003eA larger-diameter hose generally creates less friction resistance, particularly over longer distances. The best outlet size will depend on the required hose route, storage space and the flow needed at the actual pumping height.\u003c\/p\u003e\n\u003ch3\u003eConstruction and Build Quality\u003c\/h3\u003e\n\u003cp\u003eThe Tsurumi LSC1.4S is engineered for demanding professional use. Its pressed-steel outer casing protects the motor, while the cast-aluminium pump stand provides strength and stability.\u003c\/p\u003e\n\u003cp\u003eRubber and urethane wear components provide resistance to abrasive site water containing suspended sand and silt. A silicon carbide mechanical seal and oil-lifter arrangement help provide reliable seal lubrication in different operating positions.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManual on and off control\u003c\/li\u003e\n\u003cli\u003ePumps water down to approximately 1mm\u003c\/li\u003e\n\u003cli\u003eMaximum flow rate of 170 litres per minute\u003c\/li\u003e\n\u003cli\u003eMaximum head of 11 metres\u003c\/li\u003e\n\u003cli\u003e480W single-phase motor\u003c\/li\u003e\n\u003cli\u003eHandles suspended solids up to 6mm\u003c\/li\u003e\n\u003cli\u003eHorizontal or vertical discharge position\u003c\/li\u003e\n\u003cli\u003eIntegral non-return valve helps reduce backflow\u003c\/li\u003e\n\u003cli\u003eTop-discharge cooling for extended low-level operation\u003c\/li\u003e\n\u003cli\u003eAvailable in 110V or 230V\u003c\/li\u003e\n\u003cli\u003eChoice of 25mm or 50mm outlet\u003c\/li\u003e\n\u003cli\u003e3-year Tsurumi product guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the box?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Tsurumi LSC1.4S manual puddle sucker pump\u003c\/li\u003e\n\u003cli\u003e1 × 10 metre heavy-duty rubber power cable\u003c\/li\u003e\n\u003cli\u003e1 × hose tail in the selected outlet size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLooking for an alternative puddle pump?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLower-cost manual option:\u003c\/strong\u003e \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/puddle-pumps\/products\/stream-spk530-puddle-sucker\"\u003eStream SPK530 puddle sucker pump\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher-powered manual option:\u003c\/strong\u003e \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/puddle-pumps\/products\/evak-residox-puddle-sucker-pump\"\u003eEVAK Residox manual puddle pump\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic water-level control:\u003c\/strong\u003e \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/tsurumi-lsc-1-4s-puddle-sucker-pump-automatic\"\u003eAutomatic Tsurumi LSC1.4S puddle pump\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tsurumi Pumps","offers":[{"title":"LSC1.4S 230v (Domestic) 25mm Outlet","offer_id":47492488954175,"sku":"10-10-1233","price":387.5,"currency_code":"GBP","in_stock":true},{"title":"LSC1.4S 110v (industrial) 25mm Outlet","offer_id":47492488986943,"sku":"10-10-1186","price":391.67,"currency_code":"GBP","in_stock":true},{"title":"LSC1.4S 230v (Domestic) 50mm Outlet","offer_id":47492489150783,"sku":"10-10-1256","price":391.67,"currency_code":"GBP","in_stock":true},{"title":"LSC1.4S 110v (industrial) 50mm Outlet","offer_id":47492489183551,"sku":"10-10-1024","price":395.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Tsurumi_LSC_1.4S_Booth_FAWP.jpg?v=1783347180"},{"product_id":"tsurumi-50pni2-auto-submersible-drainage-pump","title":"Tsurumi 50PNI2 Automatic Submersible Drainage Pump | 304 Stainless","description":"\u003ch2\u003eCompact Auto Submersible Drainage Pump for Narrow Sumps and Precise Level Control\u003c\/h2\u003e\n\u003cp\u003eThe Tsurumi 50PNI2 is an automatic submersible drainage pump manufactured by Tsurumi Pump. It is designed for sewage and drainage applications and features GFRP (glass fibre-reinforced polymer) construction, vortex impellers and a silicon carbide shaft seal. The bell-shaped, compact float design makes the 50PNI2 well suited to applications where a sump is narrow, where precise water level control is required, or where a traditional pendant-type float could be fouled.\u003c\/p\u003e\n\u003ch3\u003eWhat is the Tsurumi 50PNI2 used for?\u003c\/h3\u003e\n\u003cp\u003e•    Basement flooding drainage\u003cbr\u003e•    Sump pumping\u003cbr\u003e•    Domestic drainage applications\u003cbr\u003e•    Utilities\u003cbr\u003e•    Processing applications\u003c\/p\u003e\n\u003ch3\u003eConstruction and Durability\u003c\/h3\u003e\n\u003cp\u003eThe pump body is GFRP construction, providing corrosion resistance and durability. Vortex impellers allow solids to pass through the pump without direct contact with the impeller blades, reducing blockage risk. The silicon carbide shaft seal provides wear resistance in demanding conditions. The bell-shaped compact floats offer more precise on\/off water level control than pendant-type floats, and are less likely to be fouled in confined or narrow sump installations. Free passage is 10mm on both models.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the Tsurumi 50PNI2?\u003c\/h3\u003e\n\u003cp\u003eThe compact float design sets the 50PNI2 apart in applications where standard pendant floats are impractical or unreliable. Both models are automatic, removing the need for external level controls. An optional auto-coupling (TOK4-P) is available for permanent sump installations where the pump needs to be raised and lowered without disconnecting pipework. Available in two power ratings to suit the application.\u003c\/p\u003e\n\u003ch3\u003eOperational Details\u003c\/h3\u003e\n\u003cp\u003e•    Construction: GFRP pump body with vortex impeller\u003cbr\u003e•    Shaft seal: silicon carbide\u003cbr\u003e•    Float type: bell-shaped compact auto float\u003cbr\u003e•    Free passage: 10mm\u003cbr\u003e•    Outlet: 2\" BSPF\u003cbr\u003e•    Available models: 50PNI2.4S(A) (0.40kW, max head 12m) and 50PNI2.75S(A) (0.75kW, max head 15.5m)\u003cbr\u003e•    Supply: 230V single phase\u003cbr\u003e•    Optional accessory: auto-coupling TOK4-P (0.40kW to 0.75kW motor sizes)\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp\u003e•    Tsurumi 50PNI2 submersible pump \u003cbr\u003e\u003c\/p\u003e","brand":"Tsurumi Pumps","offers":[{"title":"50PNI2.75S (A) \/ Auto Coupling TOK4-P (Motor Sizes 0.4kW to 0.75kW)","offer_id":47500774015295,"sku":"","price":973.33,"currency_code":"GBP","in_stock":true},{"title":"50PNI2.75S (A) \/ No Added Extra","offer_id":49655654318399,"sku":"10-10-1300","price":690.83,"currency_code":"GBP","in_stock":true},{"title":"50PNI2.4S (A) \/ Auto Coupling TOK4-P (Motor Sizes 0.4kW to 0.75kW)","offer_id":56287516393851,"sku":null,"price":790.0,"currency_code":"GBP","in_stock":true},{"title":"50PNI2.4S (A) \/ No Added Extra","offer_id":56287516426619,"sku":"10-10-1292","price":507.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/tsurumi-50pni2-auto-submersible-drainage-pump-choose-model-auto-coupling-tok4-p-motor-sizes-0.40kw-to-0.75kw-8279-p.jpg?v=1704380337"},{"product_id":"sensor-extension-probes-lsc","title":"Sensor Extension Probes LSC\/LB","description":"\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eSensor\u003c\/strong\u003e\u003cspan\u003e is an electronic switch with stainless steel probes encapsulated in impact resistant moulded rubber, they are 170mm. When the probes touch water, the pump will start and continue to operate for one minute after the water falls below it. However, if the water touches the probe within this time, the “stop” signal is cancelled and the pump continues to run until the water is cleared. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Probe extensions are only available on the LSC Sensor options.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/youtu.be\/_kghWAEYQQI?feature=shared\" title=\"LSC Sensor Extension Probes\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eWatch the video here \u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Tsurumi Pumps","offers":[{"title":"Default Title","offer_id":47520943735103,"sku":"","price":35.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/170mm-sensor-extension-probes-lsc-7434-p-656784.png?v=1721136491"},{"product_id":"app-sv-submersible-stainless-steel-pump","title":"APP SV Stainless Steel Submersible Sewage Pump | 27–37mm Solids","description":"\u003ch2\u003eAPP SV Submersible Sewage Pumps – Robust Wastewater, Dirty Water \u0026amp; Solids Handling Solutions\u003c\/h2\u003e\n\u003cp\u003eThe APP SV Submersible Sewage Pump range is a reliable and cost-effective solution for pumping wastewater, effluent, and dirty water in domestic, commercial, and hire-fleet environments. Built with cast iron pump casings, recessed vortex impellers, and stainless steel motor frames, the SV range is engineered for dependable performance, low maintenance, and long service life in demanding conditions.\u003c\/p\u003e\n\u003ch3\u003eWhat is the APP SV Submersible Sewage Pump used for?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDomestic wastewater and light sewage pumping\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirty water, effluent, and soft solids handling\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSumps, cellars, and drainage pits\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSite water and temporary pumping applications\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHire fleet and contractor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConstruct and Durability\u003c\/h3\u003e\n\u003cp\u003eThe APP SV series is constructed for durability and everyday reliability. Each pump features a heavy-duty cast iron casing combined with a vortex-style impeller to allow solids to pass freely without clogging. Motor frames are manufactured from 304 stainless steel for corrosion resistance, while larger models use cast iron components for added strength. High-quality mechanical seals and oil chambers protect the motor, ensuring long-term operation even in harsh wastewater environments.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the APP SV Submersible Sewage Pumps?\u003c\/h3\u003e\n\u003cp\u003eThe APP SV range offers an excellent balance of performance, robustness, and value. Designed to handle common wastewater solids without the need for grinders or cutters, these pumps are simple, efficient, and economical to run. With multiple sizes, voltage options, and automatic or manual configurations, the SV series suits a wide range of applications. Their proven reliability also makes them a popular choice for hire fleets and professional users, all backed by a 2-year manufacturer’s guarantee.\u003c\/p\u003e\n\u003ch3\u003eOperational Details\u003c\/h3\u003e\n\u003cp\u003eModels available: SV-150, SV-250, SV-400, SV-750\u003cbr\u003eMotor power:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSV-150: 150 W\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSV-250: 250 W\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSV-400: 400 W\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSV-750: 750 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMaximum flow rates:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSV-150: approx. 170 L\/min\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSV-250: approx. 220 L\/min\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSV-400: approx. 350 L\/min\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSV-750: approx. 425 L\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMaximum head:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSV-150: 5.7 m\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSV-250: 7.5 m\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSV-400: 8 m\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSV-750: 11 m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSolids handling:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSV-150 \u0026amp; SV-250: up to 27 mm (soft and fibrous solids)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSV-400 \u0026amp; SV-750: approx. 35–37 mm (hard and fibrous solids)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOutlet sizes: 32 mm to 80 mm (model dependent)\u003c\/p\u003e\n\u003cp\u003eVoltage options:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSV-150 \u0026amp; SV-250: 230 V only\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSV-400 \u0026amp; SV-750: 110 V or 230 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance and Specifications\u003c\/h3\u003e\n\u003cp\u003eThe SV-150 delivers a maximum flow of around 170 litres\/min with a 5.7 m head, while the SV-250 increases this to 220 litres\/min with a 7.5 m head.\u003cbr\u003eThe SV-400 provides approximately 350 litres\/min with an 8 m head, and the largest model, the SV-750, reaches up to 425 litres\/min with a maximum head of 11 m.\u003c\/p\u003e\n\u003cp\u003eHead height is a measure of pressure, for water, 1 metre of head is approximately equal to 0.1 bar.\u003c\/p\u003e\n\u003ch4 class=\"MsoNormal\"\u003eSV-150 and SV-250\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003c!-- [if !supportLists]--\u003eAutomatic only\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eCan be supplied with either a pendant float switch or tube float switch for narrow sumps\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSV-400 and SV-750\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003c!-- [if !supportLists]--\u003eAvailable in manual or automatic versions\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAutomatic models feature a pendant float switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp\u003e1x APP SV Submersible Sewage Pump\u003cbr\u003e1x 10 m heavy-duty rubber power cable\u003cbr\u003e1x hose tail\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"APP","offers":[{"title":"SV150 230v Automatic (3 Pin Domestic Plug)","offer_id":47523761324351,"sku":"15-10-1050","price":220.83,"currency_code":"GBP","in_stock":true},{"title":"SV150(V) Tube Float 230v Automatic (3 Pin Domestic Plug)","offer_id":47523761357119,"sku":"15-10-1048","price":229.17,"currency_code":"GBP","in_stock":true},{"title":"SV250 230v Manual (3 Pin Domestic Plug)","offer_id":47523761389887,"sku":"15-10-1043","price":254.17,"currency_code":"GBP","in_stock":true},{"title":"SV250(V) Tube Float 230v Automatic (3 Pin Domestic Plug)","offer_id":55956472693115,"sku":"15-10-1057","price":304.17,"currency_code":"GBP","in_stock":true},{"title":"SV250 230v Automatic (3 Pin Domestic Plug)","offer_id":47523761422655,"sku":"15-10-1110","price":274.17,"currency_code":"GBP","in_stock":true},{"title":"SV400 110v Automatic (Industrial)","offer_id":47523761520959,"sku":"15-10-1028","price":354.17,"currency_code":"GBP","in_stock":true},{"title":"SV400 230v Manual (3 Pin Domestic Plug)","offer_id":47523761488191,"sku":"15-10-1070","price":315.83,"currency_code":"GBP","in_stock":true},{"title":"SV400 230v Automatic (3 Pin Domestic Plug)","offer_id":47523761553727,"sku":"15-10-1023","price":354.17,"currency_code":"GBP","in_stock":true},{"title":"SV750 110v Manual (Industrial)","offer_id":47523761586495,"sku":"15-10-1081","price":457.5,"currency_code":"GBP","in_stock":true},{"title":"SV750 110v Automatic (Industrial)","offer_id":47523761619263,"sku":"15-10-1016","price":562.5,"currency_code":"GBP","in_stock":true},{"title":"SV750 230v Manual (3 Pin Domestic Plug)","offer_id":47523879190847,"sku":"15-10-1031","price":499.17,"currency_code":"GBP","in_stock":true},{"title":"SV750 230v Automatic (3 Pin Domestic Plug)","offer_id":47523879223615,"sku":"15-10-1083","price":562.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/SV_MAnual_Sewage_Pump.jpg?v=1730894104"},{"product_id":"app-bcv-submersible-sewage-pump","title":"APP BCV Vortex Sewage Pump | Submersible, 50–80mm Solids","description":"\u003ch2\u003eAPP BCV Submersible Sewage Vortex Pumps\u003c\/h2\u003e\n\u003cp\u003eThe APP BCV range of submersible sewage vortex pumps is designed for demanding wastewater and solids‑handling applications. Built for reliability, high flow rates and excellent solids passage, BCV pumps are a trusted solution across agriculture, sewage treatment and industrial pumping environments. Each pump in the range is supplied with a full 2‑year manufacturer guarantee, giving total confidence in long‑term performance.\u003c\/p\u003e\n\u003ch3\u003eWhat is the APP BCV pump used for?\u003c\/h3\u003e\n\u003cp\u003eThe APP BCV pump is used for pumping sewage, wastewater and effluent containing suspended solids and fibrous materials. Thanks to its vortex impeller design and wide internal clearances, the BCV range can comfortably handle solids from 50mm up to 80mm, depending on the model. Typical applications include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSewage treatment plants\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePumping stations and lift stations\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAgricultural waste and slurry transfer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndustrial effluent handling\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSite drainage where solids are present\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBCV pumps are not recommended for ponds or water features due to their industrial design and solids‑handling focus.\u003c\/p\u003e\n\u003ch3\u003eConstruction and Durability\u003c\/h3\u003e\n\u003cp\u003eThe APP BCV range is built for harsh environments and continuous operation. With the exception of the BCV‑400, all models feature cast iron head covers, impellers and pump casings to maximise strength and wear resistance. Key construction features include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVortex impeller housed in an extra‑wide pump casing for clog‑free operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e410 stainless steel shaft for enhanced corrosion and wear resistance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDouble mechanical seals running in an oil chamber to protect the motor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeavy‑duty industrial build suitable for long service life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis robust construction makes the BCV series a dependable choice for commercial and agricultural users who need a pump that can perform day in, day out.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the APP BCV pump?\u003c\/h3\u003e\n\u003cp\u003eThe APP BCV pump range offers an excellent balance of performance, durability and value for money. Designed to cope with difficult pumping conditions, these pumps are particularly popular where reliability is critical. Key benefits include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent solids handling from 50mm to 80mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh flow rates with reduced risk of blockage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndustrial‑grade materials at a competitive price point\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for manual or automatic operation (model dependent)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2‑year manufacturer guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor users looking for a cost‑effective yet heavy‑duty sewage pump, the BCV range delivers proven performance without premium pricing.\u003c\/p\u003e\n\u003ch3\u003eOperational Details\u003c\/h3\u003e\n\u003cp\u003eAPP BCV pumps are supplied ready for immediate installation and operation. All models come with 10 metres of heavy‑duty rubber power cable as standard. For installations requiring guide rails, an optional auto‑coupling kit is available as an upgrade, allowing easy pump removal and maintenance without entering the sump.\u003c\/p\u003e\n\u003cp\u003eAvailable in a wide range of power outputs and outlet sizes, the BCV series supports both single‑phase and three‑phase installations across industrial and agricultural sites.\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e1 × APP BCV Submersible Pump\u003cbr\u003e1 × 10m heavy‑duty rubber power cable\u003cbr\u003e1 × hose tail\u003c\/p\u003e\n\u003cp\u003eAuto‑coupling kits and guide rail accessories are available separately if required.\u003c\/p\u003e","brand":"APP","offers":[{"title":"BCV400-50 230v Manual","offer_id":47531170660671,"sku":"15-10-1003","price":374.17,"currency_code":"GBP","in_stock":true},{"title":"BCV400-50A 230v Auto","offer_id":47531170824511,"sku":"15-10-1102","price":432.5,"currency_code":"GBP","in_stock":true},{"title":"BCV750-50 230v Manual","offer_id":47531170890047,"sku":"15-10-1100","price":574.17,"currency_code":"GBP","in_stock":true},{"title":"BCV750-50A 230v Auto","offer_id":47531170988351,"sku":"15-10-1080","price":615.83,"currency_code":"GBP","in_stock":true},{"title":"BCV750-65 230v Manual","offer_id":47531171021119,"sku":"15-10-1014","price":690.83,"currency_code":"GBP","in_stock":true},{"title":"BCV750-65 400v Manual (3 Phase)","offer_id":47531171053887,"sku":"15-10-1045","price":690.83,"currency_code":"GBP","in_stock":true},{"title":"BCV750-65A 230v Auto","offer_id":47531171086655,"sku":"15-10-1035","price":732.5,"currency_code":"GBP","in_stock":true},{"title":"BCV1500-50 230v Manual","offer_id":47531171119423,"sku":"15-10-1087","price":879.17,"currency_code":"GBP","in_stock":true},{"title":"BCV1500-50 400v Manual (3 Phase)","offer_id":47531171152191,"sku":"15-10-1072","price":837.5,"currency_code":"GBP","in_stock":true},{"title":"BCV1500-70 230v Manual","offer_id":47531171217727,"sku":"15-10-1052","price":1045.83,"currency_code":"GBP","in_stock":true},{"title":"BCV1500-70 400v Manual (3 Phase)","offer_id":47531171250495,"sku":"15-10-1059","price":1045.83,"currency_code":"GBP","in_stock":true},{"title":"BCV1500-70A 230v Auto","offer_id":47531171283263,"sku":"15-10-1033","price":1107.5,"currency_code":"GBP","in_stock":true},{"title":"BCV3700-80 400v Manual (3 Phase)","offer_id":47531171414335,"sku":"15-10-1037","price":1774.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/BCV-400A_high_res.jpg?v=1730896644"},{"product_id":"app-dspk-submersible-cutter-pump","title":"APP DSPK Submersible Cutter Sewage Pump","description":"\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003ch2\u003eAPP DSPK Submersible Cutter Pump – Heavy‑Duty Sewage \u0026amp; Wastewater Solids Shredding Solution\u003c\/h2\u003e\n\u003cdiv\u003eThe APP DSPK Submersible Cutter Pump is designed for pumping sewage and wastewater containing solids. It uses a tungsten-tipped impeller to shred fibrous materials, preventing blockages. Ideal for domestic, commercial, and industrial applications, it reliably handles dirty water in sumps, basements, treatment plants, and sewage systems.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe DSPK (formerly DSK) range of submersible cutter pumps are ideal for heavy duty settings, and breaking down solids in sewage. This is useful when solids restrict the free movement of liquid. \u003c\/p\u003e\n\u003cp\u003eThese pumps have a \u003cstrong\u003etwo-year manufacturer’s guarantee\u003c\/strong\u003e and are suitable for domestic or industrial use, including in basements and in waste tanks.\u003c\/p\u003e\n\u003ch2\u003eConstruction and Build Quality\u003c\/h2\u003e\n\u003cp\u003eThe DSPK Sewage pumps are constructed in cast iron and 304 stainless steel, fitted with a tungsten carbide tipped single channel, cast iron impeller which rotates against a serrated suction cover. The 410 stainless steel shaft is fitted with a mechanical seal and oil seal, in an oil chamber for excellent wear resistance.\u003c\/p\u003e\n\u003cp\u003eSingle phase models are available with or without a float switch.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eHigh-Efficiency Solids Cutting:\u003c\/strong\u003e The defining feature of the DSPK series is its \u003cstrong\u003ecutter impeller system\u003c\/strong\u003e. By chopping up solids at the intake, the pump can reliably move sewage laden with wipes, sanitary products, or fibrous matter without clogging.\u003c\/div\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eHeavy-Duty Build for Sewage Applications:\u003c\/strong\u003e These pumps are engineered for \u003cstrong\u003edemanding environments\u003c\/strong\u003e. The cast iron pump body and impeller provide the strength and durability needed for abrasive or corrosive sewage and waste water.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eWide Performance Range:\u003c\/strong\u003e Whether you need to empty a small septic sump or pump from an industrial waste pit, there’s a DSPK model to match.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eFlexible Installation Options:\u003c\/strong\u003e The DSPK pumps are designed with installation flexibility in mind. \u003cstrong\u003eFree-standing installation\u003c\/strong\u003e is straightforward – the pump has a stable base and an ergonomic handle, so it can be placed at the bottom of a tank or pit and easily retrieved by the handle or an attached chain. For more permanent setups, an \u003cstrong\u003eauto-coupling guide rail kit\u003c\/strong\u003e can be used (available for all sizes). The guide rail system includes a dock at the sump bottom and twin guide pipes; the pump slides down to automatically connect to the outlet elbow. This allows easy removal for inspection by simply pulling the pump up the rails\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eDomestic Sewage and Wastewater Systems\u003c\/li\u003e\n\u003cli\u003eSeptic tank effluent pumping\u003c\/li\u003e\n\u003cli\u003eCommercial Buildings and Facilities\u003c\/li\u003e\n\u003cli\u003eIndustrial and Process Wastewater\u003c\/li\u003e\n\u003cli\u003eMunicipal and Emergency Sewage Bypass\u003c\/li\u003e\n\u003cli\u003eWastewater pumping stations\u003c\/li\u003e\n\u003cli\u003eEnvironmental and treatment facilities\u003c\/li\u003e\n\u003cli\u003eFloodwater that may carry debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cp\u003eSupplied with 10 metres of heavy duty rubber power cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's in the Box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e1 x DPSK Pump\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1 x 10m Heavy duty rubber power cable\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e(DSPK 10 \u0026amp; 20 models also come with hose tail)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e","brand":"APP","offers":[{"title":"DSPK-10 230V","offer_id":47531722015039,"sku":"15-10-1104","price":662.5,"currency_code":"GBP","in_stock":true},{"title":"DSPK-10 230V Auto","offer_id":47531722047807,"sku":"15-10-1085","price":757.5,"currency_code":"GBP","in_stock":true},{"title":"DSPK-20 230V","offer_id":47531722080575,"sku":"15-10-1063","price":895.83,"currency_code":"GBP","in_stock":true},{"title":"DSPK-20 230V Auto","offer_id":47531722113343,"sku":"15-10-1029","price":945.83,"currency_code":"GBP","in_stock":true},{"title":"DSPK-20  400V","offer_id":47531722146111,"sku":"15-10-1067","price":895.83,"currency_code":"GBP","in_stock":true},{"title":"DSPK-30 400V","offer_id":47531722178879,"sku":"15-10-1015","price":1304.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/app-dspk-submersible-cutter-pump-model-dspk.jpg?v=1782297648"},{"product_id":"speroni-cutty-industrial-sewage-pump","title":"Speroni Cutty Grinder Sewage Pump","description":"\u003ch2 class=\"FirstParagraph\"\u003e\n\u003cspan lang=\"EN-US\"\u003eSubmersible grinder pump for pumping sewage long distances through small-bore pipe.\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe Cutty is a submersible grinder pump built for sewage stations and individual properties where gravity drainage isn’t possible. The Cutty is manufactured by \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/speroni-pumps\" rel=\"noopener\" target=\"_blank\"\u003eSperoni Pumps\u003c\/a\u003e. What makes a grinder pump different from a standard sewage pump is the cutting mechanism at the inlet: rotating blades shred solids, fibres, and waste into a pulp before the pump moves it. That pulp can then be pumped through small-bore pipe, sometimes over long distances, without blocking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThis is what makes the Cutty the right choice for sewage installations where standard gravity drainage isn’t an option: properties below the mains sewer level, houses at the end of long driveways, pumping stations serving groups of buildings, or agricultural sites where effluent has to be moved uphill or across distance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003ca name=\"where-this-pump-is-used\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eWhere the Speroni Cutty is Used\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe Cutty is used in \u003cstrong\u003eresidential\u003c\/strong\u003e installations where a single property cannot drain to the mains sewer by gravity, in \u003cstrong\u003eindustrial\u003c\/strong\u003e and commercial sites with below-grade drainage needs, in \u003cstrong\u003eagricultural\u003c\/strong\u003e settings where effluent is pumped to disposal fields or to feed \u003cstrong\u003esprinkling\u003c\/strong\u003e systems, and in \u003cstrong\u003epumping stations\u003c\/strong\u003e serving groups of houses or dwellings. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used;\"\u003e\u003cspan lang=\"EN-US\"\u003eIt is designed for \u003cstrong\u003efixed installations\u003c\/strong\u003e rather than portable use, with the optional auto-coupling allowing it to be mounted permanently on a guide rail and lifted for servicing without anyone entering the chamber.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"choosing-between-the-two-sizes\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eChoosing Between the Two Sizes and Different Models\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: choosing-between-the-two-sizes;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe Cutty 200 is the standard size for most residential and light commercial work: 1.5kW motor, 340 l\/min flow, 17m head. \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: choosing-between-the-two-sizes;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe Cutty 250 steps up to 1.85kW with 400 l\/min and 27m head, which matters when pumping longer distances or up steeper gradients. \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"mso-bookmark: choosing-between-the-two-sizes;\"\u003e\u003cspan lang=\"EN-US\"\u003eFor a single property with a normal run to the mains sewer, the 200 is usually sufficient. For pumping stations serving multiple dwellings or where the discharge run is long, the 250 is the safer specification.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan style=\"mso-bookmark: choosing-between-the-two-sizes;\"\u003e\u003cspan lang=\"EN-US\"\u003eBoth sizes come in 230V single-phase and 400V three-phase. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cstrong\u003e\u003cspan style=\"mso-bookmark: choosing-between-the-two-sizes;\"\u003e\u003cspan lang=\"EN-US\"\u003eSingle-phase versions are supplied with an external starter box. Three-phase versions do not need or include the starter box.\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"mso-bookmark: choosing-between-the-two-sizes;\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"optional-auto-coupling\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eAuto-Coupling\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: optional-auto-coupling;\"\u003e\u003cspan lang=\"EN-US\"\u003eAn auto-coupling accessory is available for guide-rail mounting in permanent pumping station installations. With this fitted, the pump can be lifted out for servicing without anyone having to enter the pumping chamber. For any permanent installation, the auto-coupling is strongly recommended; it transforms routine maintenance. This is supplied on the pumps marked \"With Auto-Coupling\".\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan lang=\"EN-US\"\u003eHow the Cutting Mechanism Works\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan lang=\"EN-US\"\u003eThe Cutty has an open impeller with a stainless steel cutting disk at the inlet and a matching stainless steel cutter on the impeller. As the pump runs, waste is drawn in past these two components, which shred it between them before it enters the impeller chamber. The pulp is then moved on to the outlet under pressure. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan lang=\"EN-US\"\u003eCast iron pump body and cast iron impeller keep the pump robust under the abrasive conditions of sewage work.\u003c\/span\u003e\u003c\/p\u003e","brand":"Speroni","offers":[{"title":"Cutty-200 \/N 230V","offer_id":47531933925695,"sku":"19-10-1005","price":1449.17,"currency_code":"GBP","in_stock":true},{"title":"Cutty-200 \/N-T 400V","offer_id":47531933958463,"sku":"19-10-1002","price":1129.17,"currency_code":"GBP","in_stock":true},{"title":"Cutty-250 \/N 230V","offer_id":47531933991231,"sku":"19-10-1004","price":1532.5,"currency_code":"GBP","in_stock":true},{"title":"Cutty-250 \/N-T 400V","offer_id":47531934023999,"sku":"19-10-1000","price":1154.17,"currency_code":"GBP","in_stock":true},{"title":"Cutty-200 \/N With Auto-Coupling 230V","offer_id":47531987370303,"sku":"19-10-1005-AC","price":1653.34,"currency_code":"GBP","in_stock":true},{"title":"Cutty-200 \/N-T With Auto-Coupling 400V","offer_id":47531987403071,"sku":"19-10-1002-AC","price":1333.34,"currency_code":"GBP","in_stock":true},{"title":"Cutty-250 \/N With Auto-Coupling 230V","offer_id":47531987435839,"sku":"19-10-1004-AC","price":1736.67,"currency_code":"GBP","in_stock":true},{"title":"Cutty-250 \/N-T With Auto-Coupling 400V","offer_id":47531987468607,"sku":"19-10-1000-AC","price":1358.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/speroni-cutty-industrial-sewage-pump-7284-p-459083.png?v=1721136585"},{"product_id":"speroni-kfm-industrial-peripheral-pump","title":"Speroni KF(M) Brass Peripheral Pump | Industrial \u0026 Boiler Feed","description":"\u003ch2 class=\"FirstParagraph\"\u003eSperoni KFM Peripheral Pump | Cast Iron Pump for Industrial Pressure Boosting and Boiler Feed\u003c\/h2\u003e\n\u003cp class=\"FirstParagraph\"\u003eThe Speroni KF(M) is a cast iron peripheral pump designed for light industrial pressure boosting, boiler feed from stored water, and small circulation loops. Peripheral pumps use a regenerative turbine impeller that carries water around the pump body several times before discharging, adding pressure with each pass. This gives the KF(M) a high head output from a compact, low-power motor. Four models are available across 230V single phase and 400V three phase, all with 1 inch inlet and outlet ports.\u003c\/p\u003e\n\u003ch3 class=\"FirstParagraph\"\u003eWhat is the Speroni KF(M) Industrial Peripheral Pump used for?\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e•    Pressure boosting from a stored water tank (non-potable applications)\u003cbr\u003e•    Boiler feed from stored water (not for direct mains connection)\u003cbr\u003e•    Light industrial pressure boosting in small circulation loops\u003cbr\u003e•    Non-potable welfare units and portable or temporary accommodation\u003cbr\u003e•    Auto-trigger booster systems with an optional pressure controller\u003cbr\u003e•    Light industrial processing and water transfer\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cstrong\u003eOperating Conditions: \u003c\/strong\u003eContinuous duty | Max. ambient temp: 40°C | Max. suction lift (+ foot valve): 7 mtrs\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cstrong\u003eFluid: \u003c\/strong\u003eClean water | Temperature: 0 - 60°C\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cstrong\u003eApplication: \u003c\/strong\u003eIndustry | Processing | Domestic | Boosting | Welfare units | Boiler feed\u003c\/p\u003e\n\u003ch3 class=\"FirstParagraph\"\u003eConstruction and Durability\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003eThe KF(M) is built from cast iron with a brass pump body cover, which distinguishes it from the KP(M) and makes it more commonly specified for industrial and boiler feed applications. The regenerative turbine impeller delivers high head on small motors by recirculating water multiple times before it exits the pump. An optional pressure controller adds dry-run protection and automatic start\/stop on demand.\u003c\/p\u003e\n\u003ch3 class=\"FirstParagraph\"\u003eWhy choose the Speroni KF(M) Industrial Peripheral Pump?\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003eWhere a centrifugal pump would struggle to deliver adequate pressure from a small motor, the peripheral design of the KF(M) builds head efficiently by recirculating the water multiple times through the impeller before it exits. This makes it well suited to boiler feed and boosting duties where sustained pressure matters more than high flow. The brass pump body cover and cast iron construction give it good service life in light industrial environments, and the 1 inch ports on all models keep installation straightforward.\u003c\/p\u003e\n\u003ch3 class=\"FirstParagraph\"\u003eOperational Details\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e•    KFM1 (230V single phase): 0.37 kW\u003cbr\u003e•    KFM2 (230V single phase): 0.6 kW\u003cbr\u003e•    KF1 (400V three phase): 0.37 kW\u003cbr\u003e•    KF2 (400V three phase): 0.6 kW\u003cbr\u003e•    Inlet and outlet: 1 inch BSP on all models\u003cbr\u003e•    Pump body: cast iron with brass cover\u003cbr\u003e•    Not self-priming: requires flooded suction (water source at or above pump inlet)\u003cbr\u003e•    Not WRAS approved: not suitable for drinking water supply\u003cbr\u003e•    For self-priming applications, see the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/speroni-akm60-self-priming-peripheral-pump\" title=\"Speroni AKM60 water pump\"\u003eSperoni AKM60\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eKF(M) or KP(M)?\u003c\/h3\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/floodandwaterpumps.co.uk\/products\/speroni-kpm-industrial-peripheral-pump?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBoth are Speroni cast iron peripheral pumps with similar flow and head. Choose the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/speroni-kpm-industrial-peripheral-pump\"\u003eKP(M)\u003c\/a\u003e as the cost-effective option for general light industrial circulation and boosting. Choose the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/speroni-kfm-industrial-peripheral-pump\"\u003eKF(M)\u003c\/a\u003e, with its brass pump body cover, where the pump runs harder or feeds a boiler and you want the more durable industrial build.\u003c\/p\u003e\n\u003ch4\u003e\n\u003ca name=\"optional-accessories-2\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eOptional Accessories\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: optional-accessories-2;\"\u003e\u003cspan lang=\"EN-US\"\u003eA pressure controller can be added to provide dry-run protection and automatic start\/stop when demand occurs. This turns the KFM into a simple automatic booster unit.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan lang=\"EN-US\"\u003eImportant: WRAS Approval\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cem\u003e\u003cspan lang=\"EN-US\"\u003eThis pump is not WRAS approved and is not for drinking water supply. It is suitable for irrigation, sprinklers, fire systems, rainwater harvesting, cooling loops, and industrial or agricultural water.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 class=\"FirstParagraph\"\u003e\u003cspan lang=\"EN-US\"\u003eWhat's in the box\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan lang=\"EN-US\"\u003e•    1 x Speroni KF(M) peripheral pump \u003c\/span\u003e\u003c\/p\u003e","brand":"Speroni","offers":[{"title":"KFM1 230V","offer_id":47543767433535,"sku":"19-15-1185","price":158.33,"currency_code":"GBP","in_stock":true},{"title":"KF1 400V","offer_id":47543767466303,"sku":"19-15-1057","price":158.33,"currency_code":"GBP","in_stock":true},{"title":"KFM2 230V","offer_id":47543767499071,"sku":"19-15-1068","price":204.17,"currency_code":"GBP","in_stock":true},{"title":"KF2 400V","offer_id":47543767531839,"sku":"19-15-1253","price":204.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/speroni-kf-m-kp-m-industrial-peripheral-pump-choose-model-kf2-_2_-8028-p.jpg?v=1704966899"},{"product_id":"speroni-akm60-self-priming-peripheral-pump","title":"Speroni AKM60 Self-Priming Peripheral Pump | 230V Booster","description":"\u003ch3\u003e\n\u003ca name=\"short-bullet-points\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003ch2 class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eSperoni AKM60 Peripheral Pump | Compact Self Priming Volumetric Pump for Domestic Pressure Systems\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe Speroni AKM60 is a compact self priming volumetric peripheral pump designed for domestic water pressure systems. With its high head, low flow performance and characteristically stable operating curve, the AKM60 is ideal for boosting mains pressure and automatically distributing clean water through small pressure tanks, autoclaves and membrane hydrosphere units.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eWhat is the Speroni AKM60 pump used for?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003e•    Domestic water pressure systems\u003cbr\u003e•    Boosting mains pressure where supply is weak\u003cbr\u003e•    Automatic water distribution behind small pressure tanks and autoclaves\u003cbr\u003e•    Light pressurisation of household plumbing\u003cbr\u003e•    Small membrane hydrosphere units\u003cbr\u003e•    Transfer of clean water with no solids\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eConstruction and Durability\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe AKM60 is built around a cast iron pump body and cast iron motor support, with a brass peripheral impeller and an AISI 304 stainless steel shaft. The mechanical seal is ceramic, graphite and NBR. The peripheral impeller design gives high head from a compact, low power unit and an inherently stable pressure curve, which is why volumetric peripheral pumps are widely chosen for small autoclave installations. Speroni include a No Block System, which helps the pump start cleanly after periods of standing. The motor is a two pole induction unit with Class F insulation and IP44 protection.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eWhy choose the AKM60?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eWhere a centrifugal pump would deliver fluctuating pressure on a small system, the AKM60 keeps it steady. The peripheral impeller produces a clean, stable head curve which works in the AKM60's favour on autoclave installations where smooth automatic on and off cycling is needed. It is self priming up to 7 metres suction lift and Made in Italy by Speroni, giving the build quality expected of long life domestic pressure systems. For owners of small private water supply systems, the AKM60 is a sensible, proven choice.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eOperational Details\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003e•    Power: 0.45 kW \/ 0.6 HP\u003cbr\u003e•    Maximum head: 40 metres\u003cbr\u003e•    Maximum flow: 40 l\/min (2.4 m³\/h)\u003cbr\u003e•    Suction lift: up to 7 metres total\u003cbr\u003e•    Outlet size: 1 inch BSP\u003cbr\u003e•    Voltage: 230V single phase, 50 Hz\u003cbr\u003e•    Current: 3 A\u003cbr\u003e•    Speed: 2,850 RPM\u003cbr\u003e•    Motor protection: IP44, insulation class F\u003cbr\u003e•    Liquid temperature: up to 35°C for domestic use, up to 60°C for other uses\u003cbr\u003e•    Free passage: clean water only, no sand or solid impurities\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eApplications: Industry | Processing | Domestic | Boosting | Circulating\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"Xccdce72a5ea80ef066831d714fdced8a0bdb4ac\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eHow the AKM60 Compares to the KFM and KPM\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: Xccdce72a5ea80ef066831d714fdced8a0bdb4ac;\"\u003e\u003cspan lang=\"EN-US\"\u003eAll three are \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/speroni-pumps\" rel=\"noopener\" target=\"_blank\"\u003eSperoni\u003c\/a\u003e peripheral pumps with similar output characteristics. The difference is self-priming. The AKM60 is self-priming; the KFM and KPM are not. If your pump sits above the water source, choose the AKM60. If the pump has flooded suction (water source above or level with the pump), a KFM or KPM will do the same job for less money.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: Xccdce72a5ea80ef066831d714fdced8a0bdb4ac;\"\u003e\u003cspan lang=\"EN-US\"\u003eWhat's in the box\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: Xccdce72a5ea80ef066831d714fdced8a0bdb4ac;\"\u003e\u003cspan lang=\"EN-US\"\u003e• 1 x Speroni AKM60 self priming peripheral pump\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003ca name=\"optional-accessories\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eAccessories\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: optional-accessories;\"\u003e\u003cspan lang=\"EN-US\"\u003eA pressure controller can be added to provide dry-run protection and automatic start\/stop when a tap or valve is opened. This turns the AKM60 into a simple booster unit without the need for a pressure vessel.\u003c\/span\u003e\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Speroni","offers":[{"title":"Default Title","offer_id":47543821107519,"sku":"","price":115.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/speroni-akm60-self-priming-peripheral-pump-8043-p.jpg?v=1704968184"},{"product_id":"speroni-rsm-horizontal-multistage-pumps","title":"Speroni RS(M) Horizontal Multistage Pumps","description":"\u003ch2 class=\"FirstParagraph\"\u003e\n\u003cspan lang=\"EN-US\"\u003eCast iron horizontal multistage pump for sprinklers, fire systems, and industrial cooling loops.\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe RS(M) is Speroni’s standard horizontal multistage booster pump. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eCast iron construction, stainless steel casing, and a stacked impeller design deliver high head from a modest motor. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cstrong\u003e\u003cspan lang=\"EN-US\"\u003eThis is a workhorse pump found on pressurisation sets, fire-fighting booster systems, and industrial washing lines across the UK.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe RS(M) are multi-staging non-self-priming, horizontal centrifuge pumps. For the pumping of only clean water. They develop high pressures from small motors and operate virtually silent, this makes them great for domestic use, in addition to horticultural and industrial applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe horizontal layout makes this pump easy to install on a floor or mounting plate. If floor space is tight, the vertical equivalent (RV) is the better choice; performance is the same.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"where-this-pump-is-used-14\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eWhere the Speroni RS and RSM are Used\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-14;\"\u003e\u003cspan lang=\"EN-US\"\u003eSprinkler and irrigation pressurisation. Fire-fighting boost systems (with appropriate certification). Industrial washing and process water. Cooling loop circulation. Condensate return systems. Multi-storey buildings fed from stored water (downstream of air gap). Horticultural and agricultural pressurisation.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-14;\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003cstrong\u003eOperating Conditions:\u003c\/strong\u003e Continuous duty | Max. ambient temp: 40°C | Max. suction lift (+ foot valve): 7 mtrs\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-14;\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003cstrong\u003eFluid: \u003c\/strong\u003eClean water | Temperature: 0 - 35°C\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-14;\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-14;\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e Pressurisation units | Fire fighting | Washing | Condensate | Water supply | Cooling\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"choosing-between-the-models-4\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eChoosing Between the Models\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003eAn M at the end of the model name (RSM) means 230V single-phase, No M means 400V three-phase (RS).\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: choosing-between-the-models-4;\"\u003e\u003cspan lang=\"EN-US\"\u003eWithin the RS(M) range, motor power determines the head achievable. Flow stays roughly constant across the models. The 3kW RS 80 is only available in 400V three-phase.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"rs-versus-rsx-which-one\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eRS Versus RSX: Which One?\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: rs-versus-rsx-which-one;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe RS has a cast iron pump body with stainless steel casing. Cheaper, suitable for most general non-potable water applications. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: rs-versus-rsx-which-one;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe RSX has full stainless steel 304 construction. More expensive, used where food-grade or higher corrosion resistance is required.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: rs-versus-rsx-which-one;\"\u003e\u003cspan lang=\"EN-US\"\u003eWith \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/speroni-pumps\" rel=\"noopener\" target=\"_blank\"\u003eSperoni Pumps\u003c\/a\u003e, models\u003c\/span\u003e\u003c\/span\u003e with an X in the model name (RSX, CMX, CTX) have stainless construction on the wet parts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Speroni","offers":[{"title":"RSM 40","offer_id":47545348620607,"sku":"19-15-1046","price":504.17,"currency_code":"GBP","in_stock":true},{"title":"RS40","offer_id":47545348653375,"sku":"19-15-1201","price":516.67,"currency_code":"GBP","in_stock":true},{"title":"RSM 50","offer_id":47545348718911,"sku":"19-15-1052","price":545.83,"currency_code":"GBP","in_stock":true},{"title":"RS 50","offer_id":47545348784447,"sku":"19-15-1281","price":566.67,"currency_code":"GBP","in_stock":true},{"title":"RSM 60","offer_id":47545348817215,"sku":"19-15-1079","price":558.33,"currency_code":"GBP","in_stock":true},{"title":"RS 60","offer_id":47545348849983,"sku":"19-15-1143","price":574.17,"currency_code":"GBP","in_stock":true},{"title":"RS 80","offer_id":47545348915519,"sku":"19-15-1074","price":583.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/speroni-rs-m-horizontal-multistage-pumps-choose-model-rs-80-8183-p.jpg?v=1704987250"},{"product_id":"speroni-ram-horizontal-centrifugal-pumps","title":"Speroni RA(M) Horizontal Self-Priming Multistage Pump","description":"\u003ch2\u003e\u003cspan lang=\"EN-US\"\u003eSelf-priming multistage pump for garden water supply and rainwater pressurisation where the source is below the pump.\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe RA and RAM are multi-staging non-self-priming, horizontal centrifuge pumps. For the pumping of only clean water, manufactured by \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/speroni-pumps\"\u003eSperoni Pumps\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAn M at the end of the model name (RAM) means 230V single-phase.\u003c\/li\u003e\n\u003cli\u003eNo M (RA) means 400V three-phase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThey develop high pressures from small motors and operate virtually silent, this makes them great for domestic use, in addition to horticultural and industrial applications. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 1.5kW and 1.9kW models feature hard-faced mechanical seals.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe Speroni RA and RAM combine two features in one pump\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"MsoBodyText\"\u003e\u003cstrong\u003e\u003cspan lang=\"EN-US\"\u003eSelf-priming capability and multistage pressure boosting. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThis makes it the natural choice for garden water supply from a tank, small sprinkler systems, and any application where the pump sits above the water source but still needs to deliver high pressure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eMost multistage pumps (the RS, RV, RSX ranges) are not self-priming. They need flooded suction. The RA(M) solves this by combining self-priming technology with a multistage impeller stack, giving you both capabilities in a single pump.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"where-this-pump-is-used-13\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eWhere the Speroni RA(M) Pump is Used\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-13;\"\u003e\u003cspan lang=\"EN-US\"\u003eGarden and allotment water supply from a tank below ground. Rainwater harvesting pressurisation (with appropriate air gap). Small sprinkler systems where the source is below pump level. Irrigation from streams, ponds, and storage tanks. Horticultural and greenhouse water supply. Light industrial transfer with pressure requirement.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-13;\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003cstrong\u003eOperating Conditions: \u003c\/strong\u003eContinuous duty | Max. ambient temp: 40°C | Max. suction lift (+ foot valve): 7 mtrs\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-13;\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003cstrong\u003eFluid:\u003c\/strong\u003e Clean water | Temperature: 0 - 35°C\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-13;\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003cstrong\u003eApplication: \u003c\/strong\u003ePressurisation units | Fire fighting | Washing | Condensate | Water supply | Cooling\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"choosing-between-the-models-3\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eChoosing Between the Models\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cstrong\u003e\u003cspan style=\"mso-bookmark: choosing-between-the-models-3;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe smaller models (RAM 3, 4, 5) are garden-scale: lower flow, good for small gardens and rainwater systems. \u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cstrong\u003e\u003cspan style=\"mso-bookmark: choosing-between-the-models-3;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe larger models (RAM 40, 50) step up to irrigation and small commercial use.\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"ram-versus-cam-jet\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eRA(M) Versus CA(M) Jet\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: ram-versus-cam-jet;\"\u003e\u003cspan lang=\"EN-US\"\u003eBoth are self-priming. The CA(M) jet pump uses a single impeller plus a jet venturi (simple, reliable, moderate head). The RA(M) multistage uses several impellers in series (more complex, higher head, quieter). For jobs that need modest pressure from a simple pump, the CA(M) is often the right answer and costs less. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: ram-versus-cam-jet;\"\u003e\u003cspan lang=\"EN-US\"\u003eFor jobs that need real pressure with continuous running and quiet operation, the RA(M) is the better choice.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan lang=\"EN-US\"\u003eImportant: WRAS Approval\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan lang=\"EN-US\"\u003eThis pump is not WRAS approved and is not for drinking water supply. It is suitable for irrigation, sprinklers, fire systems, rainwater harvesting, cooling loops, and industrial or agricultural water.\u003c\/span\u003e\u003c\/p\u003e","brand":"Speroni","offers":[{"title":"RAM 3","offer_id":47545401671999,"sku":"19-15-1198","price":250.0,"currency_code":"GBP","in_stock":true},{"title":"RAM 4","offer_id":47545401704767,"sku":"19-15-1009","price":274.17,"currency_code":"GBP","in_stock":true},{"title":"RAM 5","offer_id":47545401737535,"sku":"19-15-1120","price":295.83,"currency_code":"GBP","in_stock":true},{"title":"RA 5","offer_id":47545401770303,"sku":"19-15-1160","price":307.5,"currency_code":"GBP","in_stock":true},{"title":"RAM 40","offer_id":47545401803071,"sku":"19-15-1106","price":524.17,"currency_code":"GBP","in_stock":true},{"title":"RA 40","offer_id":47545401835839,"sku":"19-15-1167","price":529.17,"currency_code":"GBP","in_stock":true},{"title":"RAM 50","offer_id":47545401868607,"sku":"19-15-1137","price":562.5,"currency_code":"GBP","in_stock":true},{"title":"RA 50","offer_id":47545401901375,"sku":"19-15-1173","price":616.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/speroni-ra-m-horizontal-centrifugal-pumps-choose-model-ra-50-8195-p.jpg?v=1704987657"},{"product_id":"speroni-rsxm2-horizontal-multistage-pumps","title":"RSX(M)2 2-Stage Multistage Pump | Pressure Boosting","description":"\u003cp class=\"FirstParagraph\"\u003e\u003cstrong\u003e\u003cspan lang=\"EN-US\"\u003eCompact stainless steel multistage pump for smaller sprinkler systems and light potable boosting.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe RSX2 and RSXM2 are the smallest stainless steel multistage pump in the RSX range, manufactured by \u003ca rel=\"noopener\" href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/surface-pumps\" target=\"_blank\"\u003eSperoni Pumps\u003c\/a\u003e. They are built for light potable boosting applications where flow requirements are modest but pressure needs can be significant.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eMultistage pumps stack multiple impellers in series: each one adds pressure without adding flow, which is how small motors produce high head.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThree stage-count options let you pick the exact head you need: 4, 5, or 6 stages. All three use the same modest motor platform, so running cost and installation footprint are consistent across the range.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eFull stainless steel 304 construction makes this pump suitable for clean potable applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003ca name=\"where-this-pump-is-used-12\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eWhere the Speroni RSX2 and RSXM2 are Used\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-12;\"\u003e\u003cspan lang=\"EN-US\"\u003eSmall sprinkler systems. Rainwater harvesting pressurisation. Clean water washing systems. Cooling loops on small processing lines. Stored water booster (downstream of air gap). Light commercial potable pressurisation.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSuitable for potable water from a tank or private supply (not for direct mains, not WRAS approved).\u003c\/p\u003e\n\u003cp\u003eApplication: Pressurisation units | Sprinklers | Washing | Irrigation | Water supply | Cooling\u003c\/p\u003e\n\u003ch3 class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-12;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe Difference between the RSX2 and RSXM2\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAn M at the end of the model name means 230V single-phase (RSXM)\u003c\/li\u003e\n\u003cli\u003eNo M means 400V three-phase (RSX).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003ca name=\"choosing-between-the-stage-counts-1\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eChoosing Between the Stage Counts\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan lang=\"EN-US\"\u003eMore stages means more pressure. Flow rate is consistent across the three options. Pick based on the head you need.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe number at the end of the product code (−4, −5, −6) is the number of impellers in the pump. More impellers means more stages, and more stages means more pressure.\u003c\/p\u003e\n\u003ch4\u003e\u003cspan lang=\"EN-US\"\u003eImportant: WRAS Approval\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan lang=\"EN-US\"\u003eThis pump is not WRAS approved and is not for drinking water supply. It is suitable for irrigation, sprinklers, fire systems, rainwater harvesting, cooling loops, and industrial or agricultural water.\u003c\/span\u003e\u003c\/p\u003e","brand":"Speroni","offers":[{"title":"RSXM2-4 (230V)","offer_id":47545453805887,"sku":"19-15-1205","price":354.17,"currency_code":"GBP","in_stock":true},{"title":"RSX2-4 (400V)","offer_id":47545453838655,"sku":"19-15-1023","price":362.5,"currency_code":"GBP","in_stock":true},{"title":"RSXM2-5 (230V)","offer_id":47545453871423,"sku":"19-15-1133","price":387.5,"currency_code":"GBP","in_stock":true},{"title":"RSX2-5 (400V)","offer_id":47545453904191,"sku":"19-15-1100","price":390.83,"currency_code":"GBP","in_stock":true},{"title":"RSXM2-6 (230V)","offer_id":47545453936959,"sku":"19-15-1040","price":391.67,"currency_code":"GBP","in_stock":true},{"title":"RSX2-6 (400V)","offer_id":47545453969727,"sku":"19-15-1220","price":390.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/speroni-rsx-m-2-horizontal-multistage-pumps-choose-model-rsx2-6-8202-p.jpg?v=1704988172"},{"product_id":"speroni-rsxm4-horizontal-multistage-pumps","title":"Speroni RSX(M)4 4-Stage Multistage Pump | High-Head Booster","description":"\u003cp class=\"FirstParagraph\"\u003e\u003cstrong\u003e\u003cspan lang=\"EN-US\"\u003eMid-size stainless steel horizontal multistage pump for sprinklers, irrigation, and non-potable pressurisation.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe RSX(M)4 is a horizontal multistage booster pump with a full stainless steel 304 wet end. It is one of \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/speroni-pumps\" rel=\"noopener\" target=\"_blank\"\u003eSperoni Pumps\u003c\/a\u003e’ mid-size multistage pumps, sitting between the compact RSX2 and the higher-flow RSX10.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003eMultistage pumps stack multiple impellers in series. Each stage adds pressure without adding flow, which is why a small motor can produce very high head: useful for boosting, sprinklers, and tall buildings.\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe RSX(M)4 range offers 3, 4, 5, and 6 stage versions, which lets you pick the exact head you need without over-specifying the motor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe stainless construction makes this pump suitable for clean potable water applications, including rainwater harvesting systems and food-adjacent washing lines. The smooth flow path inside the pump means it runs virtually silent, which is why multistage pumps are the default choice for pressurisation sets in occupied buildings.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003ca name=\"where-this-pump-is-used-8\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eWhere the Speroni RSX4 and RSXM4 are Used\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-8;\"\u003e\u003cspan lang=\"EN-US\"\u003eSprinkler and irrigation systems. Washing and food processing lines (including potable). Stored-water systems in multi-storey buildings. Cooling system circulation. Fire-fighting boost (with appropriate controls). Horticultural and greenhouse pressurisation.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSuitable for potable water from a tank or private supply (not for direct mains, not WRAS approved).\u003c\/p\u003e\n\u003cp\u003eApplication: Pressurisation units | Sprinklers | Washing | Irrigation | Water supply | Cooling\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"choosing-between-the-stage-counts\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eChoosing Between the Stage Counts\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: choosing-between-the-stage-counts;\"\u003e\u003cspan lang=\"EN-US\"\u003eMore stages means more pressure, flow rate stays roughly the same across the range.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"FirstParagraph\"\u003ePick based on the head you need: 3 stages for moderate pressure, 6 stages for high pressure.\u003c\/li\u003e\n\u003cli class=\"FirstParagraph\"\u003eModels with M in the name are 230V single-phase; without M are 400V three-phase. Choose three-phase if your site has it available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003ca name=\"not-self-priming-1\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eNot Self-Priming\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: not-self-priming-1;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe RSX(M)4 is not self-priming. It needs flooded suction: the water source must be above or level with the pump inlet, or the suction line must be primed with a foot valve.\u003c\/span\u003e\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Speroni","offers":[{"title":"RSXM4-3 (230V)","offer_id":47545477595455,"sku":"19-15-1272","price":345.83,"currency_code":"GBP","in_stock":true},{"title":"RSX4-3 (400V)","offer_id":47545477628223,"sku":"19-15-1184","price":349.17,"currency_code":"GBP","in_stock":true},{"title":"RSXM4-4 (230V)","offer_id":47545477660991,"sku":"19-15-1294","price":358.33,"currency_code":"GBP","in_stock":true},{"title":"RSX4-4 (400V)","offer_id":47545477693759,"sku":"19-15-1208","price":350.0,"currency_code":"GBP","in_stock":true},{"title":"RSXM4-5 (230V)","offer_id":47545477726527,"sku":"19-15-1169","price":432.5,"currency_code":"GBP","in_stock":true},{"title":"RSX4-5 (400V)","offer_id":47545477759295,"sku":"19-15-1210","price":420.83,"currency_code":"GBP","in_stock":true},{"title":"RSXM4-6 (230V)","offer_id":47545477792063,"sku":"19-15-1086","price":458.33,"currency_code":"GBP","in_stock":true},{"title":"RSX4-6 (400V)","offer_id":47545477824831,"sku":"19-15-1150","price":445.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/speroni-rsx-m-4-horizontal-multistage-pumps-choose-model-rsx4-6-8224-p.jpg?v=1704988983"},{"product_id":"speroni-rsxm10-horizontal-multistage-pumps","title":"RSX(M)10 10-Stage Multistage Pump | Maximum Flow","description":"\u003cp class=\"FirstParagraph\"\u003e\u003cstrong\u003e\u003cspan lang=\"EN-US\"\u003eHigh-flow stainless steel multistage pump for commercial sprinklers, large irrigation, and industrial cooling.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe RSXM10 and RSX10 are the high-flow members of the stainless steel RSX multistage family, manufactured by \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/speroni-pumps\" rel=\"noopener\" target=\"_blank\"\u003eSperoni Pumps\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cstrong\u003e\u003cspan lang=\"EN-US\"\u003eWhere the RSX2 and RSX4 are sized for smaller systems, the RSX10 is built for larger ones: big sprinkler networks, industrial pressurisation, high-demand washing lines, and commercial irrigation.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eIt keeps the full stainless steel 304 construction of the smaller RSX pumps, which means it is suitable for clean potable water and food-adjacent applications. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe difference is bigger internals: wider flow paths and larger impellers producing more litres per minute.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003eMultistage pumps stack multiple impellers in series. Each stage adds pressure without adding flow, which is why a small motor can produce very high head: useful for boosting, sprinklers, and tall buildings.\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe RSX(M)4 range offers  4, 5, and 6 stage versions, which lets you pick the head you need without over-specifying the motor.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003ca name=\"where-this-pump-is-used-11\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eWhere the RSX10 and RSXM10 Pumps are Used\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-11;\"\u003e\u003cspan lang=\"EN-US\"\u003eCommercial and agricultural sprinkler systems. Large irrigation pressurisation. Industrial washing and process water. Cooling system circulation at higher flow rates. Stored water systems in hotels and commercial buildings (downstream of air gap). Clean water transfer with boosting requirement. T\u003cspan\u003ehey develop high pressures from comparatively small motors and operate virtually silent, this makes them fantastic for domestic, horticultural, industrial, and processing applications.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSuitable for potable water from a tank or private supply (not for direct mains, not WRAS approved).\u003c\/p\u003e\n\u003cp\u003eApplication: Pressurisation units | Sprinklers | Washing | Irrigation | Water supply | Cooling\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"choosing-between-rsx2-rsx4-and-rsx10\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eChoosing Between RSX(M)2, RSX(M)4, and RSX(M)10\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAn M at the end of the model name (CM, RSM, RVM, CAM) means 230V single-phase.\u003c\/li\u003e\n\u003cli\u003eNo M means 400V three-phase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: choosing-between-rsx2-rsx4-and-rsx10;\"\u003e\u003cspan lang=\"EN-US\"\u003eAll three are stainless steel horizontal multistage pumps with the same construction. The difference is flow rate. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: choosing-between-rsx2-rsx4-and-rsx10;\"\u003e\u003cspan lang=\"EN-US\"\u003eRSX2 suits smaller sprinkler systems and light potable boosting. RSX4 suits light commercial and small irrigation. RSX10 suits commercial, agricultural and industrial use with higher flow demand. If you are unsure, tell us the flow rate you need and the head you need to develop.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan style=\"mso-bookmark: choosing-between-rsx2-rsx4-and-rsx10;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe 3kW 6-stage version of the RSX10 is only available in 400V three-phase.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e \u003c\/p\u003e","brand":"Speroni","offers":[{"title":"RSXM10-4 (230V)","offer_id":47545610862911,"sku":"19-15-1248","price":691.76,"currency_code":"GBP","in_stock":true},{"title":"RSX10-4 (400V)","offer_id":47545610895679,"sku":"19-15-1259","price":712.5,"currency_code":"GBP","in_stock":true},{"title":"RSXM10-5 (230V)","offer_id":47545610928447,"sku":"19-15-1237","price":800.0,"currency_code":"GBP","in_stock":true},{"title":"RSX10-5 (400V)","offer_id":47545610961215,"sku":"19-15-1083","price":715.83,"currency_code":"GBP","in_stock":true},{"title":"RSX10-6 (400V)","offer_id":47545610993983,"sku":"19-15-1170","price":812.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/speroni-rsx-m-10-horizontal-multistage-pumps-choose-model-rsx10-6-8241-p.jpg?v=1704990323"},{"product_id":"speroni-rvm-vertical-multi-stage-pump","title":"Speroni RV(M) Vertical Multi-Stage Pump","description":"\u003ch2 class=\"FirstParagraph\"\u003e\n\u003cspan lang=\"EN-US\"\u003eVertical multistage pump, same performance as the \u003ca rel=\"noopener\" href=\"https:\/\/floodandwaterpumps.co.uk\/products\/speroni-rsm-horizontal-multistage-pumps\" target=\"_blank\"\u003eSperoni RS(M)\u003c\/a\u003e but with a smaller footprint for tight plant rooms.\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe RV(M) by \u003ca rel=\"noopener\" href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/speroni-pumps\" target=\"_blank\"\u003eSperoni Pumps\u003c\/a\u003e is a vertical multistage booster pump. It does the same job as the horizontal RS(M) range (high pressure from a quiet, continuous-duty design), but stacked vertically instead of laid out horizontally. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThis matters when floor space is tight: pressurisation plant rooms, commercial building risers, and packaged booster sets all benefit from a smaller footprint.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe RV(M) are non-self priming, multi-staging, horizontal centrifuge pumps. For the pumping of only clean water.  \u003c\/span\u003eMultistage pumps build pressure by stacking impellers in series. The RV(M) range goes up to eight stages. \u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"where-this-pump-is-used-10\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eWhere the Speroni RV and RVM are Used\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-10;\"\u003e\u003cspan lang=\"EN-US\"\u003eSprinkler system pressurisation. Fire-fighting booster systems. Industrial and commercial cooling loop circulation, plus\u003cspan\u003e horticultural and industrial applications.\u003c\/span\u003e Condensate and process water circulation. Multi-storey stored-water systems (not direct mains). Washing and processing lines where floor space is limited. Packaged booster set assemblies for potable water. Virtually silent operation makes these suitable for installations in or near occupied spaces.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-10;\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e Pressurisation units | Fire fighting | Washing | Condensate | Water supply | Cooling\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-10;\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003cstrong\u003eOperating Conditions:\u003c\/strong\u003e Continuous duty | Max. ambient temp: 40°C | Max. suction lift (+ foot valve): 7 mtrs\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-10;\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003cstrong\u003eFluid:\u003c\/strong\u003e Clean water | Temperature: 0 - 35°C\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"horizontal-or-vertical\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eHorizontal or Vertical?\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: horizontal-or-vertical;\"\u003e\u003cspan lang=\"EN-US\"\u003eChoose the RV(M) over the horizontal RS(M) when floor space is the constraint. The RV(M) takes a smaller footprint but stands taller. Performance is broadly equivalent at the same power rating. The 3kW version is only available in 400V three-phase.\u003c\/span\u003e\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Speroni","offers":[{"title":"RVM 40","offer_id":47545657884991,"sku":"19-15-1127","price":550.0,"currency_code":"GBP","in_stock":true},{"title":"RV 40","offer_id":47545657917759,"sku":"19-15-1132","price":566.67,"currency_code":"GBP","in_stock":true},{"title":"RVM 50","offer_id":47545657950527,"sku":"19-15-1243","price":591.67,"currency_code":"GBP","in_stock":true},{"title":"RV 50","offer_id":47545658016063,"sku":"19-15-1064","price":620.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/speroni-rv-x28-m-x29-vertical-multi-stage-pump-choose-model-rv-60-8254-p.jpg?v=1704990675"},{"product_id":"speroni-swimm-swimming-pool-pump","title":"Speroni SWIMM Pool Pump | Domestic \u0026 Commercial Pools","description":"\u003ch2 class=\"MsoNormal\"\u003eVersatile Pool Pump for Domestic, Commercial \u0026amp; Water Feature Applications\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Speroni SWIMM range is a \u003cb\u003equiet, continuous-duty swimming pool pump\u003c\/b\u003e designed for a wide range of applications, including:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l8 level1 lfo9; tab-stops: list 36.0pt;\"\u003eDomestic and residential pools\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l8 level1 lfo9; tab-stops: list 36.0pt;\"\u003eCommercial and public swimming pools\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l8 level1 lfo9; tab-stops: list 36.0pt;\"\u003eWater features and ponds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eThis makes it a strong all-round option where flexibility, reliability and consistent performance are required.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUnlike many standard pool pumps, the SWIMM range is built to handle not just clean water, but also \u003cb\u003ewater containing small suspended debris\u003c\/b\u003e, making it a more versatile option for real-world pool and water feature systems.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAll models come with a \u003cb\u003e2-year manufacturer’s warranty\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\"\u003eWhere the SWIMM Range Works Best\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe SWIMM range is ideal for:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt;\"\u003ePrivate swimming pools\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt;\"\u003ePublic and commercial pools\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt;\"\u003eWater features and ponds\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l2 level1 lfo1; tab-stops: list 36.0pt;\"\u003eCirculation systems with light debris\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003eInstallations requiring continuous 24-hour running\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eThis is a strong all-rounder where reliability and flexibility matter.\u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\"\u003eWhy Choose the Speroni SWIMM Pump?\u003c\/h2\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo2; tab-stops: list 36.0pt;\"\u003eDesigned for continuous duty (24\/7 operation)\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo2; tab-stops: list 36.0pt;\"\u003eQuiet running swimming pool pump\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo2; tab-stops: list 36.0pt;\"\u003eAlso suitable for ponds and water features\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo2; tab-stops: list 36.0pt;\"\u003eHandles clean water and light debris\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo2; tab-stops: list 36.0pt;\"\u003eSelf-priming with up to 7m suction lift\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo2; tab-stops: list 36.0pt;\"\u003eSuitable for both domestic and commercial use\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo2; tab-stops: list 36.0pt;\"\u003eEasy to maintain and service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"MsoNormal\"\u003eBuild and Design\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe pump body is engineered from tough thermoplastic and manufactured with a stainless steel shaft. Abrasion resistance is enhanced further by the inclusion of an anti-wear impeller which is suited to withstand sands and silts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe SWIMM range is designed for durability and long-term use:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo3; tab-stops: list 36.0pt;\"\u003eThermoplastic pump body and impeller\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo3; tab-stops: list 36.0pt;\"\u003eStainless steel motor shaft\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo3; tab-stops: list 36.0pt;\"\u003eNBR mechanical seal\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo3; tab-stops: list 36.0pt;\"\u003eIP55 rated motor (dust and water protected)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eThe design includes:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l0 level1 lfo4; tab-stops: list 36.0pt;\"\u003e\n\u003cb\u003eRemovable filter basket\u003c\/b\u003e for debris capture\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l0 level1 lfo4; tab-stops: list 36.0pt;\"\u003e\n\u003cb\u003eClear inspection lid\u003c\/b\u003e for quick checks\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l0 level1 lfo4; tab-stops: list 36.0pt;\"\u003e\n\u003cb\u003eUnion connections\u003c\/b\u003e, allowing the pump to be removed without disturbing pipework\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eThis makes maintenance far easier compared with fixed pipe installations.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003ePerformance and Models\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eFour main models are available in this range (230V):\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eSWIMM 500\u003c\/strong\u003e – 250 L\/min (0.37kW) – \u003cem\u003esmall pools \/ low demand\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSWIMM 750\u003c\/strong\u003e – 275 L\/min (0.55kW) – \u003cem\u003etypical domestic pools\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSWIMM 1000\u003c\/strong\u003e – 350 L\/min (0.75kW) – \u003cem\u003elarger systems\u003c\/em\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSWIMM 1500\u003c\/strong\u003e – 450 L\/min (1.10kW) – \u003cem\u003ehigh demand \/ commercial\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSWIMM 2000\u003c\/strong\u003e – 450 L\/min (1.5kW) - \u003cem\u003ehighest flow on single phase\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSWIMM 3000T IE3\u003c\/strong\u003e – 450 L\/min (2.2kW) - \u003cem\u003e400V three-phase\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSWIMM 4000T IE3\u003c\/strong\u003e – 450 L\/min (2.4kW) - \u003cem\u003e400V three-phase\u003c\/em\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eIE3 is an international energy efficiency standard for premium-efficiency electric motors.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eFlow rates and performance will vary depending on pipework, system layout and head conditions.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eInstallation and Compatibility\u003c\/h3\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo6; tab-stops: list 36.0pt;\"\u003e\n\u003cb\u003e1.5” pipework (48.3mm)\u003c\/b\u003e – SWIMM 500 \/ 750 \/ 1000\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo6; tab-stops: list 36.0pt;\"\u003e\n\u003cb\u003e2” pipework (60.3mm)\u003c\/b\u003e – SWIMM 1500 \/2000\/ 3000T \/ 4000T \u003cem\u003e(Includes reducers for 1½” pipework)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eSupplied with swivel unions to enable the pump to be removed for maintenance without disturbing the pipe system. The pipe connections are designed to be fitted to rigid plastic\u003cbr\u003epipe with an outside diameter of 48.3mm or 60.3mm. In addition, they also have female BSP connections to enable a male BSP hose tail to be fitted and a flexible hose attached.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eModels from \u003cstrong\u003eSWIMM 500 to SWIMM 1500\u003c\/strong\u003e can be fitted with \u003cstrong\u003e1½″ (40 mm) BSP male hose tails\u003c\/strong\u003e, allowing connection to flexible suction\/delivery hose for applications such as water features.\u003c\/p\u003e\n\u003cp\u003eModels from \u003cstrong\u003eSWIMM 2000 and above\u003c\/strong\u003e can be fitted with \u003cstrong\u003e2″ (50 mm) BSP male hose tails\u003c\/strong\u003e where flexible hose is preferred.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eOperating Conditions\u003c\/h3\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo7; tab-stops: list 36.0pt;\"\u003eSuitable for liquids between \u003cb\u003e+5°C and +35°C\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo7; tab-stops: list 36.0pt;\"\u003eDesigned for:\u003c\/li\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"circle\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level2 lfo7; tab-stops: list 72.0pt;\"\u003eClean water\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level2 lfo7; tab-stops: list 72.0pt;\"\u003eWater with floating debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo7; tab-stops: list 36.0pt;\"\u003eMaximum ambient temperature: \u003cb\u003e40°C\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan role=\"text\"\u003eDesigned for Typical Pool Installations\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SWIMM range can be installed below, at, or slightly above water level, making it suitable for most standard pool systems.\u003c\/p\u003e\n\u003cp\u003eFor optimum performance, installation at or below water level (flooded suction) is recommended. This provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMore efficient, continuous operation\u003c\/li\u003e\n\u003cli\u003eReduced strain on the pump\u003c\/li\u003e\n\u003cli\u003eGreater long-term reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor installations requiring higher self-priming capability, consider the \u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/swimming-pool-pumps\/products\/plastica-ag-series-pool-pump\" target=\"_blank\"\u003ePlastica AG Series\u003c\/a\u003e or \u003ca rel=\"noopener\" href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/swimming-pool-pumps\/products\/plastica-argonaut-av-series-pool-pump\" target=\"_blank\"\u003ePlastica Argonaut\u003c\/a\u003e range\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0cm;\"\u003e \u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhat’s in the Box?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"font-family: 'Segoe UI Emoji',sans-serif; mso-bidi-font-family: 'Segoe UI Emoji';\"\u003e✅\u003c\/span\u003e Speroni SWIMM Swimming Pool Pump\u003cbr\u003e\u003cspan style=\"font-family: 'Segoe UI Emoji',sans-serif; mso-bidi-font-family: 'Segoe UI Emoji';\"\u003e✅\u003c\/span\u003e Pipe unions for ABS pipe\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhy Buy From Us?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eWe’re an engineering-led supplier.\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l7 level1 lfo8; tab-stops: list 36.0pt;\"\u003eSupplying pumps across the UK for over a decade\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l7 level1 lfo8; tab-stops: list 36.0pt;\"\u003eTrusted by homeowners, contractors and commercial clients\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l7 level1 lfo8; tab-stops: list 36.0pt;\"\u003eTechnical support from an experienced engineering team\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l7 level1 lfo8; tab-stops: list 36.0pt;\"\u003eTop-rated supplier with a focus on getting the right pump, not just any pump\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"Speroni","offers":[{"title":"Swimm 500","offer_id":47545740886335,"sku":"19-15-1063","price":204.17,"currency_code":"GBP","in_stock":true},{"title":"Swimm 750","offer_id":47545740919103,"sku":"19-15-1140","price":245.83,"currency_code":"GBP","in_stock":true},{"title":"Swimm 1000","offer_id":47545740951871,"sku":"19-15-1283","price":265.83,"currency_code":"GBP","in_stock":true},{"title":"Swimm 1500","offer_id":47545740984639,"sku":"19-15-1211","price":270.83,"currency_code":"GBP","in_stock":true},{"title":"Swimm 2000","offer_id":56204004786555,"sku":"19-15-1299","price":390.83,"currency_code":"GBP","in_stock":true},{"title":"Swimm 3000T IE3","offer_id":56204010553723,"sku":"19-15-1442","price":415.83,"currency_code":"GBP","in_stock":true},{"title":"Swimm 4000T IE3","offer_id":56204021563771,"sku":"19-15-1515","price":490.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/SWIMM_Swimming_Pool_Pump.jpg?v=1773325076"},{"product_id":"honda-wx-wb-petrol-site-water-pumps","title":"Honda WB20 Petrol Water Pump | 2 Inch, 620 L\/min Site \u0026 Flood Pump","description":"\u003ch2\u003eHonda WB20 Petrol Water Pump | 2 Inch, 620 L\/min Site and Flood Pump\u003c\/h2\u003e\n\u003cp\u003eThe Honda WB20 is the industry-standard 2 inch petrol water pump, designed for users who need high-volume water transfer and absolute reliability. Powered by the commercial-grade Honda GX120 4-stroke engine, this centrifugal pump is engineered to handle demanding tasks on construction sites, farms and during emergency flood relief.\u003c\/p\u003e\n\u003cp\u003eSelf-priming, centrifugal pumps manufactured by Honda and fitted with 4-stroke, recoil start enginess.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIt strikes the balance between high-flow performance and portable ease of use, weighing only 21kg, and moves up to 620 litres of water every minute so even large dewatering jobs are completed quickly.\u003c\/p\u003e\n\u003ch3\u003eKey features and benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLegendary Honda GX120 engine: the 4-stroke OHV engine is renowned for easy starting, fuel efficiency and long-term durability in harsh conditions\u003c\/li\u003e\n\u003cli\u003eCast iron volute and impeller: heavy-duty internals give superior resistance to abrasive silt and sand, unlike cheaper alternatives\u003c\/li\u003e\n\u003cli\u003eSilicon carbide mechanical seals: high-grade seals ensure leak-free operation and extend pump life\u003c\/li\u003e\n\u003cli\u003eOil Alert system: automatically shuts down the engine if the oil level falls below a safe limit, protecting your investment\u003c\/li\u003e\n\u003cli\u003eAnti-vibration mounts: pump and engine sit on rubber dampers within a protective steel frame to reduce stress and noise\u003c\/li\u003e\n\u003cli\u003eSmall solids handling: a robust suction strainer passes small suspended solids while protecting the pump from larger debris\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal applications\u003c\/h3\u003e\n\u003cp\u003eThe WB20 is a versatile workhorse across professional sectors. In construction it is the primary choice for draining trenches, footings and manholes. In agriculture it is ideal for filling water bowsers and managing irrigation. It is also essential for emergency services and utility companies handling rapid flood clearance and mains burst management. Its compact dimensions make it easy to transport in a small van or utility vehicle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSite drainage and dewatering\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConstruction and civil engineering projects\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUtility and infrastructure maintenance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIrrigation and agricultural water transfer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWash down applications\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHire fleet and contractor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuy it as a kit\u003c\/h3\u003e\n\u003cdiv style=\"margin: 28px 0; padding: 20px 24px; background: #F0EDE5; border-left: 4px solid #283583; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong\u003eThe 2 inch pump everyone already owns, supplied with the hoses that make it work.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eThe \u003ca href=\"{WB20_KIT_URL}\"\u003eFlood \u0026amp; Site Pump Kit\u003c\/a\u003e pairs the WB20 with \u003cstrong\u003e6m of 50mm reinforced suction hose\u003c\/strong\u003e and \u003cstrong\u003e30m of 50mm layflat\u003c\/strong\u003e for the discharge. Reinforced on the suction because layflat collapses under vacuum and the pump loses prime; layflat on the delivery because pressure holds it open. Around \u003cstrong\u003e474 litres a minute through the kit\u003c\/strong\u003e at a 2m lift. \u003ca href=\"{WB20_KIT_URL}\"\u003e\u003cstrong\u003eView the kit ›\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum discharge: 620 L\/min\u003c\/li\u003e\n\u003cli\u003eMaximum total head: 32m\u003c\/li\u003e\n\u003cli\u003eMaximum suction head: 7.5m \u003c\/li\u003e\n\u003cli\u003ePorts: 2 inch (50mm) suction and discharge\u003c\/li\u003e\n\u003cli\u003eEngine: Honda GX120, 122cc, 2.4kW\u003c\/li\u003e\n\u003cli\u003eDry weight: 21kg\u003c\/li\u003e\n\u003cli\u003eInlet\/Outlet: 50mm\u003c\/li\u003e\n\u003cli\u003eEngine Power: 4 HP\u003c\/li\u003e\n\u003cli\u003eMaximum Solid Size: 6mm\u003c\/li\u003e\n\u003cli\u003eFuel Tank \/ Runtime: 2 litres \/ approx. 1 hour 42 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe WB20 will pump up to 79,000 litres on a single tank-full of fuel. The pump is housed within a frame to provide a stable surface to operate from and to make transportation easier. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich Honda pump do you need?\u003c\/h3\u003e\n\u003cp\u003eThe WB20 is the general-purpose 2 inch standard, and the one to choose when you need more lift. For lightweight transfer around the home, see the 1 inch \u003ca href=\"\/products\/honda-wx10-petrol-site-water-pumps\"\u003eHonda WX10\u003c\/a\u003e. For maximum volume on large dewatering and flood jobs, see the 3 inch \u003ca href=\"\/products\/honda-wb30-petrol-site-water-pumps\"\u003eHonda WB30\u003c\/a\u003e. See the full comparison below.\u003c\/p\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"paragraph-in-scc-markdown-text ___1ngh792 ftgm304 f1iaxwol\"\u003e\n\u003cdiv class=\"paragraph-in-scc-markdown-text ___1ngh792 ftgm304 f1iaxwol\"\u003e\n\u003cdiv class=\"paragraph-in-scc-markdown-text ___1ngh792 ftgm304 f1iaxwol\" style=\"text-align: start;\"\u003e\n\u003ch3\u003eWhy choose the Honda WX \u0026amp; WB petrol pumps?\u003c\/h3\u003e\n\u003cp\u003eHonda WX and WB pumps are trusted for their build quality, ease of use and dependable performance. With a range of sizes and flow rates available, they offer a reliable solution for both light‑duty and higher‑capacity pumping tasks, making them ideal for contractors, utilities and hire companies that need proven petrol‑powered water pumps.\u003c\/p\u003e\n\u003ch3\u003eOperational Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowered by Honda 4‑stroke petrol engines\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSelf‑priming centrifugal pump design\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLightweight and highly portable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCeramic mechanical seals for increased reliability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuitable for clean and lightly silty water\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAvailable in three models to suit different flow and discharge requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHonda WX10 vs WB20 vs WB30\u003c\/h3\u003e\n\u003cp\u003eAll three are Honda 4-stroke petrol water pumps. The right one depends on how much water you need to move and how far you need to lift it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/honda-wx10-petrol-site-water-pumps\"\u003eHonda WX10\u003c\/a\u003e\u003c\/strong\u003e: 1 inch, up to 120 L\/min, 37m head, 6.1kg. Lightweight transfer around the home, garden and boat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/honda-wx-wb-petrol-site-water-pumps\"\u003eHonda WB20\u003c\/a\u003e\u003c\/strong\u003e: 2 inch, up to 620 L\/min, 32m head, 21kg. The general-purpose site, farm and flood standard, and the choice when you need more lift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/honda-wb30-petrol-site-water-pumps\"\u003eHonda WB30\u003c\/a\u003e\u003c\/strong\u003e: 3 inch, up to 1,100 L\/min, 23m head, 26kg. The high-volume choice for large dewatering and flood, when you need maximum flow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e1 × Honda WX or WB petrol water pump\u003cbr\u003e1 × Set of hose couplings\u003cbr\u003eWashers, clips and strainer\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePlease note:\u003c\/em\u003e\u003c\/strong\u003e hoses are not included and must be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Honda_GX_Warranty_Flood_Water_Pumps_a0a5b0fc-de10-41c7-95f4-f0101c511f09_160x160.jpg?v=1782711060\" alt=\"Honda GX Warranty Logo\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":47622211862847,"sku":"13-20-1001","price":378.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Honda_WB20_3.jpg?v=1782711998"},{"product_id":"sediment-filter-pollutant-capture","title":"Sediment Filter - Pollutant Capture","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEconomy Sediment Filter\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLow-cost but effective filter for low-volume and low-risk applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSmall and lightweight for easy storage \u0026amp; quick mobilisation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFilter holds 20kg of sediment for single person handling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWater discharged to Environment Agency accepted levels (100µm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned for single use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEasy to attach, use and empty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThere are no excuses for pumping dirty water onto the road or pavement and risking a costly fine. Our entry-level filter will fit all budgets and cleans water to Environment Agency accepted levels (100µm). The filter media is made from a non-woven geotextile.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLightweight and easy to use it is suitable even for one-man jobs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Budget Filter is designed for capturing 20kg sediment before being replaced. This may equate to a single job or a small number of low usage jobs. When it becomes harder, or impossible, to pump water through, the filter is clogged\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eSediment Filter\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStay compliant and on schedule with this rugged and reusable dewatering filter\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStay compliant and on schedule with this rugged and reusable dewatering filter.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSave £000s – no vacuum tankering required\u003cbr data-mce-fragment=\"1\"\u003eFilter holds 20kg of sediment for single person handling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSimply empty and reuse up to 20 times\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWater discharged to Environment Agency accepted levels (150µm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eIntegral hydrocarbon detector alerts you to oil-based contaminants\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEasy to attach, use and empty\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLifting straps for safe and easy handling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHighly visible colour to avoid trips\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis filter will help you resolve dewatering challenges, avoiding the expensive clean-up costs of vacuum tankers and jetting vehicles, or fines from environmental regulators.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eConstructed from a layered system of nylon monofilament for capturing sediment particles down to 150µm, and a PVC nylon outer sleeve tested for tensile strength and durability, this rugged filter is built to handle repeated use in harsh conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis filter can be reused up to 20 times depending on the geology of the sediment being filtered. That’s 400kg sediment captured with a single filter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUse a Green Rhino Manifold to harness four, six or eight filters to process large volumes of water without the delays or costs associated with vacuum tankers or sediment tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe filter is made from high quality materials sourced from responsible suppliers, all being non-hazardous and not classified.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOil \u0026amp; Sediment Dewatering Filter\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe fast, effective way to dewater excavations contaminated with oil and\/or sediment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSave £000s – no vacuum tankering required\u003cbr data-mce-fragment=\"1\"\u003eRetains 2.5L of oil sheen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFilters 20kg of sediment for single person handling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSimply empty and reuse up to 20 times or until integral hydrocarbon detector turns dark blue\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWater discharged to Environment Agency accepted levels (150µm)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHighly visible colour to avoid trips\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis versatile filter cleans oil and sediment from contaminated water, avoiding the expensive clean-up costs of vacuum tankers and jetting vehicles, or fines from environmental regulators.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur Oil \u0026amp; Sediment Filter is constructed from a multi-layered filter system of nylon monofilament for capturing sediment particles, and layers of polypropylene non-woven material for oil absorbency. With a PVC nylon outer sleeve tested for tensile strength and durability, this rugged filter is built to handle repeated use in harsh conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe filter can be reused up to 20 times (400kg), depending on the geology of the sediment being filtered, or until the integral hydrocarbon detector turns dark blue – indicating that the filter has absorbed 2.5L oil.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eUse a Green Rhino Manifold to harness four, six or eight filters to process large volumes of water without the delays or costs associated with vacuum tankers or sediment tanks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe filter is made from high quality materials sourced from responsible suppliers, all being non-hazardous and not classified.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tsurumi Pumps","offers":[{"title":"Economy Sediment Filter","offer_id":47623522255167,"sku":"","price":57.5,"currency_code":"GBP","in_stock":true},{"title":"Sediment Filter -H\/Duty","offer_id":47623522320703,"sku":"","price":115.83,"currency_code":"GBP","in_stock":true},{"title":"Oil \u0026 Sediment Dewatering Filter","offer_id":47623522353471,"sku":"","price":215.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/sediment-filter-pollutant-capture-5778-426971.png?v=1721136491"},{"product_id":"evak-residox-puddle-sucker-pump","title":"EVAK Residox 400 Manual Puddle Pump | 213 L\/min","description":"\u003ch2 class=\"MsoNormal\"\u003eEVAK Residox 400 Ultra-Low-Level | Pumps Down to 1 mm | No Priming Required | 110V \u0026amp; 230V Options\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe EVAK Residox 400 is a stainless steel ultra-low-level manual puddle pump, designed to remove standing water down to approximately 1 mm above the floor.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis variant is a manual version, giving the operator full control over when the pump runs, making it suitable for attended flood response, controlled site work and hire fleets across residential, commercial and light-construction settings.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhere the Residox 400 fits\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe 400 is the standard model in the Residox range. The maximum flow rate is 213 litres per minute and the pump has an 11-metre head, providing sufficient capacity for most domestic and commercial flood-recovery jobs, basement clearance, internal floor drainage and general nuisance water.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eFor larger areas, longer hose runs or uphill discharge, the higher-output \u003ca href=\"https:\/\/l6ojaf4oyj2czghz-84508574015.shopifypreview.com\/products\/evak-residox-750-powerful-puddle-sucker-pumps-high-flow-flood-pump?_pos=2\u0026amp;_psq=resi\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"Evak Residox 750 Puddle Pump\"\u003eResidox 750\u003c\/a\u003e is the more appropriate choice.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eUltra-low-level pumping\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Residox is designed for jobs that conventional submersible pumps are not suitable for. Where a standard pump stops drawing once the water drops below its inlet or strainer, the Residox continues pumping down to approximately 1 mm above the floor, leaving surfaces almost dry.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThat makes it well suited to flood recovery, basement clearance and any application where minimal residual water is the priority.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eBuilt for demanding use\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eCast iron pump housing, stainless steel outer case and handle, alloy motor and seal casing, and an abrasion-resistant Hytrel vortex impeller.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe 2 mm free passage handles water typical of flood conditions. A rubberised NBR suction base allows the pump to sit directly on tiles, finished concrete and other delicate surfaces without causing damage.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eNo priming needed\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eUnlike some other puddle pumps (such as the Tsurumi LSC range), the Residox does not need to be primed with water poured into the pump body. Place it down in the water to be removed, switch it on, and pump.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe pump is fully submersible and should always be operated submerged or with water present at the suction base and should not be left to run dry.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003e110V or 230V\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eChoose 110V for site use with a transformer, or 230V for domestic and general-purpose applications.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eKey Features\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e✔ Pumps down to approximately 1 mm above floor level \u003cbr\u003e✔ Manual operation, full operator control\u003cbr\u003e✔ Stainless steel outer case and handle \u003cbr\u003e✔ Cast iron pump housing and Hytrel vortex impeller \u003cbr\u003e✔ 2 mm free passage handles small debris \u003cbr\u003e✔ Rubberised NBR base, surface-safe on finished floors \u003cbr\u003e✔ No priming required \u003cbr\u003e✔ 250 l\/min flow, 11 m head \u003cbr\u003e✔ Available in 110V or 230V \u003cbr\u003e✔ 1-year manufacturer's warranty\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e✅ 1 x EVAK Residox 400 Manual Puddle Pump \u003cbr\u003e✅ 1 x 10m heavy-duty rubber power cable \u003cbr\u003e✅ 1 x 2 inch (50mm) hose tail\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eOptional: add a 90° elbow hose tail to prevent hose kinking and maintain optimum flow.\u003cbr\u003e\u003c\/p\u003e","brand":"EVAK","offers":[{"title":"Evak Residox 400 230v (3 pin Domestic Plug)","offer_id":47653206655295,"sku":"EVK-RES400-230-M","price":312.5,"currency_code":"GBP","in_stock":true},{"title":"Evak Residox 400 110v (Industrial)","offer_id":47653206688063,"sku":"EVK-RES400-110-M","price":312.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/evak-residox-puddle-sucker-pump-6494-p.jpg?v=1725887151"},{"product_id":"evak-hippo-50-sewage-pump","title":"EVAK Hippo 50 Sewage Pump | 50mm Solids, 7m Head","description":"\u003ch2\u003eDirty Water \u0026amp; Sewage Pump – 50mm Solids Handling Submersible Pump\u003c\/h2\u003e\n\u003cp\u003eThe Evak Hippo 50 Sewage Pump is a heavy-duty, submersible sewage pump engineered for robust performance in foul-water, sewage and flood-water applications. With a generous solids-handling ability (50mm), automatic variants (110V or 230V) and a manual 400V (3 phase) option, it gives you flexible power options to match site conditions.\u003c\/p\u003e\n\u003ch3\u003eConstruction and Durability\u003c\/h3\u003e\n\u003cp\u003eThe Hippo 50 is built for demanding environments, using robust materials throughout to ensure long service life in sewage and dirty-water applications. Key construction features include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCast iron pump housing for strength and durability\u003c\/li\u003e\n\u003cli\u003eStainless or alloy motor and seal casing\u003c\/li\u003e\n\u003cli\u003eRecessed vortex impeller for reliable solids handling\u003c\/li\u003e\n\u003cli\u003eDouble mechanical seals to protect the motor\u003c\/li\u003e\n\u003cli\u003eIntegrated thermal and overload protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRated for liquids up to 40°C and a maximum submersion depth of 10 metres, the Hippo 50 is well suited to typical domestic sewage temperatures and chamber depths.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose the Evak Hippo 50?\u003c\/h3\u003e\n\u003cp\u003eThe Evak Hippo 50 is designed to deliver balanced performance, powerful enough for sewage applications, without unnecessary over-specification.\u003c\/p\u003e\n\u003cp\u003eKey benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50mm solids handling, ideal for most domestic sewage systems\u003c\/li\u003e\n\u003cli\u003eReliable performance without the cost and complexity of cutter or grinder pumps\u003c\/li\u003e\n\u003cli\u003eWell suited to steady operation in typical sump installations\u003c\/li\u003e\n\u003cli\u003eExcellent value for money for domestic and light-commercial use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSewage pumps are designed to run steadily rather than switching on and off in rapid cycles, so it’s important not to over specify. Choosing a pump that operates comfortably in the middle of its performance curve gives better reliability and longevity. The Hippo 50 provides a well-balanced level of power for installations where the head height and discharge distance aren’t excessive, making it an ideal choice for typical domestic and light-commercial sewage sumps.\u003c\/p\u003e\n\u003cp\u003eThis model offers excellent value for money. You get a pump that handles the needs of most household sewage applications without jumping to more expensive commercial-grade cutter\/grinder units that many customers don’t require.\u003c\/p\u003e\n\u003cp\u003eIf greater flow capacity or head height is required, the \u003ca title=\"Evak Hippo 75\" href=\"https:\/\/floodandwaterpumps.co.uk\/products\/evak-hippo-50-sewage-pump-7m-head-lift-dn50-50-copy?_pos=4\u0026amp;_psq=hippo\u0026amp;_ss=e\u0026amp;_v=1.0\u0026amp;variant=56200631484795\"\u003e Evak Hippo 75 \u003c\/a\u003e or \u003ca title=\"Evak Hippo 100\" href=\"https:\/\/floodandwaterpumps.co.uk\/products\/evak-hippo-100-sewage-pump?_pos=2\u0026amp;_psq=hippo\u0026amp;_ss=e\u0026amp;_v=1.0\u0026amp;variant=55972328309115\"\u003e Evak Hippo 100 \u003c\/a\u003e Sewage Pump (11m head) is a suitable upgrade.\u003c\/p\u003e\n\u003ch3\u003eOperational Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlow rate: 330 litres per minute\u003c\/li\u003e\n\u003cli\u003eMaximum head: 7 metres\u003c\/li\u003e\n\u003cli\u003eSolids handling: 50mm free passage\u003c\/li\u003e\n\u003cli\u003eLiquid temperature: up to 40°C\u003c\/li\u003e\n\u003cli\u003eMaximum submersion depth: 10 metres\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eAvailable versions:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e110V automatic (with float switch)\u003c\/li\u003e\n\u003cli\u003e230V automatic (with float switch)\u003c\/li\u003e\n\u003cli\u003e400V manual (3-phase)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 110V and 230V models provide automatic operation for standard sump installations, while the 400V manual option offers greater control where required.\u003c\/p\u003e\n\u003cp\u003eHorizontal or vertical discharge options are available, with horizontal discharge ideal for guide-rail installations.\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp\u003e1 × Evak Hippo 50 sewage pump\u003cbr\u003e1 × 10m heavy-duty rubber power cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHose tail connector is not included\u003cbr\u003e\u003cem\u003eImages are indicative only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe pump can also be bought as part of a sump and pump kit, as shown here: \u003ca rel=\"noopener\" href=\"https:\/\/floodandwaterpumps.co.uk\/products\/fps-iguazu-sump-foul-packaged-sewage-pump-station\" target=\"_blank\"\u003e FPS Iguazu Sump Foul \u003c\/a\u003e.\u003c\/p\u003e","brand":"EVAK","offers":[{"title":"Hippo 50 - 110v Auto (Industrial) \/ Vertical","offer_id":47653809127743,"sku":"EVK-HIP50-110-A","price":282.5,"currency_code":"GBP","in_stock":true},{"title":"Hippo 50 - 110v Auto (Industrial) \/ Horizontal","offer_id":55956296106363,"sku":"EVK-HIP50-110-A","price":282.5,"currency_code":"GBP","in_stock":false},{"title":"Hippo 50 - 230v Auto (3 Pin Domestic Plug) \/ Vertical","offer_id":47653809160511,"sku":"EVK-HIP50-230-A","price":274.17,"currency_code":"GBP","in_stock":true},{"title":"Hippo 50 - 230v Auto (3 Pin Domestic Plug) \/ Horizontal","offer_id":55956296139131,"sku":"EVK-HIP50-230-A","price":274.17,"currency_code":"GBP","in_stock":true},{"title":"Hippo 50 - 400v Manual (3 Phase) \/ Vertical","offer_id":47653809193279,"sku":"EVK-HIP50-400-M","price":282.5,"currency_code":"GBP","in_stock":false},{"title":"Hippo 50 - 400v Manual (3 Phase) \/ Horizontal","offer_id":55956296171899,"sku":"EVK-HIP50-400-M","price":282.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/evak-hippo-50-sewage-pump-6814-1-p.jpg?v=1706199830"},{"product_id":"evak-hippo-100-sewage-pump","title":"EVAK Hippo 100 Sewage Pump | 50mm Solids, 11m Head","description":"\n\u003ch2\u003eDirty Water \u0026amp; Sewage Pump – 50mm Solids Handling Submersible Pump\u003c\/h2\u003e\n\n\u003cstyle\u003e\n  a { text-decoration: none; color: #464feb; }\n  table { border-collapse: collapse; width: 100%; }\n  th, td { border: 1px solid #e6e6e6; padding: 10px; }\n  th { background-color: #f5f5f5; text-align: left; }\n  ul { margin: 0 0 16px 18px; }\n  h3 { margin: 18px 0 10px; }\n\u003c\/style\u003e\n\n\u003ch3\u003eWhy Choose the EVAK Hippo 100?\u003c\/h3\u003e\n\u003cp\u003e\n  The EVAK Hippo 100 is a robust, cost‑effective sewage pump designed for everyday domestic\n  and light‑commercial foul water applications. With 50mm solids handling, strong lift\n  performance, and durable construction, it provides reliable operation without the complexity\n  or cost of cutter or grinder pumps.\n\u003c\/p\u003e\n\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDomestic foul water pumping\u003c\/li\u003e\n  \u003cli\u003eSewage pumping chambers\u003c\/li\u003e\n  \u003cli\u003eBasements and cellars\u003c\/li\u003e\n  \u003cli\u003eGarden offices and outbuildings\u003c\/li\u003e\n  \u003cli\u003eFlood water containing solids\u003c\/li\u003e\n  \u003cli\u003eLight commercial wastewater systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDesign \u0026amp; Build Quality\u003c\/h3\u003e\n\u003cp\u003e\n  Built for durability, the Hippo 100 features a cast iron and stainless steel construction with\n  double mechanical seals for long service life. EVAK pumps are known for robust motors and\n  seal integrity, making them suitable for frequent cycling in demanding environments.\n  The pump features a recessed vortex impeller.\n\u003c\/p\u003e\n\n\u003ch3\u003ePerformance \u0026amp; Operating Capabilities\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum flow rate: \u003cstrong\u003e480 litres per minute\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eMaximum head: \u003cstrong\u003eapprox. 11 metres\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003e50mm free solids passage using a recessed vortex impeller\u003c\/li\u003e\n  \u003cli\u003eDesigned for dirty water, sewage, and foul water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis performance profile makes it suitable for the majority of UK domestic sewage installations.\u003c\/p\u003e\n\n\u003ch3\u003ePower Options\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e230V single‑phase – automatic – pendant float switch as standard\u003c\/li\u003e\n  \u003cli\u003e110V single‑phase – automatic – pendant float switch as standard\u003c\/li\u003e\n  \u003cli\u003e400V three‑phase – manual – can be used with a separate float switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOutlet Size \u0026amp; Connections\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e50mm discharge\u003c\/li\u003e\n  \u003cli\u003eDesigned for standard UK sewage pipework\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDurability \u0026amp; Protection\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble mechanical seals\u003c\/li\u003e\n  \u003cli\u003eHardwearing materials for long‑term reliability\u003c\/li\u003e\n  \u003cli\u003eSuitable for continuous use in typical domestic sewage temperatures\u003c\/li\u003e\n  \u003cli\u003eMaximum submersion depth: 10 metres\u003c\/li\u003e\n  \u003cli\u003eMaximum liquid temperature: 40°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWarranty \u0026amp; Support\u003c\/h3\u003e\n\u003cp\u003e\n  EVAK pumps are built for dependable, long‑term use and offer excellent value for money as a\n  practical sewage pumping solution for domestic installations. \u003cstrong\u003e1‑year warranty included.\u003c\/strong\u003e\n\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Hippo 100 Pump\u003c\/li\u003e\n  \u003cli\u003e1x 10m heavy duty rubber power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"EVAK","offers":[{"title":"Hippo 100 - 230v Auto (3 pin Domestic Plug) \/ Vertical","offer_id":47653913198911,"sku":"EVK-HIP100-230-A","price":324.17,"currency_code":"GBP","in_stock":false},{"title":"Hippo 100 - 230v Auto (3 pin Domestic Plug) \/ Horizontal","offer_id":55956325597563,"sku":"EVK-HIP100-230-A","price":324.17,"currency_code":"GBP","in_stock":true},{"title":"Hippo 100 - 110v Auto \/ Vertical","offer_id":55972328309115,"sku":"EVK-HIP100-110-A","price":324.17,"currency_code":"GBP","in_stock":false},{"title":"Hippo 100 - 110v Auto \/ Horizontal","offer_id":55972328341883,"sku":"EVK-HIP100-110-A","price":324.17,"currency_code":"GBP","in_stock":false},{"title":"Hippo 100 - 400v manual (3 Phase) \/ Vertical","offer_id":47653913231679,"sku":"EVK-HIP100-400-M","price":324.17,"currency_code":"GBP","in_stock":false},{"title":"Hippo 100 - 400v manual (3 Phase) \/ Horizontal","offer_id":55956325630331,"sku":"EVK-HIP100-400-M","price":324.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/evak-hippo-100-sewage-pump-choose-model-hippo-50-400v-manual-7463-p.jpg?v=1706200462"},{"product_id":"plastica-ag-series-pool-pump","title":"Plastica AG Pool Pump | Quiet, Salt-Safe, Small Pools","description":"\u003ch2 class=\"MsoNormal\"\u003eQuiet, Reliable Swimming Pool Pump for Above Ground \u0026amp; Small Pools\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe Plastica AG range is a high-quality, ultra-quiet \u003c\/span\u003e\u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/swimming-pool-pumps\" rel=\"noopener\" target=\"_blank\"\u003eswimming pool pump\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003edesigned for above ground pools, small residential pools and ornamental systems where reliability and low noise are critical. It is available as the AG8, AG10, AG14 and AG16.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelf-priming up to 1.8 metres and suitable for both chlorinated and salt water pools\u003c\/strong\u003e, the AG range is built for straightforward installation and long-term use in domestic environments.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eRunning at approximately 55dB, this is one of the quieter pool pumps in its class, making it ideal for domestic settings where louder pumps quickly become an issue.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you’re stepping up from a basic pump like the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/plastica-iflo-swimming-pool-pump\" rel=\"noopener\" target=\"_blank\"\u003eiFlo\u003c\/a\u003e, the AG range offers better materials, improved durability and more consistent long-term performance.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe AG pool pump from Plastica is the baby brother to the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/plastica-argonaut-av-series-pool-pump\" rel=\"noopener\" target=\"_blank\"\u003eArgonaut\u003c\/a\u003e, and has the same superior build quality to ensure high performance, durability and reliability.\u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\"\u003eWhere the Plastica AG Pump Works Best\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe AG series is ideal for:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003eabove-ground swimming pools\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003esmall residential in-ground pools\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003eornamental pools and water features\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l1 level1 lfo1; tab-stops: list 36.0pt;\"\u003einstallations where low noise is important\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eWith a quiet running level of approximately 55dB, it is well suited to gardens and residential settings where noise can become an issue.\u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\" style=\"mso-margin-top-alt: auto; mso-margin-bottom-alt: auto; line-height: normal; mso-outline-level: 2;\"\u003e\u003cspan style=\"mso-fareast-font-family: 'Times New Roman'; mso-bidi-font-family: 'Times New Roman'; mso-font-kerning: 0pt; mso-ligatures: none; mso-fareast-language: EN-GB;\"\u003eWhy Choose the AG Range?\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo2; tab-stops: list 36.0pt;\"\u003eUltra-quiet operation (approx. 55dB)\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003eSelf-priming to 1.8m for easier installation and use\u003c\/li\u003e\n\u003cli\u003eSuitable for chlorine and salt water pools\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003eManufactured and tested in the UK\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo2; tab-stops: list 36.0pt;\"\u003eHeavy-duty IP55 rated motor for long service life\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo2; tab-stops: list 36.0pt;\"\u003eDesigned for continuous pool circulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"MsoNormal\"\u003eBuild and Materials\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003eThis isn’t an entry-level pump. The AG range uses higher-grade materials designed to last:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l0 level1 lfo6; tab-stops: list 36.0pt;\"\u003eGlass-filled polypropylene pump body (chemical resistant)\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l0 level1 lfo6; tab-stops: list 36.0pt;\"\u003eAISI 316 stainless steel mechanical seal\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l0 level1 lfo6; tab-stops: list 36.0pt;\"\u003eStainless steel motor shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003eSuitable for use with:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo7; tab-stops: list 36.0pt;\"\u003eChlorine systems\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo7; tab-stops: list 36.0pt;\"\u003eBromine\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo7; tab-stops: list 36.0pt;\"\u003eIodine\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo7; tab-stops: list 36.0pt;\"\u003eSalt-treated pools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003eThis makes it a strong option where water chemistry would quickly degrade lower-grade pumps.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003e \u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003ePerformance and Models\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003eThere are four models available in the AG range: the AG8, AG10, AG14 and AG16.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003eThe motor ratings are shown as P1 (the input rating) and P2 (the output rating after friction losses etc):\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003e \u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo3; tab-stops: list 36.0pt;\"\u003e\u003cb\u003eAG8-2DC\u003c\/b\u003e\u003c\/li\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"circle\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level2 lfo3; tab-stops: list 72.0pt;\"\u003eP1: 0.29kW \/ 0.39hp\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level2 lfo3; tab-stops: list 72.0pt;\"\u003eP2: 0.19kW \/ 0.25hp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo3; tab-stops: list 36.0pt;\"\u003e\u003cb\u003eAG10-2DC\u003c\/b\u003e\u003c\/li\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"circle\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level2 lfo3; tab-stops: list 72.0pt;\"\u003eP1: 0.36kW \/ 0.48hp\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level2 lfo3; tab-stops: list 72.0pt;\"\u003eP2: 0.25kW \/ 0.33hp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo3; tab-stops: list 36.0pt;\"\u003e\u003cb\u003eAG14-2DC\u003c\/b\u003e\u003c\/li\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"circle\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level2 lfo3; tab-stops: list 72.0pt;\"\u003eP1: 0.49kW \/ 0.66hp\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level2 lfo3; tab-stops: list 72.0pt;\"\u003eP2: 0.37kW \/ 0.50hp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level1 lfo3; tab-stops: list 36.0pt;\"\u003e\u003cb\u003eAG16-2DC\u003c\/b\u003e\u003c\/li\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"circle\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level2 lfo3; tab-stops: list 72.0pt;\"\u003eP1: 0.67kW \/ 0.90hp\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l5 level2 lfo3; tab-stops: list 72.0pt;\"\u003eP2: 0.49kW \/ 0.66hp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eFlow rates typically range from 9m³\/hr to 16m³\/hr, depending on the system layout and installation.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAs with all pool pumps, correct sizing is key. Oversizing can lead to unnecessary energy use and reduced efficiency, so selection should be based on pool volume and pipework, not just motor size. Use the calculator on our \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/swimming-pool-pumps\" rel=\"noopener\" target=\"_blank\"\u003eswimming pool pumps\u003c\/a\u003e page to size on flow and head.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003eDesign Details\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003e \u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l7 level1 lfo4; tab-stops: list 36.0pt;\"\u003e\u003cb\u003e1.65 litre strainer basket\u003c\/b\u003e\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l7 level1 lfo4; tab-stops: list 36.0pt;\"\u003eClear lid for quick inspection and maintenance\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l7 level1 lfo4; tab-stops: list 36.0pt;\"\u003eDesigned for easy access and routine cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003eInstallation and Compatibility\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0cm;\"\u003e \u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l2 level1 lfo5; tab-stops: list 36.0pt;\"\u003eSupplied with \u003cb\u003e50mm (1.5”) ABS solvent weld unions\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l2 level1 lfo5; tab-stops: list 36.0pt;\"\u003e\n\u003cb\u003e2m pre-wired cable\u003c\/b\u003e included\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l2 level1 lfo5; tab-stops: list 36.0pt;\"\u003eStandard setup for most residential pool systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"MsoNormal\"\u003eProven Design\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eOriginally developed by Balboa Hydroair (USA), the AG pump has a long-standing reputation in the industry and has also been known as:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo8; tab-stops: list 36.0pt;\"\u003eITT Marlow AG\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo8; tab-stops: list 36.0pt;\"\u003eITT Hydroair AG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eNow manufactured and tested in the UK by Plastica, the same proven design continues with improved quality control. If you are replacing an ITT Marlow, ITT Hydroair or Balboa AG pump, this is the modern direct equivalent.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhat’s in the Box?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"font-family: 'Segoe UI Emoji',sans-serif; mso-bidi-font-family: 'Segoe UI Emoji';\"\u003e✅\u003c\/span\u003e 1 x Plastica AG Swimming Pool Pump\u003cbr\u003e\u003cspan style=\"font-family: 'Segoe UI Emoji',sans-serif; mso-bidi-font-family: 'Segoe UI Emoji';\"\u003e✅\u003c\/span\u003e 50mm \/ 1.5\u003cspan style=\"mso-ascii-font-family: Aptos; mso-hansi-font-family: Aptos; mso-bidi-font-family: Aptos;\"\u003e”\u003c\/span\u003e ABS solvent weld unions\u003cbr\u003e\u003cspan style=\"font-family: 'Segoe UI Emoji',sans-serif; mso-bidi-font-family: 'Segoe UI Emoji';\"\u003e✅\u003c\/span\u003e 2m pre-wired cable\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eNeed Help Choosing the Right Pump?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eNot sure whether the AG range is right for your pool, or how it compares to iFlo or Argonaut models?\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eRead our guide:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/blogs\/news\/understanding-the-plastica-range-of-swimming-pool-pumps\" rel=\"noopener\" target=\"_blank\"\u003eUnderstanding the Plastica Range of Swimming Pool Pumps\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 class=\"MsoNormal\"\u003eIs the Plastica AG pump suitable for salt water pools?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eYes. It uses a glass-filled polypropylene body, an AISI 316 stainless steel mechanical seal and a stainless steel motor shaft, so it handles chlorine, bromine, iodine and salt-chlorinated water without the early corrosion that affects lower-grade pumps.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eHow quiet is the Plastica AG pool pump?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eIt runs at approximately 55dB, one of the quietest pumps in its class. That makes it well suited to gardens, patios and residential settings where pump noise would otherwise be a problem.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhat size AG pump do I need?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eSize on flow and head, not horsepower. Aim to turn the whole pool over once every eight hours at your system's real head, then choose the smallest model that meets it. Use the calculator on our \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/swimming-pool-pumps\" rel=\"noopener\" target=\"_blank\"\u003eswimming pool pumps\u003c\/a\u003e page, or call us on 0115 987 0358 and we will size it with you.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eIs the AG pump a direct replacement for an ITT Marlow, Hydroair or Balboa AG pump?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eYes. It is the same proven design, originally developed by Balboa Hydroair and previously sold as the ITT Marlow AG and ITT Hydroair AG, now manufactured and tested in the UK by Plastica. It is the modern direct equivalent.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eIs the Plastica AG pump self-priming?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eYes, up to 1.8 metres. That makes installation and restarting after maintenance straightforward, as the pump draws water up rather than needing to be sited below pool level.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhat is included with the Plastica AG pump?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eEach pump ships with 50mm (1.5\") ABS solvent weld unions and a 2m pre-wired cable, the standard setup for most residential pool systems.\u003c\/p\u003e","brand":"Plastica","offers":[{"title":"AG8-2DC 0.25hp","offer_id":47662306263359,"sku":"PLA-AG8-025HP","price":265.83,"currency_code":"GBP","in_stock":true},{"title":"AG10-2DC 0.33hp","offer_id":47662306296127,"sku":"PLA-AG10-033HP","price":279.17,"currency_code":"GBP","in_stock":true},{"title":"AG14-2DC 0.50hp","offer_id":47662306328895,"sku":"PLA-AG14-050HP","price":282.5,"currency_code":"GBP","in_stock":true},{"title":"AG16-2DC 0.66hp","offer_id":47662306361663,"sku":"PLA-AG16-066HP","price":287.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Plastica_AG_Swimming_Pool_Pump_8.jpg?v=1778233397"},{"product_id":"plastica-argonaut-av-series-pool-pump","title":"Plastica Argonaut AV Pool Pump | High-Flow, Large \u0026 Commercial Pools","description":"\u003ch2 class=\"MsoNormal\"\u003eHigh-Performance Pool Pump for Larger Residential \u0026amp; Commercial Systems\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Plastica Argonaut range is a premium swimming pool pump, designed for larger residential pools, high-demand systems and commercial applications where performance, durability and continuous operation are critical.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis is the top tier of the Plastica range, built with higher-grade materials, larger capacity, and designed to handle more demanding installations than entry-level or mid-range pumps. The Argonaut is the big brother to the Plastica AG Series range.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eManufactured and tested in the UK, the Argonaut is engineered for \u003cb\u003elong-term, reliable operation\u003c\/b\u003e.\u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\"\u003eWhere the Argonaut Range Fits\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Argonaut is best suited to:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l8 level1 lfo1; tab-stops: list 36.0pt;\"\u003eLarger residential swimming pools\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l8 level1 lfo1; tab-stops: list 36.0pt;\"\u003eHigh-end domestic installations\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l8 level1 lfo1; tab-stops: list 36.0pt;\"\u003eCommercial or semi-commercial pool systems\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l8 level1 lfo1; tab-stops: list 36.0pt;\"\u003eSaltwater pools and aggressive chemical environments\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l8 level1 lfo1; tab-stops: list 36.0pt;\"\u003eSystems requiring \u003cb\u003econtinuous or heavy-duty operation\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eIf you’re comparing ranges:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/plastica-iflo-swimming-pool-pump\" rel=\"noopener\" target=\"_blank\"\u003eiFlo\u003c\/a\u003e = entry level\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\n\u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/plastica-ag-series-pool-pump\" rel=\"noopener\" target=\"_blank\"\u003eAG Series\u003c\/a\u003e = mid-range residential\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l4 level1 lfo2; tab-stops: list 36.0pt;\"\u003e\u003cb\u003eArgonaut = high-performance \/ heavy-duty\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"MsoNormal\"\u003eWhy Choose the Argonaut?\u003c\/h2\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo3; tab-stops: list 36.0pt;\"\u003eHigh flow rates (up to 32m³\/hr) for larger systems\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo3; tab-stops: list 36.0pt;\"\u003eSelf-priming up to 3 metres\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo3; tab-stops: list 36.0pt;\"\u003eDesigned for continuous 24-hour operation\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo3; tab-stops: list 36.0pt;\"\u003eSuitable for high saltwater concentrations\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo3; tab-stops: list 36.0pt;\"\u003eQuiet running (~60dB) for its performance class\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l3 level1 lfo3; tab-stops: list 36.0pt;\"\u003eAvailable in single phase and 3-phase options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eThis is a pump designed for systems where reliability matters, not just basic circulation.\u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\"\u003eBuilt for Demanding Environments\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Argonaut uses higher-grade materials throughout, making it suitable for long-term use in harsh conditions:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo4; tab-stops: list 36.0pt;\"\u003eAISI 316 stainless steel mechanical seal\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo4; tab-stops: list 36.0pt;\"\u003eStainless steel motor shaft\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo4; tab-stops: list 36.0pt;\"\u003e316 stainless steel nuts, bolts and fixings\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l6 level1 lfo4; tab-stops: list 36.0pt;\"\u003eGlass-filled polypropylene pump body\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eCompatible with:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l7 level1 lfo5; tab-stops: list 36.0pt;\"\u003eChlorine systems\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l7 level1 lfo5; tab-stops: list 36.0pt;\"\u003eBromine\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l7 level1 lfo5; tab-stops: list 36.0pt;\"\u003eIodine\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l7 level1 lfo5; tab-stops: list 36.0pt;\"\u003eSaltwater pools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eThis level of material specification is what separates the Argonaut from lower-cost alternatives.\u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\"\u003ePerformance and Model Range\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eMotor sizes range from:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l5 level1 lfo6; tab-stops: list 36.0pt;\"\u003e0.33hp (0.24kW)\u003cbr\u003eto\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l5 level1 lfo6; tab-stops: list 36.0pt;\"\u003e2.0hp (1.5kW)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eFlow rates typically range from:\u003c\/p\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"mso-list: l0 level1 lfo7; tab-stops: list 36.0pt;\"\u003e13m³\/hr to 32m³\/hr, depending on system layout and pipework\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eAs with all pool pumps, correct sizing is essential. Larger is not always better, the system should be matched to the pool volume and filtration setup. Use the calculator on our \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/swimming-pool-pumps\" rel=\"noopener\" target=\"_blank\"\u003eswimming pool pumps\u003c\/a\u003e page to size on flow and head.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003ePractical Design Features\u003c\/h3\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l9 level1 lfo8; tab-stops: list 36.0pt;\"\u003e\n\u003cb\u003e1.75 litre strainer basket\u003c\/b\u003e for debris capture\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l9 level1 lfo8; tab-stops: list 36.0pt;\"\u003eClear lid for quick inspection and maintenance\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l9 level1 lfo8; tab-stops: list 36.0pt;\"\u003eDesigned for ease of access and servicing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"MsoNormal\"\u003eInstallation and Compatibility\u003c\/h3\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l2 level1 lfo9; tab-stops: list 36.0pt;\"\u003eSupplied with \u003cb\u003e63mm (2”) ABS solvent weld unions\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l2 level1 lfo9; tab-stops: list 36.0pt;\"\u003eIncludes reducers for \u003cb\u003e50mm (1.5”) pipework\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l2 level1 lfo9; tab-stops: list 36.0pt;\"\u003eAvailable in \u003cb\u003esingle-phase and three-phase configurations\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eSuitable for both new installations and upgrades to larger systems.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eSingle Phase 230V Models\u003c\/h3\u003e\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" width=\"542\" style=\"border-collapse: collapse; width: 405pt;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"429\" style=\"mso-width-source: userset; mso-width-alt: 14626; width: 321pt;\"\u003e \u003ccol width=\"113\" style=\"mso-width-source: userset; mso-width-alt: 3840; width: 84pt;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr height=\"19\" style=\"height: 14.25pt;\"\u003e\n\u003ctd height=\"19\" class=\"xl66\" width=\"429\" style=\"height: 14.25pt; width: 321pt;\"\u003eAV50 0.33hp Single Phase\u003c\/td\u003e\n\u003ctd class=\"xl65\" width=\"113\" style=\"width: 84pt;\"\u003eAV50-2DN-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"19\" style=\"height: 14.25pt;\"\u003e\n\u003ctd height=\"19\" class=\"xl66\" style=\"height: 14.25pt;\"\u003eAV75 0.5hp Single Phase\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003eAV75-2DN-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"19\" style=\"height: 14.25pt;\"\u003e\n\u003ctd height=\"19\" class=\"xl66\" style=\"height: 14.25pt;\"\u003eAV100 0.75hp Single Phase\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003eAV100-2DN-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"19\" style=\"height: 14.25pt;\"\u003e\n\u003ctd height=\"19\" class=\"xl66\" style=\"height: 14.25pt;\"\u003eAV150 1.0hp Single Phase\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003eAV150-2DN-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"19\" style=\"height: 14.25pt;\"\u003e\n\u003ctd height=\"19\" class=\"xl66\" style=\"height: 14.25pt;\"\u003eAV200 1.5hp Single Phase\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003eAV200-2DN-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"19\" style=\"height: 14.25pt;\"\u003e\n\u003ctd height=\"19\" class=\"xl66\" style=\"height: 14.25pt;\"\u003eAV250 2.0hp Single Phase\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003eAV250-2DN-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e3 Phase 400V Models\u003c\/h3\u003e\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" width=\"542\" style=\"border-collapse: collapse; width: 405pt;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"429\" style=\"mso-width-source: userset; mso-width-alt: 14626; width: 321pt;\"\u003e \u003ccol width=\"113\" style=\"mso-width-source: userset; mso-width-alt: 3840; width: 84pt;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr height=\"19\" style=\"height: 14.25pt;\"\u003e\n\u003ctd height=\"19\" class=\"xl66\" width=\"429\" style=\"height: 14.25pt; width: 321pt;\"\u003eAV50 0.33hp 3 Phase\u003c\/td\u003e\n\u003ctd class=\"xl65\" width=\"113\" style=\"width: 84pt;\"\u003eAV50-3DN-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"19\" style=\"height: 14.25pt;\"\u003e\n\u003ctd height=\"19\" class=\"xl66\" style=\"height: 14.25pt;\"\u003eAV75 0.5hp 3 Phase\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003eAV75-3DN-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"19\" style=\"height: 14.25pt;\"\u003e\n\u003ctd height=\"19\" class=\"xl66\" style=\"height: 14.25pt;\"\u003eAV100 0.75hp 3 Phase\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003eAV100-3DN-S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"19\" style=\"height: 14.25pt;\"\u003e\n\u003ctd height=\"19\" class=\"xl66\" style=\"height: 14.25pt;\"\u003eAV150 1.0hp 3 Phase\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003eAV150-3DN-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"19\" style=\"height: 14.25pt;\"\u003e\n\u003ctd height=\"19\" class=\"xl66\" style=\"height: 14.25pt;\"\u003eAV200 1.5hp 3 Phase\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003eAV200-3DN-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"19\" style=\"height: 14.25pt;\"\u003e\n\u003ctd height=\"19\" class=\"xl66\" style=\"height: 14.25pt;\"\u003eAV250 2.0hp 3 Phase\u003c\/td\u003e\n\u003ctd class=\"xl65\"\u003eAV250-3DN-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWarranty\u003c\/h3\u003e\n\u003cul style=\"margin-top: 0cm;\" type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l1 level1 lfo10; tab-stops: list 36.0pt;\"\u003e3 years on pump body\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l1 level1 lfo10; tab-stops: list 36.0pt;\"\u003e2 years on motor\u003c\/li\u003e\n\u003cli class=\"MsoNormal\" style=\"margin-bottom: 0cm; mso-list: l1 level1 lfo10; tab-stops: list 36.0pt;\"\u003e1 year on mechanical seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\" style=\"margin: 0cm 0cm 0cm 36.0pt;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eManufactured in the UK\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eEvery Argonaut pump is manufactured and tested in the UK, ensuring consistent quality and reliability across the range.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhat’s in the Box?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"font-family: 'Segoe UI Emoji',sans-serif; mso-bidi-font-family: 'Segoe UI Emoji';\"\u003e✅\u003c\/span\u003e Plastica Argonaut Swimming Pool Pump\u003cbr\u003e\u003cspan style=\"font-family: 'Segoe UI Emoji',sans-serif; mso-bidi-font-family: 'Segoe UI Emoji';\"\u003e✅\u003c\/span\u003e 63mm (2\u003cspan style=\"mso-ascii-font-family: Aptos; mso-hansi-font-family: Aptos; mso-bidi-font-family: Aptos;\"\u003e”\u003c\/span\u003e) ABS solvent weld unions\u003cbr\u003e\u003cspan style=\"font-family: 'Segoe UI Emoji',sans-serif; mso-bidi-font-family: 'Segoe UI Emoji';\"\u003e✅\u003c\/span\u003e Reducers for 50mm (1.5\u003cspan style=\"mso-ascii-font-family: Aptos; mso-hansi-font-family: Aptos; mso-bidi-font-family: Aptos;\"\u003e”\u003c\/span\u003e) pipework\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eNot Sure Which Pump You Need?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eChoosing the right pump size and specification is critical, especially on larger systems.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eRead our guide:\u003cbr\u003e\u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/blogs\/news\/understanding-the-plastica-range-of-swimming-pool-pumps\" rel=\"noopener\" target=\"_blank\"\u003e\u003cb\u003eUnderstanding the Plastica Range of Swimming Pool Pumps\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2 class=\"MsoNormal\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhat size Argonaut pump do I need?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eSize on flow and head, not horsepower. Aim to turn the whole pool over once every eight hours at your system's real head, then choose the smallest model that meets it. On larger and commercial systems oversizing wastes energy and can push water through the filter too fast to clean it. Use the calculator on our \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/swimming-pool-pumps\" rel=\"noopener\" target=\"_blank\"\u003eswimming pool pumps\u003c\/a\u003e page, or call us on 0115 987 0358 and we will size it with you.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eShould I choose single-phase or three-phase?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eSingle-phase 230V suits most domestic installations. Three-phase 400V is for larger or commercial systems with a three-phase supply and tends to run more efficiently at higher powers. Three-phase pumps must be checked for correct rotation with a phase rotation meter on installation, as running them backwards can cause damage and void the warranty. If you are not sure what supply you have, ask your electrician or call us before ordering.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eIs the Argonaut suitable for salt water pools?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eYes, including high salt concentrations. It uses an AISI 316 stainless steel mechanical seal, a stainless motor shaft, 316 stainless fixings and a glass-filled polypropylene body, so it resists the corrosion that degrades lower-grade pumps in salt-chlorinated and aggressive chemical environments.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eHow is the Argonaut different from the AG and iFlo?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/plastica-iflo-swimming-pool-pump\" rel=\"noopener\" target=\"_blank\"\u003eiFlo\u003c\/a\u003e is the entry-level pump for smaller domestic pools, and the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/plastica-ag-series-pool-pump\" rel=\"noopener\" target=\"_blank\"\u003eAG Series\u003c\/a\u003e is the mid-range residential choice. The Argonaut is the high-performance, heavy-duty option, with higher flow (up to 32m³\/hr), self-priming to 3 metres, 316 stainless fixings and single or three-phase models, built for larger pools and continuous duty.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eIs the Argonaut self-priming?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eYes, up to 3 metres, so it can be sited above pool water level. For reliable priming, keep the suction pipe short and air-tight, fill the strainer basket before start-up and make sure all valves are open. Never run the pump dry, as this damages the seal.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhat does the Argonaut need for installation?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eIt should be bolted to a solid base to limit vibration, sited somewhere accessible with good drainage, and fitted with a non-return valve directly after the pump to stop reverse flow. Electrically it must be on its own circuit, installed by a qualified electrician, and protected by an RCD or GFCI rated at no more than 30mA. It is supplied with 63mm (2\") unions plus reducers for 50mm (1.5\") pipework.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhat warranty does the Argonaut come with?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThree years on the pump body, two years on the motor and one year on the mechanical seal. Note that allowing the pump to freeze or run dry will void the warranty.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"Plastica","offers":[{"title":"AV50-2DN 0.33hp Single Phase","offer_id":47662318584127,"sku":"PLA-ARG-AV50-1P","price":390.83,"currency_code":"GBP","in_stock":true},{"title":"AV75-2DN 0.5hp Single Phase","offer_id":47662318616895,"sku":"PLA-ARG-AV75-1P","price":399.17,"currency_code":"GBP","in_stock":true},{"title":"AV100-2DN 0.75hp Single Phase","offer_id":47662318649663,"sku":"PLA-ARG-AV100-1P","price":465.83,"currency_code":"GBP","in_stock":true},{"title":"AV150-2DN 1.0hp Single Phase","offer_id":47662318682431,"sku":"PLA-ARG-AV150-1P","price":482.5,"currency_code":"GBP","in_stock":true},{"title":"AV200-2DN 1.5hp Single Phase","offer_id":47662318715199,"sku":"PLA-ARG-AV200-1P","price":507.5,"currency_code":"GBP","in_stock":true},{"title":"AV250-2DN 2.0hp Single Phase","offer_id":47662318747967,"sku":"PLA-ARG-AV250-1P","price":607.5,"currency_code":"GBP","in_stock":true},{"title":"AV50-3DN 0.33hp 3 Phase","offer_id":47662318780735,"sku":"PLA-ARG-AV50-3P","price":395.83,"currency_code":"GBP","in_stock":true},{"title":"AV75-3DN 0.5hp 3 Phase","offer_id":47662318813503,"sku":"PLA-ARG-AV75-3P","price":404.17,"currency_code":"GBP","in_stock":true},{"title":"AV100-3DN 0.75hp 3 Phase","offer_id":47662318846271,"sku":"PLA-ARG-AV100-3P","price":415.83,"currency_code":"GBP","in_stock":true},{"title":"AV150-3DN 1.0hp 3 Phase","offer_id":47662318879039,"sku":"PLA-ARG-AV150-3P","price":599.17,"currency_code":"GBP","in_stock":true},{"title":"AV200-3DN 1.5hp 3 Phase","offer_id":47662318911807,"sku":"PLA-ARG-AV200-3P","price":699.17,"currency_code":"GBP","in_stock":true},{"title":"AV250-3DN 2.0hp 3 Phase","offer_id":47662318944575,"sku":"PLA-ARG-AV250-3P","price":765.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/plastica-argonaut-av-series-pool-pump-choose-model-av250-2.0hp-3-phase-7529-p.jpg?v=1721144100"},{"product_id":"fps-iguazu-sump-635-packaged-pump-station","title":"190 Litre Grey Water Pump Station, 6m head | FPS Iguazu 635","description":"\u003ch2\u003eFPS Iguazu Sump 635 Packaged Pump Station\u003c\/h2\u003e\n\u003cp\u003eThe FPS Iguazu Sump 635 is a complete, ready-to-install packaged pump station that automatically removes groundwater, light grey water and flood water.\u003c\/p\u003e\n\u003cp\u003eIt pairs a 190 litre high-grade MDPE chamber with the automatic \u003ca href=\"\/products\/ama-drainer-301\"\u003eAMA Drainer 301 submersible pump\u003c\/a\u003e, which has a maximum flow rate of 166 litres per minute and a maximum rated head of 6.5 metres. It is our most straightforward and cost-effective station, and the one most often specified for basement waterproofing and domestic flood resilience.\u003c\/p\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eWater can enters through a perimeter channel, a 110mm pipe connection, or the opening at the top of the chamber. The chamber can also be drilled to allow groundwater to enter if installed externally. Typical installations are basements, garages, patios, driveways and gardens, and it integrates well into perimeter flood protection systems alongside flood barriers and flood walls.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for toilet waste.\u003c\/strong\u003e This is a clean, grey and flood water station, suitable for grey water from showers and basins, but it must not be connected to a W.C. or any foul drainage. For toilet waste, see our foul range: the \u003ca href=\"\/products\/fps-iguazu-sump-foul-packaged-sewage-pump-station\"\u003eSump Foul\u003c\/a\u003e, \u003ca href=\"\/products\/fps-iguazu-sump-foul-pro-packaged-sewage-pump-station\"\u003eFoul Pro\u003c\/a\u003e and \u003ca href=\"\/products\/fps-iguazu-sump-feka-stainless-steel-sewage-pump-station-feka-vs-750\"\u003eFEKA\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eAutomatic operation\u003c\/h3\u003e\n\u003cp\u003eThe pump is switched by a float on an arm, which reduces the risk of snagging compared with a hanging float. The chamber fills, the float rises, the pump runs and then turns off, clearing a useful depth on each cycle rather than switching on and off over a few centimetres. Because it is installed below ground and operates on its own, it does not need anyone present, which is the main advantage over a portable puddle pump during a flood. One customer told us their Iguazu ran automatically during flooding while they were away in Australia and kept the property dry.\u003c\/p\u003e\n\u003cp\u003eYou will see in the gallery that some installations use a drilled lid so water can enter the chamber. In these instances the clients had two lids, one with holes they would deploy when there was flood warning, and the original lid for day-to-day use. A finished installation can be very discreet, with neat drainage channels and only an inspection chamber lid visible. \u003c\/p\u003e\n\u003ch3\u003eFlow rate and head\u003c\/h3\u003e\n\u003cp\u003eThe AMA Drainer 301 has a maximum flow rate of 166 litres per minute and a maximum rated head of 6.5 metres.\u003c\/p\u003e\n\u003cp\u003eThese are the two ends of the pump curve rather than a single duty point: at 6.5 metres the flow has fallen to zero, and the full 166 litres per minute is only available with no lift at all. What you actually get sits between the two, where the curve meets the resistance of your pipework. Our \u003ca href=\"\/pages\/hose-pipe-friction-loss-calculator\"\u003epump performance calculator\u003c\/a\u003e works that out for your pipe run, and \u003ca href=\"\/blogs\/news\/how-to-read-a-pump-curve\"\u003ehow to read a pump curve\u003c\/a\u003e explains the principle.\u003c\/p\u003e\n\u003cp\u003eIn practice this is why the 635 is our most popular station. That flow is comfortably enough for the great majority of duties, and it is well matched to the size of the chamber, which matters more than raw output.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #0B5390; background: #f2f7fb; padding: 14px 18px; margin: 20px 0; border-radius: 4px;\"\u003e\n\u003cp style=\"margin: 0; color: #13212b;\"\u003e\u003cstrong\u003eUnderstanding flow rate:\u003c\/strong\u003e To put a pump’s flow rate into perspective, a typical outside tap delivers around 10 to 15 litres of water per minute.\u003c\/p\u003e\n\u003cp style=\"margin: 0; color: #13212b;\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0; color: #13212b;\"\u003eA pump rated at 100 litres per minute could therefore move roughly the same volume of water as 7 to 10 outside taps running at once.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eA pump with far more capacity than the inflow empties the chamber in seconds and restarts moments later, and that short cycling can wear pumps out.\u003c\/p\u003e\n\u003cp\u003eThe AMA Drainer 301 is a KSB pump with a strong reliability record, using a compact arm float that works in narrow chambers without snagging, a thermally protected motor and 10mm solids handling. It draws 0.43 kW (P1) for a 0.18 kW (P2) motor output. \u003c\/p\u003e\n\u003ch3\u003eThe chamber\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRobust high-grade MDPE chamber with a flanged base, 190 litre storage capacity\u003c\/li\u003e\n\u003cli\u003e610mm diameter x 635mm high\u003c\/li\u003e\n\u003cli\u003e1¼ inch (32mm) internal pipework, pre-installed, with non-return valve and coupling\u003c\/li\u003e\n\u003cli\u003eDischarges through a 32mm outlet terminating in a 1¼ inch male thread\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e450mm pedestrian rated cover and frame\u003c\/li\u003e\n\u003cli\u003e1 year warranty \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFull pump performance figures are in the specification table further down this page.\u003c\/p\u003e\n\u003ch3\u003eInstallation and discharge\u003c\/h3\u003e\n\u003cp\u003eThe chamber should be installed on a concrete bed and surrounded with concrete to prevent flotation and movement. Depending on the desired installation, these chambers are often connected with fixed PVC delivery pipe, or with suction and delivery hose, matched to the outlet size.\u003c\/p\u003e\n\u003cp\u003eThe chamber outlet terminates in a 1¼ inch male thread and discharges through 32mm pipework, so use 32mm rigid pipe and fittings secured with solvent weld, or \u003ca href=\"\/collections\/hoses-suction-delivery\"\u003esuction and delivery hose\u003c\/a\u003e with a \u003ca rel=\"noopener\" href=\"https:\/\/floodandwaterpumps.co.uk\/products\/hose-tail-c-w-female-bsp-swivel?_pos=1\u0026amp;_psq=hose+tail\u0026amp;_psid=d948fd94f\u0026amp;_ss=e\u0026amp;_v=1.0\u0026amp;variant=47639003365695\" target=\"_blank\"\u003e32mm female hose tail\u003c\/a\u003e. The hose option is made up from three parts: a hose tail, the hose, and a hose clip. Add them to your order alongside the station.\u003c\/p\u003e\n\u003cp\u003eWhen installed internally, the chamber would usually be fitted with a recessed, sealed lid, allowing the surrounding floor finish to be continued across it while helping to contain odours and moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSupplied as a complete plug and play unit, ready for installation. Some on-site work is required, including connecting components, drilling entry holes for cables and routing wiring through a suitable conduit. Read our guide to \u003ca href=\"\/blogs\/news\/what-is-a-sump-pump-and-how-do-you-install-one\"\u003einstalling a sump pump\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eImages are indicative only. Photographs may show optional extras, accessories or pipework that are not included in this listing, and the chamber is shown cut open in some images to reveal the internal components. Your chamber is supplied whole. Please refer to the specification and the list of what is included above.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-level alarm:\u003c\/strong\u003e audible warning of rising water levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery backup:\u003c\/strong\u003e suitable for light grey water duties such as wash basins. It is not intended to run continuously through a flood event.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessed cover, sealed and locking:\u003c\/strong\u003e recommended wherever the chamber is installed internally. Factory fitted single neoprene seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor requirements this range does not cover, larger chambers are available by quote. See \u003ca href=\"\/pages\/below-ground-pump-stations-tanks\"\u003ebelow-ground pump stations and tanks\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eImportant: design and installation is site specific\u003c\/h3\u003e\n\u003cp\u003ePump station design and installation is site specific. You should always consult a suitably qualified engineer to determine the correct configuration and installation method for your application, and a qualified electrician for the electrical connection.\u003c\/p\u003e\n\u003cp\u003eWe supply equipment. We do not provide site-specific design or installation advice over the phone, because the correct configuration depends on levels, flows, ground conditions and the discharge route. Where a project needs calculations, a specification or a design, see our \u003ca href=\"\/pages\/engineering-review\"\u003eengineering review service\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eRelated reading\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/avoiding-common-sump-pump-mistakes-we-see-these-a-lot\"\u003eFive sump pump mistakes we see often\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/what-is-a-sump-pump-and-how-do-you-install-one\"\u003eWhat is a sump pump and how do you install one\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Flood Protection Solutions","offers":[{"title":"Sump 635 with Standard Polypropylene Circular Cover","offer_id":47701405663551,"sku":"FPS-IGZ635-STD","price":395.0,"currency_code":"GBP","in_stock":true},{"title":"Sump 635 with Standard Polypropylene Circular Cover + Add High Water Alarm","offer_id":47701415297343,"sku":"FPS-IGZ635-STD-HWA","price":550.0,"currency_code":"GBP","in_stock":true},{"title":"Sump 635 with Standard Polypropylene Circular Cover + Add High Water Alarm \u0026 Battery Back-up","offer_id":47701415330111,"sku":"FPS-IGZ635-STD-HWA-BBU","price":1255.0,"currency_code":"GBP","in_stock":true},{"title":"Sump 635 with Recessed Sealed \u0026 Locking Cover","offer_id":47701415362879,"sku":"FPS-IGZ635-RLC","price":595.0,"currency_code":"GBP","in_stock":true},{"title":"Sump 635 with Recessed Sealed \u0026 Locking Cover + Add High Water Alarm","offer_id":47701405696319,"sku":"FPS-IGZ635-RLC-HWA","price":750.0,"currency_code":"GBP","in_stock":true},{"title":"Sump 635 with Recessed Sealed \u0026 Locking Cover + Add High Water Alarm \u0026 Battery Back-up","offer_id":47701405729087,"sku":"FPS-IGZ635-RLC-HWA-BBU","price":1455.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Sump_Pump_Iguazu.jpg?v=1763219543"},{"product_id":"ama-drainer-301","title":"AMA Drainer 301 230V Submersible Drainage Pump | Manual \u0026 Automatic","description":"\u003ch2 class=\"MsoNormal\"\u003eAMA Drainer 301 Automatic Submersible Water Pump 230v - Great for Sump Stations\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe AMA Drainer 301 is one of the UK’s best-selling automatic submersible water pumps, known for its versatility, reliability, and compact design. This single-phase 230v drainage pump is fitted with a 0.18 kW motor and can operate at immersion depths of up to 2 metres, making it ideal for both domestic and light commercial use.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe pump features a 1¼\" (32mm) outlet complete with an integrated non-return valve for efficient discharge and backflow prevention.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eTypical Applications\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe AMA Drainer 301 is suitable for a wide range of water drainage and pumping applications, including:\u003c\/p\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eDraining wastewater, surface water or groundwater\u003c\/li\u003e\n\u003cli style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eFloodwater removal from pits, shafts, yards, and cellars\u003c\/li\u003e\n\u003cli style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eWater extraction from rivers, reservoirs, or storage tanks\u003c\/li\u003e\n\u003cli style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eBasement drainage and underground passage pumping\u003c\/li\u003e\n\u003cli style=\"mso-list: l0 level1 lfo1; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eAs a pumped drainage system where gravity drainage is not viable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"MsoNormal\"\u003eAutomatic Operation and Float Switch Design\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eEach pump is fitted with an arm float switch that automatically switches the pump on when water is detected and off once it’s removed.\u003cbr\u003eThis compact float design makes it suitable for narrow sumps and chambers, where traditional pendant floats may snag or fail to activate reliably.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eFrom the factory, the ‘on’ level is set at 145 mm and the ‘off’ level at 70 mm. These can be adjusted up to 375 mm and 295 mm, allowing flexible setup for different installations. In manual mode, the pump can remove water down to 15 mm in depth.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe magnetic float switch is wear‑resistant and highly reliable, features a fully sealed casing with no internal passage.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eDesign and Build Quality\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eWeighing only 4.5 kg, the AMA Drainer 301 is lightweight yet durable. The high-quality plastic casing is abrasion- and impact-resistant, and its noise-absorbing design ensures quiet operation.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe frame-cooled enclosed motor includes thermal overload protection, allowing safe operation even when the motor is not fully submerged.\u003cbr\u003eThe pump handles solids up to 10 mm and delivers dependable performance in challenging drainage environments.\u003c\/p\u003e\n\u003ch4 class=\"MsoNormal\"\u003eIntegration with Packaged Pump Stations\u003c\/h4\u003e\n\u003cp class=\"MsoNormal\"\u003eThis pump is also available as part of our \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/packaged-pump-stations\/products\/fps-iguazu-sump-635-packaged-pump-station\"\u003eFPS Iguazu 635 Packaged Sump System\u003c\/a\u003e, providing a ready-to-install, plug-and-play drainage solution for flood and groundwater management.\u003c\/p\u003e\n\u003ch4 class=\"MsoNormal\"\u003eWhat’s Included\u003c\/h4\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"mso-list: l2 level1 lfo2; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e1 × AMA Drainer 301 Pump \u003c\/li\u003e\n\u003cli style=\"mso-list: l2 level1 lfo2; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e1 × 10 m heavy-duty rubber power cable\u003c\/li\u003e\n\u003cli style=\"mso-list: l2 level1 lfo2; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e1 × Non-return valve\u003c\/li\u003e\n\u003cli style=\"mso-list: l2 level1 lfo2; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eSchuko 3-pin adaptor and 230 V plug\u003c\/li\u003e\n\u003cli style=\"mso-list: l2 level1 lfo2; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003e1-year manufacturer’s warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA hose tail is not included; however, these can be \u003cstrong data-end=\"95\" data-start=\"61\"\u003eadded to your order separately\u003c\/strong\u003e if required.\u003c\/p\u003e\n\u003ch4 class=\"MsoNormal\"\u003e\n\u003cspan style=\"font-family: 'Segoe UI Emoji',sans-serif; mso-bidi-font-family: 'Segoe UI Emoji';\"\u003e✅\u003c\/span\u003e Key Benefits\u003c\/h4\u003e\n\u003cul type=\"disc\" style=\"margin-top: 0cm;\"\u003e\n\u003cli style=\"mso-list: l1 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eAutomatic operation with reliable float switch\u003c\/li\u003e\n\u003cli style=\"mso-list: l1 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eSuitable for floodwater, grey water, and general drainage\u003c\/li\u003e\n\u003cli style=\"mso-list: l1 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eEasy to install and maintain\u003c\/li\u003e\n\u003cli style=\"mso-list: l1 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eLightweight yet highly durable\u003c\/li\u003e\n\u003cli style=\"mso-list: l1 level1 lfo3; tab-stops: list 36.0pt;\" class=\"MsoNormal\"\u003eCompatible with FPS Iguazu 635 Packaged Pump Stations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"KSB","offers":[{"title":"Default Title","offer_id":47805435281727,"sku":"39300072","price":145.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/ama-drainer-301-submersible-pump-7289-p-359806.png?v=1715872424"},{"product_id":"plastica-iflo-swimming-pool-pump","title":"Plastica iFlo Pool Pump | Small Pools, 230V","description":"\u003ch2 data-section-id=\"daknxq\" data-start=\"785\" data-end=\"826\"\u003ePlastica iFlo Swimming Pool Pump Range\u003c\/h2\u003e\n\u003cp data-start=\"828\" data-end=\"1004\"\u003eThe Plastica iFlo range is a simple, reliable and cost-effective swimming pool pump, designed for smaller residential pools where performance, ease of use and value matter.\u003c\/p\u003e\n\u003cp data-start=\"1006\" data-end=\"1179\"\u003eIf you're looking for a straightforward replacement pump or setting up a new system, the iFlo range offers a practical, no-nonsense solution without overcomplicating things.\u003c\/p\u003e\n\u003cp data-start=\"1181\" data-end=\"1319\"\u003eBacked by Plastica’s manufacturing quality, these pumps come with a 2-year warranty on the electronics and 1 year on the pump housing.\u003c\/p\u003e\n\u003ch2 data-section-id=\"15gmgxh\" data-start=\"1321\" data-end=\"1343\"\u003eWhere the Plastica iFlo Fits\u003c\/h2\u003e\n\u003cp data-start=\"1448\" data-end=\"1481\"\u003eThe iFlo range is best suited to:\u003c\/p\u003e\n\u003cul data-start=\"1483\" data-end=\"1662\"\u003e\n\u003cli data-section-id=\"5vi7qk\" data-start=\"1483\" data-end=\"1520\"\u003esmall to medium residential pools\u003c\/li\u003e\n\u003cli data-section-id=\"198dxbk\" data-start=\"1521\" data-end=\"1543\"\u003eabove-ground pools\u003c\/li\u003e\n\u003cli data-section-id=\"18dwcco\" data-start=\"1544\" data-end=\"1575\"\u003edomestic filtration systems\u003c\/li\u003e\n\u003cli data-section-id=\"64vjw0\" data-start=\"1576\" data-end=\"1662\"\u003eusers looking for a cost-effective replacement for pumps such as the Sta-Rite 5P2R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1664\" data-end=\"1838\"\u003eIt’s a good option where you want reliable circulation without oversizing the system, which can lead to unnecessary energy use and noise.\u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1664\" data-end=\"1838\"\u003eNot sure which model is right for your pool?\u003c\/h3\u003e\n\u003cp data-start=\"1664\" data-end=\"1838\"\u003eWe’ve broken down the full Plastica range, including how to size your pump properly:\u003cbr data-start=\"789\" data-end=\"792\"\u003e\u003ca data-start=\"795\" data-end=\"1041\" rel=\"noopener\" class=\"decorated-link\" href=\"https:\/\/floodandwaterpumps.co.uk\/blogs\/news\/understanding-the-plastica-range-of-swimming-pool-pumps?srsltid=AfmBOorAaEblkKxdnrPKcZIw8d1bJL_a4ETOIMlD3chjJGmx-MvgIkXh\u0026amp;utm_source=chatgpt.com\"\u003eUnderstanding the Plastica Range of Swimming Pool Pumps\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2 data-section-id=\"1ma7m6t\" data-start=\"1840\" data-end=\"1855\"\u003eKey Features\u003c\/h2\u003e\n\u003cul data-start=\"1857\" data-end=\"2284\"\u003e\n\u003cli data-section-id=\"utq9nn\" data-start=\"1857\" data-end=\"1923\"\u003e\n\u003cstrong data-start=\"1859\" data-end=\"1885\"\u003eSelf-priming pool pump\u003c\/strong\u003e – easier installation and operation\u003c\/li\u003e\n\u003cli data-section-id=\"v1jtx\" data-start=\"1924\" data-end=\"1985\"\u003e\n\u003cstrong data-start=\"1926\" data-end=\"1949\"\u003eUltra-quiet running\u003c\/strong\u003e – ideal for domestic environments\u003c\/li\u003e\n\u003cli data-section-id=\"121eff2\" data-start=\"1986\" data-end=\"2049\"\u003e\n\u003cstrong data-start=\"1988\" data-end=\"2019\"\u003eHeavy-duty air-cooled motor\u003c\/strong\u003e designed for continuous use\u003c\/li\u003e\n\u003cli data-section-id=\"8p4wsl\" data-start=\"2050\" data-end=\"2130\"\u003e\n\u003cstrong data-start=\"2052\" data-end=\"2081\"\u003eOversized strainer basket\u003c\/strong\u003e with clear inspection lid for easy maintenance\u003c\/li\u003e\n\u003cli data-section-id=\"5etdgj\" data-start=\"2131\" data-end=\"2210\"\u003e\n\u003cstrong data-start=\"2133\" data-end=\"2155\"\u003eHigh-load impeller\u003c\/strong\u003e designed specifically for swimming pool applications\u003c\/li\u003e\n\u003cli data-section-id=\"1jwaqgw\" data-start=\"2211\" data-end=\"2284\"\u003eSupplied with \u003cstrong data-start=\"2227\" data-end=\"2249\"\u003estandard 230V plug\u003c\/strong\u003e for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-section-id=\"bnwp2i\" data-start=\"2286\" data-end=\"2305\"\u003eBuild and Design\u003c\/h3\u003e\n\u003cp data-start=\"2307\" data-end=\"2358\"\u003eThe iFlo has been designed with durability in mind.\u003c\/p\u003e\n\u003cul data-start=\"2360\" data-end=\"2499\"\u003e\n\u003cli data-section-id=\"1pj8mc4\" data-start=\"2360\" data-end=\"2400\"\u003eThermoplastic pump body and impeller\u003c\/li\u003e\n\u003cli data-section-id=\"1fnbult\" data-start=\"2401\" data-end=\"2445\"\u003eStainless steel components for longevity\u003c\/li\u003e\n\u003cli data-section-id=\"125igzx\" data-start=\"2446\" data-end=\"2499\"\u003eRobust casing suitable for regular pool operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2501\" data-end=\"2567\"\u003eThis is a pump built to do the job without unnecessary complexity.\u003c\/p\u003e\n\u003ch2 data-section-id=\"gjz9xm\" data-start=\"2569\" data-end=\"2594\"\u003ePerformance and Models\u003c\/h2\u003e\n\u003cp data-start=\"2596\" data-end=\"2660\"\u003eThere are three models in the iFlo range, all operating on 230V:\u003c\/p\u003e\n\u003cul data-start=\"2662\" data-end=\"2858\"\u003e\n\u003cli data-section-id=\"1aig1c0\" data-start=\"2662\" data-end=\"2726\"\u003e\n\u003cstrong data-start=\"2664\" data-end=\"2674\"\u003eSPF075\u003c\/strong\u003e\n\u003cul data-start=\"2677\" data-end=\"2726\"\u003e\n\u003cli data-section-id=\"xelo77\" data-start=\"2677\" data-end=\"2706\"\u003eFlow rate: 166 litres\/min\u003c\/li\u003e\n\u003cli data-section-id=\"1q1u524\" data-start=\"2709\" data-end=\"2726\"\u003eWeight: 9.5kg\u003c\/li\u003e\n\u003cli data-section-id=\"1q1u524\" data-start=\"2709\" data-end=\"2726\"\u003ePower: \u003cspan\u003e0.56kW\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"1vjjf8m\" data-start=\"2728\" data-end=\"2791\"\u003e\n\u003cstrong data-start=\"2730\" data-end=\"2740\"\u003eSPF100\u003c\/strong\u003e\n\u003cul data-start=\"2743\" data-end=\"2791\"\u003e\n\u003cli data-section-id=\"16iz8bp\" data-start=\"2743\" data-end=\"2772\"\u003eFlow rate: 250 litres\/min\u003c\/li\u003e\n\u003cli data-section-id=\"tgdy1r\" data-start=\"2775\" data-end=\"2791\"\u003eWeight: 10kg\u003c\/li\u003e\n\u003cli data-section-id=\"tgdy1r\" data-start=\"2775\" data-end=\"2791\"\u003ePower: 0.75\/kW\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"8gy1jq\" data-start=\"2793\" data-end=\"2858\"\u003e\n\u003cstrong data-start=\"2795\" data-end=\"2805\"\u003eSPF150\u003c\/strong\u003e\n\u003cul data-start=\"2808\" data-end=\"2858\"\u003e\n\u003cli data-section-id=\"twse8b\" data-start=\"2808\" data-end=\"2837\"\u003eFlow rate: 283 litres\/min\u003c\/li\u003e\n\u003cli data-section-id=\"ds505g\" data-start=\"2840\" data-end=\"2858\"\u003eWeight: 11.4kg\u003c\/li\u003e\n\u003cli data-section-id=\"ds505g\" data-start=\"2840\" data-end=\"2858\"\u003ePower: 1.12kW\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2860\" data-end=\"3001\"\u003eAs a general rule, selection should be based on the size of the pool and system requirements, not simply choosing the largest pump available.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1fzypgc\" data-start=\"3003\" data-end=\"3036\"\u003eInstallation and Compatibility\u003c\/h3\u003e\n\u003cul data-start=\"3038\" data-end=\"3196\"\u003e\n\u003cli data-section-id=\"1ttbl1n\" data-start=\"3038\" data-end=\"3091\"\u003eFits \u003cstrong data-start=\"3045\" data-end=\"3089\"\u003e1.5” (48.3mm) industry standard pipework\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"poqzgj\" data-start=\"3092\" data-end=\"3134\"\u003eSupplied with pipe unions for ABS pipe\u003c\/li\u003e\n\u003cli data-section-id=\"m5hq0m\" data-start=\"3135\" data-end=\"3196\"\u003eDesigned for straightforward swap-out or new installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-section-id=\"14z1rqw\" data-start=\"3198\" data-end=\"3221\"\u003eOperating Conditions\u003c\/h3\u003e\n\u003cul data-start=\"3223\" data-end=\"3320\"\u003e\n\u003cli data-section-id=\"1oemlqb\" data-start=\"3223\" data-end=\"3273\"\u003eSuitable for water temperatures up to \u003cstrong data-start=\"3263\" data-end=\"3271\"\u003e35°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"1fd1lpl\" data-start=\"3274\" data-end=\"3320\"\u003eDesigned for clean, chlorinated pool water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-section-id=\"12i8a4x\" data-start=\"3322\" data-end=\"3343\"\u003eWhat’s in the Box?\u003c\/h3\u003e\n\u003cp data-start=\"3345\" data-end=\"3414\"\u003e✅ 1 x Plastica iFlo Swimming Pool Pump\u003cbr data-start=\"3383\" data-end=\"3386\"\u003e✅ Pipe unions for ABS pipe\u003c\/p\u003e","brand":"Plastica","offers":[{"title":"iflo SFP075 - 230V","offer_id":55339992220027,"sku":"PLA-IFLO-SFP075-230","price":224.17,"currency_code":"GBP","in_stock":true},{"title":"iflo SFP100 - 230V","offer_id":47807696896319,"sku":"PLA-IFLO-SFP100-230","price":249.17,"currency_code":"GBP","in_stock":true},{"title":"iflo SFP150 - 230V","offer_id":47807696929087,"sku":"PLA-IFLO-SFP150-230","price":257.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Plastica_iFlo_Series_Swimming_Pool_Pump_2.jpg?v=1778232999"},{"product_id":"fps-iguazu-sump-twin-packaged-dual-pump-station","title":"190 Litre Twin Pump Grey Water Pump Station, 6m head | FPS Iguazu Twin","description":"\u003ch2\u003eFPS Iguazu Sump 635 Twin Packaged Pump Station\u003c\/h2\u003e\n\u003cp\u003eThe FPS Iguazu Sump 635 Twin is the two-pump version of our most popular station. It pairs a 190 litre high-grade MDPE chamber with two automatic \u003ca href=\"\/products\/ama-drainer-301\"\u003eAMA Drainer 301 submersible pumps\u003c\/a\u003e, each with a maximum flow rate of 166 litres per minute and a maximum rated head of 6.5 metres.\u003c\/p\u003e\n\u003cp\u003eThe second pump is there for resilience: if one pump fails or is being serviced, the other continues to work. It is the option to choose where a failure would mean water ingress. \u003c\/p\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eThe same duties as the \u003ca href=\"\/products\/fps-iguazu-sump-635-packaged-pump-station\"\u003esingle Iguazu Sump 635\u003c\/a\u003e: groundwater, light grey water from showers and hand basins, and flood water. Water enters through a perimeter channel, a 110mm pipe connection or the clear opening at the top, and the chamber can be drilled to allow groundwater in when installed externally. It is a common specification for Type C basement waterproofing, where continuity of pumping matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for toilet waste.\u003c\/strong\u003e Suitable for grey water from showers and basins, but it must not be connected to a W.C. or foul drainage. For toilet waste, see our foul range: the \u003ca href=\"\/products\/fps-iguazu-sump-foul-packaged-sewage-pump-station\"\u003eSump Foul\u003c\/a\u003e, \u003ca href=\"\/products\/fps-iguazu-sump-foul-pro-packaged-sewage-pump-station\"\u003eFoul Pro\u003c\/a\u003e and \u003ca href=\"\/products\/fps-iguazu-sump-feka-stainless-steel-sewage-pump-station-feka-vs-750\"\u003eFEKA\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow the two pumps work together\u003c\/h3\u003e\n\u003cdiv style=\"border-left: 4px solid #0B5390; background: #f2f7fb; padding: 14px 18px; margin: 20px 0; border-radius: 4px;\"\u003e\n\u003cp style=\"margin: 0; color: #13212b;\"\u003e\u003cstrong\u003eAdded pump resilience:\u003c\/strong\u003e The float switches can be set at different levels so that one pump operates as the primary pump. The second pump only activates if the water rises further because the first pump has failed or cannot cope with the incoming flow. This duty-and-assist arrangement provides additional pumping capacity and system redundancy, helping to reduce the risk of flooding caused by a single pump failure or unusually heavy water ingress.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eWhere both pumps run together the combined output is up to 332 litres per minute. Note that a battery backup supports one pump only; two systems are needed to back up both.\u003c\/p\u003e\n\u003ch3\u003eFlow rate and head\u003c\/h3\u003e\n\u003cp\u003eEach AMA Drainer 301 has a maximum flow rate of 166 litres per minute and a maximum rated head of 6.5 metres, so the pair can move up to 332 litres per minute when both run together.\u003c\/p\u003e\n\u003cp\u003eThese are the two ends of the pump curve rather than a single duty point: at 6.5 metres the flow has fallen to zero, and the full 166 litres per minute is only available with no lift at all. What you actually get sits between the two, where the curve meets the resistance of your pipework. Our \u003ca href=\"\/pages\/hose-pipe-friction-loss-calculator\"\u003epump performance calculator\u003c\/a\u003e works that out for your pipe run, and \u003ca href=\"\/blogs\/news\/how-to-read-a-pump-curve\"\u003ehow to read a pump curve\u003c\/a\u003e explains the principle.\u003c\/p\u003e\n\u003cdiv style=\"border-left: 4px solid #0B5390; background: #f2f7fb; padding: 14px 18px; margin: 20px 0; border-radius: 4px;\"\u003e\n\u003cp style=\"margin: 0; color: #13212b;\"\u003e\u003cstrong\u003eUnderstanding flow rate:\u003c\/strong\u003e To put a pump’s flow rate into perspective, a typical outside tap delivers around 10 to 15 litres of water per minute. A pump rated at 100 litres per minute could therefore move roughly the same volume of water as 7 to 10 outside taps running at once.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eAs with the single 635, the value here is that the pumps are well matched to the chamber rather than oversized. Staggering the on levels means the second pump only starts when the level keeps rising, which avoids both pumps short cycling on a small inflow. Each pump draws 0.43 kW (P1) for a 0.18 kW (P2) motor output. Full pump detail is on the \u003ca href=\"\/products\/ama-drainer-301\"\u003eAMA Drainer 301 product page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eThe chamber\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRobust high-grade MDPE chamber with a flanged base, 190 litre storage capacity\u003c\/li\u003e\n\u003cli\u003e610mm diameter x 635mm high\u003c\/li\u003e\n\u003cli\u003e1¼ inch (32mm)internal pipework, pre-installed, with non-return valve and coupling\u003c\/li\u003e\n\u003cli\u003eDischarges through a 32mm outlet terminating in a 1¼ inch male thread\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e450mm pedestrian rated cover and frame\u003c\/li\u003e\n\u003cli\u003eTwo pumps\u003c\/li\u003e\n\u003cli\u003e1 year warranty \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFull pump performance figures are in the specification table further down this page.\u003c\/p\u003e\n\u003ch3\u003eInstallation and discharge\u003c\/h3\u003e\n\u003cp\u003eCan be installed internally or externally depending on site requirements.\u003c\/p\u003e\n\u003cp\u003eThe chamber should be installed on a concrete bed and surrounded with concrete to prevent flotation and movement. Depending on the desired installation, these chambers are often connected with fixed PVC delivery pipe, or with suction and delivery hose, matched to the outlet size. The chamber outlet terminates in a 1¼ inch male thread and discharges through 32mm pipework, so use 32mm rigid pipe and fittings secured with solvent weld, or \u003ca href=\"\/collections\/hoses-suction-delivery\"\u003esuction and delivery hose\u003c\/a\u003e. The hose option is made up from three parts: a hose tail, the hose, and a hose clip.\u003c\/p\u003e\n\u003cp\u003eWhen installed internally, the chamber would usually be fitted with a recessed, sealed lid, allowing the surrounding floor finish to be continued across it while helping to contain odours and moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSupplied as a complete plug and play unit, ready for installation. Some on-site work is required, including reconnecting components, drilling entry holes for cables and routing wiring through a suitable conduit. Read our guide to \u003ca href=\"\/blogs\/news\/what-is-a-sump-pump-and-how-do-you-install-one\"\u003einstalling a sump pump\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eImages are indicative only. Photographs may show optional extras, accessories or pipework that are not included in this listing, and the chamber is shown cut open in some images to reveal the internal components. Your chamber is supplied whole. \u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-level alarm:\u003c\/strong\u003e audible warning of rising water levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery backup:\u003c\/strong\u003e powers one of the two pumps. Suitable for light grey water duties, not for continuous operation through a flood event.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessed cover, sealed and locking:\u003c\/strong\u003e recommended for internal installation. Factory fitted single neoprene seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant: design and installation is site specific\u003c\/h3\u003e\n\u003cp\u003ePump station design and installation is site specific. You should always consult a suitably qualified engineer to determine the correct configuration and installation method for your application, and a qualified electrician for the electrical connection.\u003c\/p\u003e\n\u003cp\u003eWe supply equipment. We do not provide site-specific design or installation advice over the phone, because the correct configuration depends on levels, flows, ground conditions and the discharge route. Where a project needs calculations, a specification or a design, see our \u003ca href=\"\/pages\/engineering-review\"\u003eengineering review service\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eRelated reading\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/avoiding-common-sump-pump-mistakes-we-see-these-a-lot\"\u003eFive sump pump mistakes we see often\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/what-is-a-sump-pump-and-how-do-you-install-one\"\u003eWhat is a sump pump and how do you install one\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Flood Protection Solutions","offers":[{"title":"Sump Twin with Standard Polypropylene Circular Cover","offer_id":48057776275775,"sku":"FPS-IGZTWIN-STD","price":525.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Twin with Standard Polypropylene Circular Cover + Add High Water Alarm","offer_id":48057776308543,"sku":"FPS-IGZTWIN-STD-HWA","price":680.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Twin with Standard Polypropylene Circular Cover + Add High Water Alarm \u0026 Battery Back-up","offer_id":48057776341311,"sku":"FPS-IGZTWIN-STD-HWA-BBU","price":1385.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Twin with Recessed Sealed \u0026 Locking Cover","offer_id":48057776374079,"sku":"FPS-IGZTWIN-RLC","price":725.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Twin with Recessed Sealed \u0026 Locking Cover + Add High Water Alarm","offer_id":48057776406847,"sku":"FPS-IGZTWIN-RLC-HWA","price":880.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Twin with Recessed Sealed \u0026 Locking Cover + Add High Water Alarm \u0026 Battery Back-up","offer_id":48057776439615,"sku":"FPS-IGZTWIN-RLC-HWA-BBU","price":1585.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Iguazu_Twin_Packaged_Pump_Station_3.jpg?v=1784538222"},{"product_id":"fps-iguazu-sump-foul-packaged-sewage-pump-station","title":"190 Litre Sewage \u0026 Foul Water Pump Station, 7m Head | FPS Iguazu Foul","description":"\u003ch2\u003eFPS Iguazu Sump Foul Packaged Pump Station\u003c\/h2\u003e\n\u003cp\u003eThe FPS Iguazu Sump Foul is our standard packaged sewage pump station, for foul water from basements and ground floor extensions where gravity drainage is not possible.\u003c\/p\u003e\n\u003cp\u003eIt pairs a 190 litre high-grade MDPE chamber with the \u003ca href=\"\/products\/evak-hippo-50-sewage-pump\"\u003eEVAK Hippo 50 sewage pump\u003c\/a\u003e, with a maximum flow rate of 330 litres per minute and a maximum rated head of 7 metres.\u003c\/p\u003e\n\u003cp\u003eThe vortex impeller passes solids up to 50mm. For a typical domestic foul duty it is the often the right size, and is the best value in the range.\u003c\/p\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eA common application is collecting foul water from a W.C. or utility room and discharging it to the main sewer. A typical example is the foul sewage from an annex, a garden room or a property extension.\u003c\/p\u003e\n\u003cp\u003eIt is also used in flood defence systems to drain void spaces, and to manage external water and low-lying areas where gravity drainage is not viable.\u003c\/p\u003e\n\u003cp\u003eChoosing between the three foul stations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSump Foul\u003c\/strong\u003e (Hippo 50, 330 L\/min to 7m): the standard domestic foul station.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fps-iguazu-sump-foul-pro-packaged-sewage-pump-station\"\u003eSump Foul Pro\u003c\/a\u003e (Hippo 100, 480 L\/min to 11m): for larger or higher-demand sites, or a long or high discharge run.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fps-iguazu-sump-feka-stainless-steel-sewage-pump-station-feka-vs-750\"\u003eSump FEKA\u003c\/a\u003e (stainless, 400 L\/min to 7.5m): for harsher conditions or intermittent use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBigger is not automatically better. A pump with far more capacity than the inflow empties the chamber quickly and switches on and off too often, and that short cycling shortens pump life. The float switch fills and empties the chamber on a sensible cycle when the station is correctly matched to the duty.\u003c\/p\u003e\n\u003ch3\u003eFlow rate and head\u003c\/h3\u003e\n\u003cp\u003eThe EVAK Hippo 50 has a maximum flow rate of 330 litres per minute and a maximum rated head of 7 metres.\u003c\/p\u003e\n\u003cp\u003eThese are the two ends of the pump curve rather than a single duty point: at 7 metres the flow has fallen to zero, and the full 330 litres per minute is only available with no lift at all. What you actually get sits between the two, where the curve meets the resistance of your pipework. Our \u003ca href=\"\/pages\/hose-pipe-friction-loss-calculator\"\u003epump performance calculator\u003c\/a\u003e works that out for your pipe run, and \u003ca href=\"\/blogs\/news\/how-to-read-a-pump-curve\"\u003ehow to read a pump curve\u003c\/a\u003e explains the principle.\u003c\/p\u003e\n\u003ch3\u003eThe chamber\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRobust high-grade MDPE chamber with a flanged base, 190 litre storage capacity\u003c\/li\u003e\n\u003cli\u003e610mm diameter x 635mm high\u003c\/li\u003e\n\u003cli\u003eOne or two 110mm inlets - to be drilled on site.\u003c\/li\u003e\n\u003cli\u003e2 inch internal pipework, pre-installed, with non-return valve and coupling\u003c\/li\u003e\n\u003cli\u003eChamber outlet terminates in a 2 inch male BSP thread, designed to pump through a 63mm pump main\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e450mm pedestrian rated cover and frame\u003c\/li\u003e\n\u003cli\u003e1 year warranty \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFull pump performance figures are in the specification table further down this page.\u003c\/p\u003e\n\u003ch3\u003eInstallation and discharge\u003c\/h3\u003e\n\u003cp\u003eOften installed internally or externally. When installed internally, the chamber would usually be fitted with a recessed, sealed lid, allowing the surrounding floor finish to be continued across it while helping to contain odours and moisture.\u003c\/p\u003e\n\u003cp\u003eDepending on the desired installation, these chambers are often connected with fixed PVC delivery pipe, or with suction and delivery hose, matched to the outlet size. The chamber outlet terminates in a 2 inch male BSP thread, and the station is designed to pump through a 63mm pump main. Alternatively, use 50mm (2 inch) \u003ca href=\"\/collections\/hoses-suction-delivery\"\u003esuction and delivery hose\u003c\/a\u003e. The hose option is made up from three parts: a hose tail, the hose, and a hose clip.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSupplied as a complete plug and play unit, ready for installation. Some on-site work is required, including reconnecting components, drilling entry holes for cables and routing wiring through a suitable conduit. Read our guide to \u003ca href=\"\/blogs\/news\/what-is-a-sump-pump-and-how-do-you-install-one\"\u003einstalling a sump pump\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eImages are indicative only. Photographs may show optional extras, accessories or pipework that are not included in this listing, and the chamber is shown cut open in some images to reveal the internal components. Your chamber is supplied whole. Please refer to the specification and the list of what is included above.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eA real installation\u003c\/h3\u003e\n\u003cp\u003eThe gallery includes an external installation at a property where patio doors had a limited threshold and were exposed to flooding. Gravity drainage was not possible, because the area sat lower than the discharge point and roof drainage had no formal connection, so the Iguazu Foul provided the solution. The video shows the site before installation, with photographs afterwards. It has operated reliably for many years since, and the finished installation is discreet, with minimal visual impact.\u003c\/p\u003e\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-level alarm:\u003c\/strong\u003e early warning of rising water levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery backup system:\u003c\/strong\u003e suitable for grey and foul duties such as wash basins. It is not intended to run continuously through a flood event.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessed cover, sealed and locking:\u003c\/strong\u003e recommended for internal use and for any foul installation. Factory fitted single neoprene seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eUsed regularly, the Sump Foul needs very little maintenance. The hardest condition for any pump is standing unused for long periods in damp conditions, which can cause components to seize, so run it periodically. Where a system will be used infrequently, the stainless \u003ca href=\"\/products\/fps-iguazu-sump-feka-stainless-steel-sewage-pump-station-feka-vs-750\"\u003eSump FEKA\u003c\/a\u003e is often the better choice. The gallery includes a short maintenance video.\u003c\/p\u003e\n\u003ch3\u003eImportant: design and installation is site specific\u003c\/h3\u003e\n\u003cp\u003ePump station design and installation is site specific. You should always consult a suitably qualified engineer to determine the correct configuration and installation method for your application, and a qualified electrician for the electrical connection.\u003c\/p\u003e\n\u003cp\u003eInstalling or altering foul drainage in England falls under Building Regulations, and Approved Document H is the guidance used to demonstrate compliance, including sizing the chamber around the number of people served. See \u003ca href=\"\/blogs\/news\/sewage-pump-building-regulations\"\u003esewage pumps and Building Regulations explained\u003c\/a\u003e, and confirm the position for your project with your local building control body.\u003c\/p\u003e\n\u003cp\u003eWe supply equipment. We do not provide site-specific design or installation advice over the phone. Where a project needs calculations, a specification or a design, see our \u003ca href=\"\/pages\/engineering-review\"\u003eengineering review service\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flood Protection Solutions","offers":[{"title":"Sump Foul with Standard Polypropylene Circular Cover","offer_id":48217947472191,"sku":"FPS-IGZFOUL-H50-STD","price":625.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Foul with Standard Polypropylene Circular Cover + Add High Water Alarm","offer_id":48217947504959,"sku":"FPS-IGZFOUL-H50-STD-HWA","price":780.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Foul with Standard Polypropylene Circular Cover + Add Battery Back-up","offer_id":48220859040063,"sku":"FPS-IGZFOUL-H50-STD-BBU","price":1330.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Foul with Standard Polypropylene Circular Cover + Add High Water Alarm \u0026 Battery Back-up","offer_id":48217947537727,"sku":"FPS-IGZFOUL-H50-STD-HWA-BBU","price":1485.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Foul with Recessed Sealed \u0026 Locking Cover","offer_id":48217947570495,"sku":"FPS-IGZFOUL-H50-RLC","price":825.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Foul with Recessed Sealed \u0026 Locking Cover + Add High Water Alarm","offer_id":48217947603263,"sku":"FPS-IGZFOUL-H50-RLC-HWA","price":980.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Foul with Recessed Sealed \u0026 Locking Cover + Add Battery Back-up","offer_id":48220859072831,"sku":"FPS-IGZFOUL-H50-RLC-BBU","price":1530.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Foul with Recessed Sealed \u0026 Locking Cover + Add High Water Alarm \u0026 Battery Back-up","offer_id":48217947636031,"sku":"FPS-IGZFOUL-H50-HWA-BBU","price":1685.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Iguazu_Foul_Hippo_4.jpg?v=1784538222"},{"product_id":"fps-iguazu-sump-foul-pro-packaged-sewage-pump-station","title":"190 Litre High-Flow Sewage Pump Station, 11m Head | FPS Iguazu Foul Pro","description":"\u003ch2\u003eFPS Iguazu Sump Foul Pro Packaged Pump Station\u003c\/h2\u003e\n\u003cp\u003eThe FPS Iguazu Sump Foul Pro is a packaged sewage pump station for foul water from basements and ground floor extensions where gravity drainage is not possible. It pairs a 190 litre high-grade MDPE chamber with the \u003ca href=\"\/products\/evak-hippo-100-sewage-pump\"\u003eEVAK Hippo 100 sewage pump\u003c\/a\u003e, with a maximum flow rate of 480 litres per minute and a maximum rated head of 11 metres. The vortex impeller passes solids up to 50mm. It is the higher-capacity of our two cast iron foul stations, and the one to choose where the discharge run is long or the lift is high.\u003c\/p\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eA common application is collecting foul water from a W.C. or utility room and discharging it to the main sewer. A typical example is the foul sewage from an annex, a garden room or a property extension.\u003c\/p\u003e\n\u003cp\u003eIt is also used in flood defence systems and to manage external water where gravity drainage is not viable.\u003c\/p\u003e\n\u003cp\u003eChoosing between the three foul stations:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fps-iguazu-sump-foul-packaged-sewage-pump-station\"\u003eSump Foul\u003c\/a\u003e (Hippo 50, 330 L\/min to 7m): the standard domestic foul station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSump Foul Pro\u003c\/strong\u003e (Hippo 100, 480 L\/min to 11m): more flow and notably more head, for larger or higher-demand installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fps-iguazu-sump-feka-stainless-steel-sewage-pump-station-feka-vs-750\"\u003eSump FEKA\u003c\/a\u003e (stainless, 400 L\/min to 7.5m): for harsher conditions or intermittent use, where corrosion resistance matters more than outright output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt is worth sizing this properly rather than buying the biggest. A pump with far more capacity than the inflow will empty the chamber quickly and switch on and off too often, and that short cycling shortens pump life.\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003eDue to the higher power draw of the EVAK Hippo 100, this system cannot be used with a battery backup.\u003c\/i\u003e\u003c\/p\u003e\n\u003ch3\u003eFlow rate and head\u003c\/h3\u003e\n\u003cp\u003eThe EVAK Hippo 100 has a maximum flow rate of 480 litres per minute and a maximum rated head of 11 metres. The pump uses a vortex impeller for 50mm free passage.\u003c\/p\u003e\n\u003cp\u003eThese are the two ends of the pump curve rather than a single duty point: at 11 metres the flow has fallen to zero, and the full 480 litres per minute is only available with no lift at all. What you actually get sits between the two, where the curve meets the resistance of your pipework. Our \u003ca href=\"\/pages\/hose-pipe-friction-loss-calculator\"\u003epump performance calculator\u003c\/a\u003e works that out for your pipe run, and \u003ca href=\"\/blogs\/news\/how-to-read-a-pump-curve\"\u003ehow to read a pump curve\u003c\/a\u003e explains the principle.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EVAK Hippo 100 is a robust, cost‑effective sewage pump designed for everyday domestic and light‑commercial foul water applications. With 50mm solids handling, strong lift performance, and durable construction, it provides reliable operation without the complexity or cost of cutter or grinder pumps.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eThe chamber\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRobust high-grade MDPE chamber with a flanged base, 190 litre storage capacity\u003c\/li\u003e\n\u003cli\u003e610mm diameter x 635mm high\u003c\/li\u003e\n\u003cli\u003eConnect one or two 110mm inlets, to be drilled on site\u003c\/li\u003e\n\u003cli\u003e2 inch internal pipework, pre-installed, with non-return valve and coupling\u003c\/li\u003e\n\u003cli\u003eChamber outlet terminates in a 2 inch male BSP thread, designed to pump through a 63mm pump main\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e450mm pedestrian rated cover and frame\u003c\/li\u003e\n\u003cli\u003e1 year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFull pump performance figures are in the specification table further down this page.\u003c\/p\u003e\n\u003ch3\u003eInstallation and discharge\u003c\/h3\u003e\n\u003cp\u003eCan be installed internally or externally. Depending on the desired installation, these chambers are often connected with fixed PVC delivery pipe, or with suction and delivery hose, matched to the outlet size.\u003c\/p\u003e\n\u003cp\u003eThe chamber outlet terminates in a 2 inch male BSP thread, and the station is designed to pump through a 63mm pump main. Alternatively, use 50mm (2 inch) \u003ca href=\"\/collections\/hoses-suction-delivery\"\u003esuction and delivery hose\u003c\/a\u003e. The hose option is made up from three parts: a hose tail, the hose, and a hose clip. The gallery shows the system connected with 50mm delivery hose buried underground for a tidy, concealed finish.\u003c\/p\u003e\n\u003cp\u003eWhen installed internally, the chamber would usually be fitted with a recessed, sealed lid, allowing the surrounding floor finish to be continued across it while helping to contain odours and moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSupplied as a complete plug and play unit, ready for installation. Some on-site work is required, including reconnecting components, drilling entry holes for cables and routing wiring through a suitable conduit. Read our guide to \u003ca href=\"\/blogs\/news\/what-is-a-sump-pump-and-how-do-you-install-one\"\u003einstalling a sump pump\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eImages are indicative only. Photographs may show optional extras, accessories or pipework that are not included in this listing, and the chamber is shown cut open in some images to reveal the internal components. Your chamber is supplied whole. Please refer to the specification and the list of what is included above.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eReal installations\u003c\/h3\u003e\n\u003cp\u003eThe gallery shows installations using grey solvent weld pipework (which we do not supply) and others using our green suction and delivery hose. You can see the system installed in a garage floor for flood water removal, and externally as a pumped drainage system, both finished with a discreet lid. In the garage installation, if water enters through the walls or floor even with a flood barrier in place, the station removes it automatically.\u003c\/p\u003e\n\u003ch3\u003eOptions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-level alarm:\u003c\/strong\u003e early warning of rising water levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessed cover, sealed and locking:\u003c\/strong\u003e recommended for internal use and for any foul installation, to contain odour and manage overflow. Factory fitted single neoprene seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaintenance\u003c\/h3\u003e\n\u003cp\u003eUsed regularly, the Foul Pro needs very little maintenance. The hardest condition for any pump is standing unused for long periods in damp conditions, which can cause components to seize, so run it periodically.\u003c\/p\u003e\n\u003cp\u003eWhere a system will be used infrequently, the stainless \u003ca href=\"\/products\/fps-iguazu-sump-feka-stainless-steel-sewage-pump-station-feka-vs-750\"\u003eSump FEKA\u003c\/a\u003e is often the better choice.\u003c\/p\u003e\n\u003cp\u003eThe gallery includes a short maintenance video.\u003c\/p\u003e\n\u003ch3\u003eImportant: design and installation is site specific\u003c\/h3\u003e\n\u003cp\u003ePump station design and installation is site specific. You should always consult a suitably qualified engineer to determine the correct configuration and installation method for your application, and a qualified electrician for the electrical connection.\u003c\/p\u003e\n\u003cp\u003eInstalling or altering foul drainage in England falls under Building Regulations, and Approved Document H is the guidance used to demonstrate compliance, including sizing the chamber around the number of people served. See \u003ca href=\"\/blogs\/news\/sewage-pump-building-regulations\"\u003esewage pumps and Building Regulations explained\u003c\/a\u003e, and confirm the position for your project with your local building control body.\u003c\/p\u003e\n\u003cp\u003eWe supply equipment. We do not provide site-specific design or installation advice over the phone. Where a project needs calculations, a specification or a design, see our \u003ca href=\"\/pages\/engineering-review\"\u003eengineering review service\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flood Protection Solutions","offers":[{"title":"Sump Foul with Standard Polypropylene Circular Cover","offer_id":48221023338815,"sku":"FPS-IGZFOULPRO-H100-STD","price":665.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Foul with Standard Polypropylene Circular Cover + Add High Water Alarm","offer_id":48221023371583,"sku":"FPS-IGZFOULPRO-H100-STD-HWA","price":820.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Foul with Recessed Sealed \u0026 Locking Cover","offer_id":48221023469887,"sku":"FPS-IGZFOULPRO-H100-RLC","price":855.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Foul with Recessed Sealed \u0026 Locking Cover + Add High Water Alarm","offer_id":48221023502655,"sku":"FPS-IGZFOULPRO-H100-RLC-HWA","price":1010.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Iguazu_Foul_Hippo_5.jpg?v=1784538222"},{"product_id":"fps-iguazu-sump-feka-stainless-steel-sewage-pump-station-feka-vs-750","title":"190 Litre Stainless Steel Sewage Pump Station | FPS Iguazu FEKA","description":"\u003ch2\u003eFPS Iguazu Sump FEKA Stainless Steel Packaged Pump Station\u003c\/h2\u003e\n\u003cp\u003eThe FPS Iguazu Sump FEKA is our premium foul water station, pairing a 190 litre high-grade MDPE chamber with a stainless steel FEKA VS 750 submersible sewage pump.\u003c\/p\u003e\n\u003cp\u003eIt has a maximum flow rate of 400 litres per minute and a maximum rated head of 7.5 metres, with 50mm free passage. The reason to choose it over the cast iron models is durability: an AISI 304 stainless body with an AISI 316 motor shaft resists corrosion, which matters in harsher effluent and in systems that sit unused between uses.\u003c\/p\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCollecting foul water from W.C.s and utility rooms below sewer level\u003c\/li\u003e\n\u003cli\u003eLifting wastewater to the main sewer\u003c\/li\u003e\n\u003cli\u003eFlood water drainage, internal or external\u003c\/li\u003e\n\u003cli\u003eDomestic and commercial installations\u003c\/li\u003e\n\u003cli\u003eInstallations used intermittently, where a cast iron pump is more likely to seize\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you need more output and the environment is not harsh, the \u003ca href=\"\/products\/fps-iguazu-sump-foul-pro-packaged-sewage-pump-station\"\u003eSump Foul Pro\u003c\/a\u003e gives 480 L\/min to 11m. For a standard domestic foul duty, the \u003ca href=\"\/products\/fps-iguazu-sump-foul-packaged-sewage-pump-station\"\u003eSump Foul\u003c\/a\u003e is the value option.\u003c\/p\u003e\n\u003ch3\u003eWhy the stainless pump\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless construction:\u003c\/strong\u003e AISI 304 stainless throughout with a tougher AISI 316 motor shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-clog vortex impeller:\u003c\/strong\u003e microcast steel, passes solids up to 50mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble mechanical seal:\u003c\/strong\u003e non-toxic oil chamber between the seals protects the motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet, efficient motor:\u003c\/strong\u003e cooled by the pumped liquid, on long-life low-noise ball bearings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic operation:\u003c\/strong\u003e 230V single-phase, 10m power cable and float switch included.\u003c\/li\u003e\n\u003cli\u003eMaximum liquid temperature 35°C, maximum 20 starts per hour, rated for continuous submerged duty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis station is supplied as 230V single-phase.\u003c\/p\u003e\n\u003ch3\u003eFlow rate and head\u003c\/h3\u003e\n\u003cp\u003eThe FEKA VS750 has a maximum flow rate of 400 litres per minute and a maximum rated head of 7.5 metres.\u003c\/p\u003e\n\u003cp\u003eThese are the two ends of the pump curve rather than a single duty point: at 7.5 metres the flow has fallen to zero, and the full 400 litres per minute is only available with no lift at all. What you actually get sits between the two, where the curve meets the resistance of your pipework. Our \u003ca href=\"\/pages\/hose-pipe-friction-loss-calculator\"\u003epump performance calculator\u003c\/a\u003e works that out for your pipe run, and \u003ca href=\"\/blogs\/news\/how-to-read-a-pump-curve\"\u003ehow to read a pump curve\u003c\/a\u003e explains the principle.\u003c\/p\u003e\n\u003ch3\u003eThe chamber\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRobust high-grade MDPE chamber with a flanged base, 190 litre storage capacity\u003c\/li\u003e\n\u003cli\u003e610mm diameter x 635mm high\u003c\/li\u003e\n\u003cli\u003eOne or two 110mm inlets, drilled on site\u003c\/li\u003e\n\u003cli\u003e2 inch internal pipework, pre-installed, with non-return valve and quick-release coupling\u003c\/li\u003e\n\u003cli\u003eChamber outlet terminates in a 2 inch male BSP thread\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e450mm pedestrian rated cover and frame\u003c\/li\u003e\n\u003cli\u003e1 year warranty \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFull pump performance figures are in the specification table further down this page.\u003c\/p\u003e\n\u003ch3\u003eInstallation and discharge\u003c\/h3\u003e\n\u003cp\u003eCan be installed internally or externally. Depending on the desired installation, these chambers are often connected with fixed PVC delivery pipe, or with suction and delivery hose, matched to the outlet size. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSupplied as a complete plug and play unit, ready for installation. Some on-site work is required, including reconnecting components, drilling entry holes for cables and routing wiring through a suitable conduit. Read our guide to \u003ca href=\"\/blogs\/news\/what-is-a-sump-pump-and-how-do-you-install-one\"\u003einstalling a sump pump\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eImages are indicative only. Photographs may show optional extras, accessories or pipework that are not included in this listing, and the chamber is shown cut open in some images to reveal the internal components. Your chamber is supplied whole. Please refer to the specification and the list of what is included above.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOptions\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecessed cover, sealed and locking:\u003c\/strong\u003e recommended for internal use and for any foul installation. Factory fitted single neoprene seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant: design and installation is site specific\u003c\/h3\u003e\n\u003cp\u003ePump station design and installation is site specific. You should always consult a suitably qualified engineer to determine the correct configuration and installation method for your application, and a qualified electrician for the electrical connection.\u003c\/p\u003e\n\u003cp\u003eInstalling or altering foul drainage in England falls under Building Regulations, and Approved Document H is the guidance used to demonstrate compliance, including sizing the chamber around the number of people served. See \u003ca href=\"\/blogs\/news\/sewage-pump-building-regulations\"\u003esewage pumps and Building Regulations explained\u003c\/a\u003e, and confirm the position for your project with your local building control body.\u003c\/p\u003e\n\u003cp\u003eWe supply equipment. We do not provide site-specific design or installation advice over the phone. Where a project needs calculations, a specification or a design, see our \u003ca href=\"\/pages\/engineering-review\"\u003eengineering review service\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eRelated reading\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/avoiding-common-sump-pump-mistakes-we-see-these-a-lot\"\u003eFive sump pump mistakes we see often\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/blogs\/news\/what-is-a-sump-pump-and-how-do-you-install-one\"\u003eWhat is a sump pump and how do you install one\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Flood Protection Solutions","offers":[{"title":"Sump Foul with Standard Polypropylene Circular Cover","offer_id":55214041268603,"sku":"FPS-IGZFEKA-FOUL-STD","price":725.0,"currency_code":"GBP","in_stock":true},{"title":"Sump Foul with Recessed Sealed \u0026 Locking Cover","offer_id":55214041399675,"sku":"FPS-IGZFEKA-FOUL-RLC","price":925.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/MICROFEKA.jpg?v=1742830188"},{"product_id":"evak-hippo-200-sewage-pump-15m-head-lift-50mm-outlet-50-200","title":"Evak Hippo 200 Sewage Pump (15m Head Lift, 50mm Outlet) DN50-200","description":"\u003ch2\u003eHippo 200 Submersible Dirty Water \u0026amp; Sewage Pump (230V \u0026amp; 400V)\u003c\/h2\u003e\n\u003ch3\u003eWhy Choose the Hippo 200?\u003c\/h3\u003e\n\u003cp\u003eThe Hippo 200 is a heavy‑duty submersible sewage and dirty water pump designed for more demanding domestic and light‑commercial applications. Offering higher flow and head performance than the Hippo 100, it delivers dependable solids handling and robust construction without the complexity or cost of grinder or cutter pumps.\u003c\/p\u003e\n\u003cp\u003eIdeal where greater pumping capacity is required, the Hippo 200 provides a practical, no‑nonsense solution for foul water and sewage systems.\u003c\/p\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003cp\u003eThe Hippo 200 is suitable for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDomestic sewage pumping stations\u003c\/li\u003e\n\u003cli\u003eSeptic tanks and cesspits\u003c\/li\u003e\n\u003cli\u003eDirty water and wastewater chambers\u003c\/li\u003e\n\u003cli\u003eLight commercial installations\u003c\/li\u003e\n\u003cli\u003eSite drainage and utility pumping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe recessed vortex impeller allows the pump to handle sewage and solids confidently while reducing the risk of blockages.\u003c\/p\u003e\n\u003ch3\u003eSolids Handling \u0026amp; Pump Performance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHandles solids up to \u003cstrong\u003e50mm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecessed vortex impeller for improved anti‑clog performance\u003c\/li\u003e\n\u003cli\u003eMaximum flow rate: \u003cstrong\u003eup to 660 litres per minute\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum head: \u003cstrong\u003eup to 15 metres\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis higher performance profile makes the Hippo 200 well suited to larger domestic systems and installations requiring increased lift or flow capacity.\u003c\/p\u003e\n\u003ch3\u003ePower Supply \u0026amp; Model Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e230V single‑phase – automatic or manual (auto has pendant float switch as standard)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e400V three‑phase – manual – can be used with a separate float switch\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOperating Depth \u0026amp; Temperature\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFully submersible to \u003cstrong\u003e10 metres\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum liquid temperature: \u003cstrong\u003e40°C\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese limits comfortably cover typical domestic sewage conditions and most pumping chamber depths.\u003c\/p\u003e\n\u003ch3\u003eDesign, Construction \u0026amp; Reliability\u003c\/h3\u003e\n\u003cp\u003eBuilt for arduous environments, the Hippo 200 features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCast iron and stainless steel construction\u003c\/li\u003e\n\u003cli\u003eDouble mechanical seal (Ca\/Ce + SiC\/SiC)\u003c\/li\u003e\n\u003cli\u003eOil bath with oil seal for enhanced motor protection\u003c\/li\u003e\n\u003cli\u003eThermal protection on single‑phase models\u003c\/li\u003e\n\u003cli\u003eOverload protection on three‑phase models\u003c\/li\u003e\n\u003cli\u003eSupplied with \u003cstrong\u003e10m H07RN‑F heavy‑duty submersible power cable\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDespite its solid construction, the pump weighs approximately \u003cstrong\u003e26kg\u003c\/strong\u003e, making installation and servicing straightforward.\u003c\/p\u003e\n\u003ch3\u003eHorizontal or Vertical Discharge Options\u003c\/h3\u003e\n\u003cp\u003eThe Hippo 200 can be supplied with horizontal or vertical discharge outlets, allowing easier integration into existing pipework layouts and pumping chambers.\u003c\/p\u003e\n\u003ch3\u003eAn Affordable, Practical Upgrade\u003c\/h3\u003e\n\u003cp\u003eThe Hippo 200 offers excellent value for money where higher performance is required. It delivers the increased flow and head many installations need without stepping up to expensive commercial grinder or cutter pumps that are often unnecessary for domestic use.\u003c\/p\u003e\n\u003cp\u003eIf you need a dependable, higher‑capacity submersible sewage pump with strong solids handling and proven construction, the Hippo 200 is a practical and cost‑effective choice.\u003c\/p\u003e\n\u003ch3\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Hippo 200 Submersible Sewage Pump\u003c\/li\u003e\n\u003cli\u003e1 × 10m heavy‑duty rubber power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e the hosetail connector is not included.\u003cbr\u003e\u003cem\u003eImages are indicative and may not represent the exact model supplied.\u003c\/em\u003e\u003c\/p\u003e","brand":"EVAK","offers":[{"title":"Hippo 200 - 230v Manual (3 pin Domestic Plug) \/ Vertical","offer_id":56005173117307,"sku":"EVK-HIP200-230-M","price":499.17,"currency_code":"GBP","in_stock":false},{"title":"Hippo 200 - 230v Manual (3 pin Domestic Plug) \/ Horizontal","offer_id":56005173150075,"sku":"EVK-HIP200-230-M","price":499.17,"currency_code":"GBP","in_stock":false},{"title":"Hippo 200 - 230v Auto (3 pin Domestic Plug) \/ Vertical","offer_id":56005173182843,"sku":"EVK-HIP200-230-A","price":499.17,"currency_code":"GBP","in_stock":false},{"title":"Hippo 200 - 230v Auto (3 pin Domestic Plug) \/ Horizontal","offer_id":56005173215611,"sku":"EVK-HIP200-230-A","price":499.17,"currency_code":"GBP","in_stock":false},{"title":"Hippo 200 - 400v Manual (3 Phase) \/ Vertical","offer_id":56005173248379,"sku":"EVK-HIP200-400-M","price":499.17,"currency_code":"GBP","in_stock":false},{"title":"Hippo 200 - 400v Manual (3 Phase) \/ Horizontal","offer_id":56005173281147,"sku":"EVK-HIP200-400-M","price":499.17,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/evak-hippo-100-sewage-pump-choose-model-hippo-50-400v-manual-7463-p.jpg?v=1706200462"},{"product_id":"evak-hippo-75-sewage-pump","title":"Evak Hippo 75 Sewage Pump (9m Head Lift) DN50-75","description":"\u003ch2 class=\"MsoNormal\"\u003eEvak Hippo 75 Submersible Water Pump – Heavy‑Duty Drainage \u0026amp; Sewage Applications\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Evak Hippo 75 is a heavy‑duty submersible sewage and drainage pump designed specifically to handle foul water and sewage applications.. Featuring a vortex impeller with full free passage, the Hippo 75 is capable of handling solids‑laden water, making it ideal for construction, utilities, wastewater and emergency drainage applications where reliability is essential. Automatic float switch variants (110 V or 230 V) and manual 400 V (3 phase) option, it gives you flexible power options.\u003c\/p\u003e\n\u003ch3\u003eWhat is the Evak Hippo 75 pump used for?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConstruction site drainage and dewatering\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSewage and wastewater pumping\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFlood and emergency water removal\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRainwater and surface water transfer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUtility and infrastructure maintenance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeavy‑duty domestic and professional applications\u003c\/li\u003e\n\u003cli\u003eSuited for tough environments, whether basement sumps or sewage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConstruction and Durability\u003c\/h3\u003e\n\u003cp\u003eThe Evak Hippo 75 is built for long‑term, heavy‑duty operation. It features a stainless steel motor housing combined with a cast iron pump casing for excellent strength and wear resistance. A vortex impeller design allows 50mm solids to pass freely, reducing clogging and downtime. The pump is fitted with a high‑quality Eagle Burgmann double mechanical seal (carbon\/ceramic upper and silicon carbide lower) to ensure durability and reliable sealing in harsh environments. Thermal and overload protection is included with this pump.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the Evak Hippo 75?\u003c\/h3\u003e\n\u003cp\u003eThe Hippo 75 is an excellent choice for contractors and operators who need a robust, submersible pump for dirty water and sewage. Its full free‑passage vortex impeller, durable materials and professional‑grade sealing make it a dependable alternative to premium brands, offering strong performance and long service life in demanding applications. This model offers excellent value. A pump that handles the needs of most household sewage applications without moving to more expensive commercial-grade cutter\/grinder units.\u003c\/p\u003e\n\u003ch3\u003eOperational Details\u003c\/h3\u003e\n\u003cp\u003eMax Flow Rate: 420Litres\/m\u003cbr\u003eHead: 9m\u003cbr\u003ePump type: Submersible sewage \/ drainage pump\u003cbr\u003eImpeller type: Vortex impeller\u003cbr\u003ePower output: 0.75 HP \/ 0.55 kW\u003cbr\u003eVoltage options: Single‑phase 230V, 110V or 400\u003cbr\u003eMaximum liquid temperature: 0 – 40°C\u003cbr\u003eMaximum submersion depth: 10 metres\u003cbr\u003eDischarge size: 2\" (50mm) PT inner thread\u003cbr\u003eMaximum free passage (solids handling): 50mm\u003c\/p\u003e\n\u003cp\u003eHorizontal or Vertical discharge options available\u003c\/p\u003e\n\u003cp\u003eIf you need greater flow capacity or a higher head, the larger \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/evak-hippo-100-sewage-pump\"\u003eEvak Hippo 100 Sewage Pump (11m Head Lift)\u003c\/a\u003e is a suitable upgrade.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Evak Hippo 75 Pump\u003c\/li\u003e\n\u003cli\u003e1x 10m Heavy duty rubber power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePlease note\u003c\/em\u003e\u003c\/strong\u003e, the hosetail connector is not included. Images are indicative only.\u003c\/p\u003e","brand":"EVAK","offers":[{"title":"Hippo 75 - 110v Auto (Industrial) \/ Vertical","offer_id":56200631484795,"sku":"EVK-HIP75-110-A","price":307.5,"currency_code":"GBP","in_stock":false},{"title":"Hippo 75 - 110v Auto (Industrial) \/ Horizontal","offer_id":56200631517563,"sku":"EVK-HIP75-110-A","price":307.5,"currency_code":"GBP","in_stock":false},{"title":"Hippo 75 - 230v Auto (3 Pin Domestic Plug) \/ Vertical","offer_id":56200631550331,"sku":"EVK-HIP75-230-A","price":307.5,"currency_code":"GBP","in_stock":false},{"title":"Hippo 75 - 230v Auto (3 Pin Domestic Plug) \/ Horizontal","offer_id":56200631583099,"sku":"EVK-HIP75-230-A","price":307.5,"currency_code":"GBP","in_stock":false},{"title":"Hippo 75 - 400v Manual (3 Phase) \/ Vertical","offer_id":56200631615867,"sku":"EVK-HIP75-400-M","price":307.5,"currency_code":"GBP","in_stock":false},{"title":"Hippo 75 - 400v Manual (3 Phase) \/ Horizontal","offer_id":56200631648635,"sku":"EVK-HIP75-400-M","price":307.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Evak_Hippo_75_Sewage_and_Foul_Water_Pump_2_c5b6ae62-13a5-4cbb-85a3-37bf7fbdee59.jpg?v=1775740516"},{"product_id":"speroni-kpm-industrial-peripheral-pump","title":"Speroni KP(M) Peripheral Pump | Cast Iron Light Circulation \u0026 Boosting","description":"\u003cp class=\"FirstParagraph\"\u003e\u003cstrong\u003e\u003cspan lang=\"EN-US\"\u003eCast iron peripheral pump for light industrial circulation and boosting.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/speroni-pumps\" rel=\"noopener\" target=\"_blank\"\u003eSperoni Pumps\u003c\/a\u003e KP(M) range are cast iron peripheral pumps for light industrial circulation and boosting applications. Peripheral pumps are small, compact, and produce high head from modest motors. They are a common pump choice for light industrial loops, boiler feed from stored water, and any application where you need pressure more than you need flow.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThis listing covers the two 230V single-phase models: KPM50 (0.37kW) and KPM80 (0.6kW). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eThe 400V three-phase equivalents (KP50 and KP80) are supplied to the same specification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan lang=\"EN-US\"\u003eAll models have a 1\" inlet and 1\" outlet.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003ca name=\"where-this-pump-is-used-5\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eWhere the Speroni KP and KPM Pumps are Used\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-5;\"\u003e\u003cspan lang=\"EN-US\"\u003ePressure boosting from a stored water tank (non-potable use). \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-5;\"\u003e\u003cspan lang=\"EN-US\"\u003eLight industrial circulation loops. \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-5;\"\u003e\u003cspan lang=\"EN-US\"\u003eBoiler feed from stored water (not direct mains). \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-5;\"\u003e\u003cspan lang=\"EN-US\"\u003eSmall washdown applications. \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-5;\"\u003e\u003cspan lang=\"EN-US\"\u003eNon-potable welfare units and mobile accommodation.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-5;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe KPM is not self-priming. The water source must be above the pump, or the suction line must be primed with a foot valve. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoBodyText\"\u003e\u003cstrong\u003e\u003cspan style=\"mso-bookmark: where-this-pump-is-used-5;\"\u003e\u003cspan lang=\"EN-US\"\u003eFor applications where the pump sits above the water source, the AKM60 is the self-priming equivalent.\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca name=\"choosing-between-kpm50-and-kpm80\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eChoosing Between KP50, KPM50, KP80 and KPM80\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAn M at the end of the model name means 230V single-phase \u003cstrong\u003eKPM50\u003c\/strong\u003e, \u003cstrong\u003eKPM80\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eNo M means 400V three-phase \u003cstrong\u003eKP50 \u003c\/strong\u003eand \u003cstrong\u003eKP80\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: choosing-between-kpm50-and-kpm80;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe KP(M)80 is the more common specification.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: choosing-between-kpm50-and-kpm80;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe KP(M)50 is for smaller applications or where only light duty is required.\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"mso-bookmark: choosing-between-kpm50-and-kpm80;\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003ca name=\"how-kpm-differs-from-kfm\"\u003e\u003c\/a\u003e\u003c\/h3\u003e\n\u003ch3\u003eKF(M) or KP(M)?\u003c\/h3\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/floodandwaterpumps.co.uk\/products\/speroni-kpm-industrial-peripheral-pump?utm_source=copyToPasteBoard\u0026amp;utm_medium=product-links\u0026amp;utm_content=web\" target=\"_blank\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBoth are Speroni cast iron peripheral pumps with similar flow and head. Choose the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/speroni-kpm-industrial-peripheral-pump\"\u003eKP(M)\u003c\/a\u003e as the cost-effective option for general light industrial circulation and boosting. Choose the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/speroni-kfm-industrial-peripheral-pump\"\u003eKF(M)\u003c\/a\u003e, with its brass pump body cover, where the pump runs harder or feeds a boiler and you want the more durable industrial build.\u003c\/p\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cstrong\u003e\u003cspan style=\"mso-bookmark: how-kpm-differs-from-kfm;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe difference is the pump body design. \u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: how-kpm-differs-from-kfm;\"\u003e\u003cspan lang=\"EN-US\"\u003eThe KPM has a simpler internal layout and is often the cost-effective choice for general use.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"FirstParagraph\"\u003eThe KFM has a brass pump body cover and is more common in industrial and boiler feed applications. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\n\u003ca name=\"optional-accessories-3\"\u003e\u003c\/a\u003e\u003cspan lang=\"EN-US\"\u003eOptional Accessories\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan style=\"mso-bookmark: optional-accessories-3;\"\u003e\u003cspan lang=\"EN-US\"\u003eA pressure controller adds dry-run protection and automatic start\/stop on demand.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan lang=\"EN-US\"\u003eImportant: WRAS Approval\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp class=\"FirstParagraph\"\u003e\u003cspan lang=\"EN-US\"\u003eThis pump is not WRAS approved and is not for drinking water supply. It is suitable for irrigation, sprinklers, fire systems, rainwater harvesting, cooling loops, and industrial or agricultural water.\u003c\/span\u003e\u003c\/p\u003e","brand":"Speroni","offers":[{"title":"KPM50 230V","offer_id":56216669913467,"sku":"19-15-1018","price":79.17,"currency_code":"GBP","in_stock":false},{"title":"KP50 400V","offer_id":56216669946235,"sku":"19-15-1027","price":79.17,"currency_code":"GBP","in_stock":true},{"title":"KPM80 230V","offer_id":56216669979003,"sku":"19-15-1080","price":115.83,"currency_code":"GBP","in_stock":true},{"title":"KP80 400V","offer_id":56216670011771,"sku":"19-15-1215","price":115.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/speroni-kf-m-kp-m-industrial-peripheral-pump-choose-model-kf2-8028-p.jpg?v=1704966899"},{"product_id":"evak-residox-400-automatic-puddle-pump","title":"EVAK Residox 400 Automatic Sensor Puddle Pump | 213 L\/min","description":"\u003ch2 class=\"MsoNormal\"\u003eEVAK Residox 400 Automatic Puddle Pump | Floor-Level Sensor | 230V\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe EVAK Residox 400 Automatic combines the Residox 400 puddle pump with an integrated floor-level electronic sensor, providing unattended drainage in basements, sump pits, lift shafts, plant rooms and any defined area where water periodically collects.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhy this is preferable to a float switch\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eMost automatic drainage pumps use a tethered float switch, which requires several centimetres of water to swing freely. Float switches are not well suited to puddle-pumping, where the objective is to remove water down to floor level. The Residox Automatic uses a small electronic sensor probe, hard-wired into the pump, which sits flat on the ground next to it. The probe detects water at 3 mm (±1 mm) above floor level, well below the level any pendant float switch could reach.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNote that the operating cycle of this automatic pump is governed by the sensor, not the pump itself. The Residox 400 is mechanically capable of pumping water down to approximately 1 mm above the floor (as in the manual version), but in automatic operation the sensor will signal the pump to stop once the water level falls below the 3 mm trigger point. For jobs requiring water to be removed to the lowest possible level in a single pass, the manual Residox 400 is the more appropriate choice.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003ePlug in and run, no control panel required\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe sensor is wired into the pump as a single unit, so no control panel, piggyback plug or external wiring is required. The pump plugs into a standard 230V mains socket and the sensor controls operation. Both the pump and the sensor probe are rated IP68 and fully submersible.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe automatic version is only available in 230V.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eAdjustable Sensor Delay\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe two delay times are one of the most significant practical advantages of this pump over float-switch alternatives.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe \u003cstrong\u003estart delay\u003c\/strong\u003e (factory setting 5 seconds) requires the sensor to detect water continuously for the duration of the delay before the pump activates. Brief water events such as a splash, a momentary drip, or run-off from cleaning will dissipate before the delay expires, and the pump will not start. This prevents unnecessary cycling and reduces motor wear from reacting to non-events.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe \u003cstrong\u003estop delay\u003c\/strong\u003e (factory setting 30 seconds) keeps the pump running for the duration of the delay after the water level has fallen below the sensor. Without this delay, the pump would shut off the moment the water cleared the sensor and immediately restart as more water entered, producing a high frequency of short on\/off cycles. Rapid cycling is one of the most common causes of premature motor failure in automatic pumps. The stop delay allows the pump to complete each pumping cycle fully before resting.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eBoth delays are adjustable from 1 to 120 seconds using the supplied magnetic key, held against the side of the sensor housing.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eImportant: do not run dry\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eSetting the stop delay too long will leave the pump running after the water has cleared, which damages the seals and shortens motor life. The factory 30-second setting is suitable for most installations. Increase the stop delay only when the pump has demonstrably more water to clear at that point in the cycle. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIt should be set to suit the operating environment.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eSuitable applications\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e•    Basements, cellars and lift shafts with known water-ingress problems\u003cbr\u003e•    Plant rooms and utility areas where unmonitored leaks pose a flood risk\u003cbr\u003e•    Sump pits that fill periodically and require draining without a permanent float\u003cbr\u003e•    Facilities management sites where attending every drain-down is impractical\u003cbr\u003e•    Permanent passive flood defence\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eLess suitable for\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eFast-flowing, turbulent or intermittent water (such as surface rainwater in an exposed area) can cause excessive cycling even with the delays in place. In these situations, the manual Residox or a system with additional level controls is more appropriate.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eBuild and capacity\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Residox 400 Automatic shares the manual model's build standard: cast iron pump housing, stainless steel outer case and handle, Hytrel vortex impeller, 2 mm free passage, and rubberised NBR base. The pump delivers 213 litres per minute with an 11-metre head. No priming is required (unlike a Tsurumi LSC, which needs water poured in before first use).\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe automatic version is supplied as a 230V unit only. For 110V site use, the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/evak-residox-puddle-sucker-pump?_pos=1\u0026amp;_sid=37f7494be\u0026amp;_ss=r\u0026amp;variant=47653206688063\" title=\"Evak Residox 400 Manual Puddle Pump\"\u003emanual Residox 400\u003c\/a\u003e with a separately fitted control system is the appropriate alternative.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eKey Features\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e✔ Integrated floor-level sensor, hard-wired into the pump \u003cbr\u003e✔ Detects water at 3 mm (±1 mm) above floor \u003cbr\u003e✔ Adjustable delays prevent rapid on\/off cycling, protecting the motor \u003cbr\u003e✔ Start delay 1 to 120 seconds (factory 5) \u003cbr\u003e✔ Stop delay 1 to 120 seconds (factory 30) \u003cbr\u003e✔ Plug straight into 230V mains, no control panel required \u003cbr\u003e✔ Pump and sensor both rated IP68 \u003cbr\u003e✔ Full Residox build: cast iron, stainless steel, Hytrel impeller \u003cbr\u003e✔ 250 l\/min flow, 11 m head, 2 mm free passage \u003cbr\u003e✔ 230V only, 1-year manufacturer's warranty\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e✅ 1 x EVAK Residox 400 Automatic Puddle Pump with integrated floor-level sensor \u003cbr\u003e✅ 1 x Magnetic key for delay-time adjustment \u003cbr\u003e✅ 1 x 10m heavy-duty rubber power cable \u003cbr\u003e✅ 1 x 2 inch (50mm) hose tail\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eOptional: add a 90° elbow hose tail to prevent hose kinking and maintain optimum flow.\u003cbr\u003e\u003c\/p\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e","brand":"EVAK","offers":[{"title":"Default Title","offer_id":56223205884283,"sku":"EVK-RES400-230-A","price":462.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Evak_Residox_Low_Suction_water_pump_with_automatic_sensor.jpg?v=1785931360"},{"product_id":"evak-residox-750-powerful-automatic-puddle-pump","title":"EVAK Residox 750 Automatic Sensor Puddle Pump | 330 L\/min","description":"\u003ch2 class=\"MsoNormal\"\u003eEVAK Residox 750 Automatic Puddle Pump | High Flow Sensor Pump | 230V\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe EVAK Residox 750 Automatic pairs the higher-output Residox 750 with an integrated floor-level electronic sensor, providing unattended drainage in larger areas, deeper sumps, and applications where water has to be moved over distance or pumped uphill without an operator present. It offers the same convenience as the 400 Automatic, with significantly more pumping capacity behind it.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhen to choose the 750 Automatic over the 400 Automatic\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe 750 delivers 330 l\/min and a 16-metre head, against 250 l\/min and 11 m on the 400.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e The 750 Automatic is the appropriate choice when:\u003cbr\u003e•    The sump or area being drained is larger or deeper\u003cbr\u003e•    Water has to be discharged uphill to a drain, manhole or external chamber\u003cbr\u003e•    The horizontal run from pump to discharge point is long\u003cbr\u003e•    Faster drain-down is needed (for example, a lift shaft that must clear quickly)\u003cbr\u003e•    The installation requires headroom for worst-case flood events\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eFor smaller residential basements and standard plant-room duties, the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/evak-residox-400-automatic-puddle-pump?_pos=3\u0026amp;_sid=6c4482383\u0026amp;_ss=r\" title=\"Evak Residox 400 Automatic Puddle Pump\"\u003eResidox 400 Automatic\u003c\/a\u003e is usually sufficient.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhy this is preferable to a float switch\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eFloat switches require several centimetres of water to swing freely, which makes them poorly suited to puddle-pumping work. The Residox Automatic uses a small electronic sensor probe, hard-wired into the pump, which sits flat on the ground next to it. The probe detects water at 3 mm (±1 mm) above floor level, well below the level any float switch could reach.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNote that the operating cycle of an automatic pump is governed by the sensor, not the pump itself. The Residox 750 is mechanically capable of pumping water down to approximately 1 mm above the floor (as in the manual version), but in automatic operation the sensor will signal the pump to stop once the water level falls below the 3 mm trigger point. For jobs requiring water to be removed to the lowest possible level in a single pass, the manual Residox 750 is the more appropriate choice.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003ePlug in and run, no control panel required\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe sensor is wired into the pump as a single unit, so no control panel, piggyback plug or external wiring is required. The pump plugs into a standard 230V mains socket and is ready to operate. Both the pump and the sensor probe are rated IP68 and fully submersible.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eAdjustable Sensor Delay\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe two delay times are one of the most significant practical advantages of this pump over float-switch alternatives.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe \u003cstrong\u003estart delay\u003c\/strong\u003e (factory setting 5 seconds) requires the sensor to detect water continuously for the duration of the delay before the pump activates. Brief water events such as a splash, a momentary drip, or run-off from cleaning will dissipate before the delay expires, and the pump will not start. This prevents unnecessary cycling and reduces motor wear from reacting to non-events.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe \u003cstrong\u003estop delay\u003c\/strong\u003e (factory setting 30 seconds) keeps the pump running for the duration of the delay after the water level has fallen below the sensor. Without this delay, the pump would shut off the moment the water cleared the sensor and immediately restart as more water entered, producing a high frequency of short on\/off cycles. Rapid cycling is one of the most common causes of premature motor failure in automatic pumps. The stop delay allows the pump to complete each pumping cycle fully before resting.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eBoth delays are adjustable from 1 to 120 seconds using the supplied magnetic key, held against the side of the sensor housing.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eImportant: do not run dry\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eSetting the stop delay too long will leave the pump running after the water has cleared, which damages the seals and shortens motor life. The factory 30-second setting is suitable for most installations. Increase the stop delay only when the pump has demonstrably more water to clear at that point in the cycle.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eSuitable applications\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e•    Large basements and warehouse cellars with known ingress issues\u003cbr\u003e•    Deep sump pits in facilities management and industrial sites\u003cbr\u003e•    Lift shafts that need fast, automatic drain-down\u003cbr\u003e•    Plant rooms and utility areas with longer discharge runs\u003cbr\u003e•    Permanent passive flood defence in commercial and B2B settings\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eLess suitable for\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eFast-flowing, turbulent or intermittent surface water (such as exposed external drainage where rainfall causes erratic level changes) can cause excessive cycling even with the delays in place. In these situations, the manual Residox 750 or a system with additional level controls is more appropriate.\u003c\/p\u003e\n\u003ch3\u003eBuy the Evak Residox 750 as a basement flood kit\u003c\/h3\u003e\n\u003cdiv style=\"margin: 28px 0; padding: 20px 24px; background: #F0EDE5; border-left: 4px solid #283583; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong\u003eOn an automatic pump in a basement, the non-return valve matters as much as the pump.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eThe \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/high-flow-automatic-basement-flood-pump-kit\"\u003eHigh-Flow Automatic Basement Flood Pump Kit\u003c\/a\u003e adds \u003cstrong\u003e10m of 50mm reinforced hose\u003c\/strong\u003e, a \u003cstrong\u003e50mm brass non-return valve\u003c\/strong\u003e and a clip. Without the valve, the column of water standing in the hose runs back into the sump every time the pump cuts out, which re-trips the float and works the motor for nothing. \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/high-flow-automatic-basement-flood-pump-kit\"\u003e\u003cstrong\u003eView the kit ›\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"MsoNormal\"\u003eBuild, capacity and electrics\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eFull Residox build: cast iron pump housing, stainless steel outer case and handle, Hytrel vortex impeller, 2 mm free passage, and rubberised NBR base. The pump delivers 330 litres per minute with a 16-metre head. No priming is required (unlike a Tsurumi LSC, which needs water poured in before first use).\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe automatic version is supplied as a 230V unit only. For 110V site use, the manual Residox 750 with a separately fitted control system is the appropriate alternative.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eKey Features\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e✔ Integrated floor-level sensor, hard-wired into the pump \u003cbr\u003e✔ Detects water at 3 mm (±1 mm) above floor \u003cbr\u003e✔ Higher flow and head than the 400 Automatic (330 l\/min, 16 m) \u003cbr\u003e✔ Adjustable delays prevent rapid on\/off cycling, protecting the motor \u003cbr\u003e✔ Start delay 1 to 120 seconds (factory 5) \u003cbr\u003e✔ Stop delay 1 to 120 seconds (factory 30) \u003cbr\u003e✔ Plug straight into 230V mains, no control panel required \u003cbr\u003e✔ Pump and sensor both rated IP68 \u003cbr\u003e✔ Full Residox build: cast iron, stainless steel, Hytrel impeller \u003cbr\u003e✔ 2 mm free passage, rubberised NBR base \u003cbr\u003e✔ 230V only, 1-year manufacturer's warranty\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e✅ 1 x EVAK Residox 750 Automatic Puddle Pump with integrated floor-level sensor \u003cbr\u003e✅ 1 x Magnetic key for delay-time adjustment \u003cbr\u003e✅ 1 x 10m heavy-duty rubber power cable \u003cbr\u003e✅ 1 x 2 inch (50mm) hose tail\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eOptional: add a 90° elbow hose tail to prevent hose kinking and maintain optimum flow.\u003cbr\u003e\u003c\/p\u003e\n\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\ntr th, tr td {\n    border: 1px solid #e6e6e6;\n}\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e","brand":"EVAK","offers":[{"title":"Default Title","offer_id":56223603425659,"sku":"EVK-RES750-230-A","price":525.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Evak_Residox_Low_Suction_water_pump_with_automatic_sensor.jpg?v=1785931360"},{"product_id":"evak-residox-750-powerful-puddle-sucker-pumps-high-flow-flood-pump","title":"EVAK Residox 750 Manual Puddle Pump | 330 L\/min, 16m Head","description":"\u003ch2 class=\"MsoNormal\"\u003eEVAK Residox 750 Manual Puddle Pump | High Flow, Pumps to 1 mm | 110V \u0026amp; 230V\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThe EVAK Residox 750 is the higher-output ultra-low-level manual puddle pump in the Residox range, built for larger flood areas, longer hose runs, and applications where water needs to be moved over distance or discharged uphill. \u003cstrong\u003eIt is the highest flow rate puddle pump in our range.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIt shares the construction and low-level pumping characteristics of the 400, with significantly more capacity behind it.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhen to choose the 750 over the 400\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe 750 is the appropriate choice when flow rate matters more than cost. It delivers 330 litres per minute and a maximum head of 16-metres, against 250 l\/min and 11 m on the Residox 400, clearing larger volumes faster and pumping further from the source. Typical applications include:\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e•    Larger basement, cellar or warehouse floods\u003cbr\u003e•    Pumping uphill or over long horizontal distances to a drain\u003cbr\u003e•    Faster recovery times on flood-response callouts\u003cbr\u003e•    Hire fleets requiring one pump to cover a wider range of jobs\u003cbr\u003e•    Construction and site drainage where flow rate is the limiting factor\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eFor straightforward domestic flooding and standard nuisance water, the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/evak-residox-puddle-sucker-pump?_pos=1\u0026amp;_psq=res\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"Evak Residox 400 Puddle Pump\"\u003eResidox 400\u003c\/a\u003e is usually sufficient.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eUltra-low-level pumping\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe Residox is designed for jobs that conventional submersible pumps cannot finish. Where a standard pump stops drawing once the water drops below its inlet, the Residox continues pumping down to approximately 1 mm above the floor, leaving surfaces almost dry. That makes it well suited to flood recovery, basement clearance and any application where minimal residual water is the priority.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eBuilt for demanding use\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eThe 750 shares the Residox build standard: cast iron pump housing, stainless steel outer case and handle, alloy motor and seal casing, and a Hytrel vortex impeller. The 2 mm free passage handles dirty, debris-laden water typical of flood conditions. The rubberised NBR suction base protects tiles, concrete slabs and other finished surfaces.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eNo priming needed\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eUnlike some other puddle pumps (such as the Tsurumi LSC range), the Residox does not need to be primed with water poured into the pump body. Place it down in the water to be removed, switch it on, and pump. The pump is fully submersible and should always be operated submerged or with water present at the suction base, and should not be left to run dry.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003e110V or 230V\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003eChoose 110V for site use with a transformer, or 230V for domestic and general-purpose applications.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eKey Features\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e✔ Pumps down to approximately 1 mm above floor level \u003cbr\u003e✔ Higher flow and head than the Residox 400 (330 l\/min, 16 m) \u003cbr\u003e✔ Manual operation, operator-controlled \u003cbr\u003e✔ Stainless steel construction with cast iron pump housing \u003cbr\u003e✔ Hytrel vortex impeller, abrasion resistant \u003cbr\u003e✔ 2 mm free passage for dirty water \u003cbr\u003e✔ Surface-safe rubberised NBR base \u003cbr\u003e✔ No priming required \u003cbr\u003e✔ Available in 110V or 230V \u003cbr\u003e✔ 1-year manufacturer's warranty\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e✅ 1 x EVAK Residox 750 Manual Puddle Pump \u003cbr\u003e✅ 1 x 10m heavy-duty rubber power cable \u003cbr\u003e✅ 1 x 2 inch (50mm) hose tail\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eOptional: add a 90° elbow hose tail to prevent hose kinking and maintain optimum flow.\u003cbr\u003e\u003c\/p\u003e","brand":"EVAK","offers":[{"title":"Evak Residox 750 230v (3 pin Domestic Plug)","offer_id":56226740830587,"sku":"EVK-RES750-230-M","price":400.0,"currency_code":"GBP","in_stock":true},{"title":"Evak Residox 750 110v (Industrial)","offer_id":56226740863355,"sku":"EVK-RES750-110-M","price":400.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/evak-residox-puddle-sucker-pump-6494-p.jpg?v=1725887151"},{"product_id":"tsurumi-lsc-1-4s-puddle-sucker-pump-automatic","title":"Tsurumi LSC 1.4S Automatic Puddle Sucker Pump | Sensor Controlled","description":"\u003cstyle\u003e\na {\n    text-decoration: none;\n    color: #464feb;\n}\n\ntr th,\ntr td {\n    border: 1px solid #e6e6e6;\n}\n\ntr th {\n    background-color: #f5f5f5;\n}\n\u003c\/style\u003e\n\u003ch2\u003eTsurumi LSC1.4S Automatic Puddle Pump – Sensor-Controlled Low-Level Drainage\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003eThe \u003cstrong\u003eTsurumi LSC1.4S Automatic\u003c\/strong\u003e combines professional puddle-sucker performance with sensor-controlled operation. It is designed for applications where water may return and the pump needs to start and stop automatically without relying on a conventional mechanical float switch.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003eThis makes it particularly well suited to fixed installations, narrow sumps, lift shafts, service pits, construction sites and areas affected by recurring surface-water ingress.\u003c\/p\u003e\n\u003cp\u003eThe pump delivers up to \u003cstrong\u003e170 litres per minute\u003c\/strong\u003e, has a maximum head of \u003cstrong\u003e11 metres\u003c\/strong\u003e and is available with automatic control arrangements for portable or permanent use.\u003c\/p\u003e\n\u003cp\u003eManufactured by \u003cstrong\u003eTsurumi Pumps\u003c\/strong\u003e, the LSC1.4S is supplied with a \u003cstrong\u003e3-year product guarantee\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat is the Tsurumi LSC1.4S Automatic used for?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic control of recurring floodwater\u003c\/li\u003e\n\u003cli\u003eFixed low-level drainage installations\u003c\/li\u003e\n\u003cli\u003eNarrow sumps and restricted spaces\u003c\/li\u003e\n\u003cli\u003eLift shafts and service pits\u003c\/li\u003e\n\u003cli\u003eBasements and plant rooms\u003c\/li\u003e\n\u003cli\u003eConstruction-site water control\u003c\/li\u003e\n\u003cli\u003eUtilities and infrastructure projects\u003c\/li\u003e\n\u003cli\u003eAreas where a conventional float switch cannot operate\u003c\/li\u003e\n\u003cli\u003eUnattended surface-water management\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is the best automatic puddle pump for low-level water?\u003c\/h3\u003e\n\u003cp\u003eThe Tsurumi LSC1.4S Automatic is an excellent choice where automatic operation and very low residual water levels are both required.\u003c\/p\u003e\n\u003cp\u003eUnlike a conventional automatic submersible pump with a large mechanical float, the LSC1.4S can use compact stainless-steel probes to detect water. This allows it to operate in shallow water and restricted spaces where a traditional float switch may not have sufficient room to rise and fall.\u003c\/p\u003e\n\u003cp\u003eIts professional construction and maximum flow rate of 170 litres per minute make it suitable for domestic, commercial and industrial drainage systems.\u003c\/p\u003e\n\u003ch3\u003eHow does the automatic Tsurumi LSC1.4S work?\u003c\/h3\u003e\n\u003cp\u003eThe available automatic control options use stainless-steel probes to detect water and control the pump.\u003c\/p\u003e\n\u003cp\u003eThere are two principal arrangements:\u003c\/p\u003e\n\u003ch4\u003eLSC1.4S with Sensor Switch\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for portable use, narrow sumps and compact fixed installations\u003c\/li\u003e\n\u003cli\u003eUses two stainless-steel sensing probes\u003c\/li\u003e\n\u003cli\u003eStarts automatically when the probes detect water\u003c\/li\u003e\n\u003cli\u003eContinues running for approximately one minute after water drops below the probes\u003c\/li\u003e\n\u003cli\u003eCan achieve an off level as low as approximately 1mm, depending on the area being drained and when fitted with optional extension probes, which can lower the level at which the sensor initially detects water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eLSC1.4S with SwitchH2O and Control Panel\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned primarily for permanent fixed installations\u003c\/li\u003e\n\u003cli\u003eUses separate start, stop and common stainless-steel probes\u003c\/li\u003e\n\u003cli\u003eAllows the operating levels to be set by positioning the probes\u003c\/li\u003e\n\u003cli\u003eIncludes a control panel and probe cable\u003c\/li\u003e\n\u003cli\u003eSuitable for sumps, lift shafts and permanent water-control systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow low does the automatic Tsurumi LSC1.4S pump?\u003c\/h3\u003e\n\u003cp\u003eThe LSC1.4S pump itself is capable of removing water down to approximately \u003cstrong\u003e1mm\u003c\/strong\u003e. The actual automatic stopping level will depend on the selected control arrangement and the position of its sensors or probes.\u003c\/p\u003e\n\u003cp\u003eThe Sensor Switch option can achieve an off level as low as approximately 1mm, depending on the size, shape and condition of the area being drained.\u003c\/p\u003e\n\u003cp\u003eThe SwitchH2O and control-panel system enables automatic pumping down to\u003cspan\u003e circa \u003c\/span\u003e\u003cb\u003e5mm\u003c\/b\u003e, with the exact start and stop levels determined by the installation and positioning of the probes. \u003c\/p\u003e\n\u003ch3\u003eWhat do the optional sensor extension probes do?\u003c\/h3\u003e\n\u003cp\u003eThe optional extension probes are used with the Sensor Switch arrangement. They extend the sensing points closer to the surface being drained, allowing the pump to activate at a lower water level.\u003c\/p\u003e\n\u003cp\u003eThe extension probes do not increase the hydraulic pumping capability of the LSC1.4S. The pump itself is already designed to remove water down to approximately 1mm.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptional\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e170mm sensor extension probes\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eavailable, enabling pump-down to\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ecirca 1mm\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=_kghWAEYQQI\" target=\"_blank\"\u003eWatch the Extension Probe Video here\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/hoses-fittings\/products\/sensor-extension-probes-lsc\" target=\"_blank\"\u003eBuy Sensor Extension Probes here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003eHow it works: When the probes detect water, the pump activates and continues running for one minute after water drops below the probe. If water touches the probe again within that time, it continues running until clear.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eProbe extensions are only available on the Sensor options.\u003c\/p\u003e\n\u003ch3\u003eDoes the automatic LSC1.4S use a float switch?\u003c\/h3\u003e\n\u003cp\u003eNo conventional mechanical float switch is required. The available automatic arrangements use stainless-steel probes to detect water.\u003c\/p\u003e\n\u003cp\u003eThis makes the automatic LSC1.4S particularly useful in \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/blogs\/news\/best-pump-for-narrow-spaces\"\u003enarrow sumps\u003c\/a\u003e, shallow areas and restricted spaces where a tethered or vertical float switch may not have sufficient room to operate reliably.\u003c\/p\u003e\n\u003ch3\u003eCan the Tsurumi LSC1.4S be left to operate automatically?\u003c\/h3\u003e\n\u003cp\u003eYes. The automatic controls are designed to start and stop the pump in response to changing water levels, making the pump suitable for recurring water ingress and installations where an operator will not always be present. As an example, the LSC is popular in automatic guise for \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/blogs\/news\/best-water-pumps-for-lift-shafts-a-buyers-guide\"\u003elift shafts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor permanent or unattended use, the complete installation should be designed appropriately. This includes the electrical supply, discharge route, non-return arrangements, alarm provision and the consequences of pump or power failure.\u003c\/p\u003e\n\u003cp\u003eThe SwitchH2O and control-panel arrangement will generally be the more appropriate option for a permanent fixed installation.\u003c\/p\u003e\n\u003ch3\u003eShould I choose the Sensor Switch or SwitchH2O system?\u003c\/h3\u003e\n\u003ch4 class=\"MsoNormal\"\u003ePortable Use:\u003c\/h4\u003e\n\u003cul type=\"disc\"\u003e\u003c\/ul\u003e\n\u003cp\u003eChoose the \u003cstrong\u003eSensor Switch\u003c\/strong\u003e where you need a compact automatic pump for portable use, shallow water, a narrow sump or an installation that may occasionally need to be moved.\u003c\/p\u003e\n\u003ch4 class=\"MsoNormal\"\u003eFixed Installations:\u003c\/h4\u003e\n\u003cul type=\"disc\"\u003e\u003c\/ul\u003e\n\u003cp\u003eChoose the \u003cstrong\u003eSwitchH2O and control panel\u003c\/strong\u003e for a permanent fixed installation where defined start and stop levels and panel-based control are required.\u003c\/p\u003e\n\u003ch3\u003eHow much water can the automatic LSC1.4S pump?\u003c\/h3\u003e\n\u003cp\u003eThe automatic Tsurumi LSC1.4S delivers a maximum flow rate of up to \u003cstrong\u003e170 litres per minute\u003c\/strong\u003e and has a maximum head of \u003cstrong\u003e11 metres\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe selected automatic control changes when the pump starts and stops, but it does not increase the hydraulic output of the pump.\u003c\/p\u003e\n\u003cp\u003eActual flow will depend on the pumping height, hose diameter, hose length, bends, fittings and other resistance within the discharge arrangement. Maximum flow and maximum head occur at different points on the pump curve.\u003c\/p\u003e\n\u003ch3\u003eCan the automatic LSC1.4S handle floodwater?\u003c\/h3\u003e\n\u003cp\u003eYes. The pump is suitable for drainage water and typical floodwater containing sand, silt and suspended solids up to approximately 5\u003cstrong\u003emm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eIt is not intended for raw sewage, heavily contaminated water or liquids containing large, stringy or fibrous solids.\u003c\/p\u003e\n\u003ch3\u003eDoes the pump prevent water flowing back?\u003c\/h3\u003e\n\u003cp\u003eAn integral non-return valve helps prevent water held within the discharge hose from flowing back through the pump when it stops.\u003c\/p\u003e\n\u003cp\u003eThis supports low-level automatic operation by reducing the amount of discharged water returning to the drained area after each pumping cycle.\u003c\/p\u003e\n\u003ch3\u003eCan the outlet be positioned horizontally or vertically?\u003c\/h3\u003e\n\u003cp\u003eYes. The discharge outlet can be arranged horizontally or vertically to suit the available space and hose route.\u003c\/p\u003e\n\u003cp\u003eThis can reduce hose kinking and is particularly helpful in narrow sumps, lift shafts and other restricted installations.\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"float: none;\" alt=\"Tsurumi LSC1.4S automatic puddle pump horizontal and vertical discharge outlet\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Tsurumi_LSC_1_4.jpg?v=1766919529\"\u003e\u003c\/div\u003e\n\u003ch3\u003eShould I choose the manual or automatic Tsurumi LSC1.4S?\u003c\/h3\u003e\n\u003cp\u003eChoose the \u003cstrong\u003eautomatic LSC1.4S\u003c\/strong\u003e where water levels may rise again and the pump needs to respond without an operator manually switching it on and off.\u003c\/p\u003e\n\u003cp\u003eChoose the \u003cstrong\u003emanual LSC1.4S\u003c\/strong\u003e for temporary flood response, portable drainage and applications where an operator will remain present and control the pump directly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrefer direct manual control?\u003c\/strong\u003e See the \u003ca title=\"Tsurumi LSC1.4S manual puddle sucker pump\" href=\"https:\/\/floodandwaterpumps.co.uk\/products\/tsurumi-lsc1-4s-puddle-sucker-pump\"\u003emanual Tsurumi LSC1.4S puddle sucker pump\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eShould I choose the 110V or 230V model?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e110V:\u003c\/strong\u003e Normally used on construction sites and in professional environments with a suitable 110V centre-tapped transformer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e230V:\u003c\/strong\u003e Suitable for connection to a compatible standard UK domestic or commercial electrical supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlways confirm that the available electrical supply is compatible with the selected pump and automatic control equipment.\u003c\/p\u003e\n\u003ch3\u003eShould I choose a 25mm or 50mm outlet?\u003c\/h3\u003e\n\u003cp\u003eThe automatic LSC1.4S is supplied with a \u003cstrong\u003e25mm outlet as standard\u003c\/strong\u003e. A 50mm outlet option can be selected when ordering.\u003c\/p\u003e\n\u003cp\u003eA larger-diameter hose may reduce friction losses on longer discharge routes. The most suitable outlet size will depend on the hose length, vertical lift, available space and required operating flow.\u003c\/p\u003e\n\u003ch3\u003eConstruction and Build Quality\u003c\/h3\u003e\n\u003cp\u003eThe Tsurumi LSC1.4S is constructed for demanding professional use. It features a pressed-steel outer casing and cast-aluminium pump stand for strength and stability.\u003c\/p\u003e\n\u003cp\u003eWear-resistant components help the pump cope with drainage water containing suspended sand and silt, while the silicon carbide mechanical seal provides durability during repeated use.\u003c\/p\u003e\n\u003cp\u003eIts top-discharge design creates an air and water-cooling route around the motor, supporting extended operation in shallow water and seepage conditions. The pump should not be deliberately operated dry for prolonged periods.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the Tsurumi LSC1.4S Automatic?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic sensor-controlled operation\u003c\/li\u003e\n\u003cli\u003eSensor Switch and fixed-panel control options available\u003c\/li\u003e\n\u003cli\u003ePumps water down to approximately 1mm\u003c\/li\u003e\n\u003cli\u003eNo conventional mechanical float switch required\u003c\/li\u003e\n\u003cli\u003eSuitable for narrow sumps and restricted spaces\u003c\/li\u003e\n\u003cli\u003eMaximum flow rate of 170 litres per minute\u003c\/li\u003e\n\u003cli\u003eMaximum head of 11 metres\u003c\/li\u003e\n\u003cli\u003e480W single-phase motor\u003c\/li\u003e\n\u003cli\u003eHandles suspended solids up to 6mm\u003c\/li\u003e\n\u003cli\u003eHorizontal or vertical discharge arrangement\u003c\/li\u003e\n\u003cli\u003eIntegral non-return valve helps reduce backflow\u003c\/li\u003e\n\u003cli\u003eDesigned for extended operation at low water levels\u003c\/li\u003e\n\u003cli\u003eAvailable in 110V or 230V\u003c\/li\u003e\n\u003cli\u003eChoice of 25mm or 50mm outlet\u003c\/li\u003e\n\u003cli\u003e3-year Tsurumi product guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat’s included?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Tsurumi LSC1.4S puddle sucker pump\u003c\/li\u003e\n\u003cli\u003e1 × 10 metre heavy-duty rubber power cable\u003c\/li\u003e\n\u003cli\u003e1 × hose tail in the selected outlet size\u003c\/li\u003e\n\u003cli\u003eAutomatic sensor or control equipment selected with the product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eLooking for an alternative puddle pump?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigher-powered automatic option:\u003c\/strong\u003e \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/evak-residox-400-automatic-puddle-pump\"\u003eEVAK Residox 400 Automatic puddle pump\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual low-level pumping:\u003c\/strong\u003e \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/tsurumi-lsc1-4s-puddle-sucker-pump\"\u003eTsurumi LSC1.4S Manual puddle sucker pump\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tsurumi Pumps","offers":[{"title":"LSC1.4S c\/w Sensor 230v Auto 25mm Outlet","offer_id":56229833146747,"sku":"10-10-1144","price":729.17,"currency_code":"GBP","in_stock":true},{"title":"LSC1.4S c\/w Sensor 110v Auto 25mm Outlet","offer_id":56229833179515,"sku":"10-10-1222","price":729.17,"currency_code":"GBP","in_stock":true},{"title":"LSC1.4S c\/w H2O \u0026 Panel 230v Auto 25mm Outlet","offer_id":56229833212283,"sku":"10-10-1224","price":787.5,"currency_code":"GBP","in_stock":true},{"title":"LSC1.4S c\/w H2O \u0026 Panel 110v Auto 25mm Outlet","offer_id":56229833245051,"sku":"10-10-1252","price":837.5,"currency_code":"GBP","in_stock":true},{"title":"LSC1.4S c\/w Sensor 230v Auto 50mm Outlet","offer_id":56229833343355,"sku":"10-10-1157","price":740.83,"currency_code":"GBP","in_stock":true},{"title":"LSC1.4S c\/w Sensor 110v Auto 50mm Outlet","offer_id":56229833376123,"sku":"10-10-1057","price":740.83,"currency_code":"GBP","in_stock":true},{"title":"LSC1.4S c\/w H2O \u0026 Panel 230v Auto 50mm Outlet","offer_id":56229833408891,"sku":"10-10-1071","price":804.17,"currency_code":"GBP","in_stock":true},{"title":"LSC1.4S c\/w H2O \u0026 Panel 110v Auto 50mm Outlet","offer_id":56229833441659,"sku":"10-10-1171","price":854.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/LSC1.4Slowlevelfloodwaterpuddlepump_1.jpg?v=1778236165"},{"product_id":"pentair-freeflo-swimming-pool-pump","title":"Pentair Freeflo Pool Pump | Self-Priming, 0.5 to 1.5HP","description":"\u003ch2\u003ePentair Freeflo Pool Pumps: Quiet, Reliable Self Priming Circulation\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003eThe Pentair Freeflo is a high performance, self priming pool pump built for a wide variety of above ground and smaller in ground pools. Its mono block design runs quietly and takes up less space, while the single piece see through Cam and Ramp lid lets you check the large HDPE strainer basket at a glance and clean it in seconds. Thick walled body parts, highly engineered hydraulics and a heavy duty, thermally protected TEFC motor make it rugged and dependable season after season. The Freeflo is available in four single phase power options, so you can match the pump to your pool size, and every model is a drop in replacement for the Swimmey pump series and is backed by a 3 year limited warranty.\u003c\/p\u003e\n\u003ch3\u003eChoose your Freeflo: single phase power options\u003c\/h3\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eSelf priming pump with built in prefilter for swimming pools\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eQuiet mono block design with a compact footprint\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eSingle piece, see through Cam and Ramp lid for easy basket inspection and cleaning\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eLarge, long life HDPE strainer basket that holds plenty of debris\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eHeavy duty, thermally protected TEFC motor, IPX5 rated\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e50mm swivel unions and a 90 degree rotatable discharge for flexible installation\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eFour single phase power options from 0.5HP to 1.5HP\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e3 year limited warranty\u003c\/p\u003e\n\u003ch3\u003eChoose your Freeflo: single phase power options\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003eAll Freeflo single phase pumps share the same quiet, rugged, easy to service design. The only difference is motor power, which determines how much water the pump can move. Use the guide below to pick the right option for your pool, or get in touch and we will help you choose.\u003c\/p\u003e\n\u003c!-- Pentair Freeflo - power options chart (brand colours from floodandwaterpumps.co.uk) --\u003e\n\u003cstyle\u003e\n  .fawp-opt{\n    --ink:#0C1118; --cream:#FBF9F3; --line:#E2DED2;\n    --orange:#E8542B; --blue:#34669A; --indigo:#283583; --grey:#8A9099;\n    font-family:Arial,Helvetica,sans-serif; color:var(--ink); max-width:960px; margin:0 auto;\n  }\n  .fawp-opt *{box-sizing:border-box;}\n  .fawp-opt h3{font-size:1.35rem; font-weight:700; margin:1.6rem 0 .35rem;}\n  .fawp-opt h3 .bar{display:inline-block; width:34px; height:4px; background:var(--orange);\n    border-radius:2px; vertical-align:middle; margin-right:.55rem;}\n  .fawp-opt .sub{color:var(--grey); font-size:.95rem; margin:0 0 1rem;}\n  .fawp-opt .card{border:1px solid var(--line); border-radius:10px; overflow:hidden;\n    box-shadow:0 1px 3px rgba(12,17,24,.06);}\n  .fawp-opt table{width:100%; border-collapse:collapse; font-size:.95rem; background:#fff;}\n  .fawp-opt thead th{background:var(--blue); color:var(--cream); text-align:left;\n    padding:.8rem .85rem; font-weight:700; font-size:.9rem; letter-spacing:.02em;}\n  .fawp-opt tbody td{padding:.7rem .85rem; border-top:1px solid var(--line); vertical-align:top;}\n  .fawp-opt tbody tr:nth-child(even) td{background:var(--cream);}\n  .fawp-opt tbody tr:hover td{background:#FCEDE8;}\n  .fawp-opt .model{font-weight:700; color:var(--indigo);}\n  .fawp-opt .pill{display:inline-block; background:var(--orange); color:#fff; font-size:.72rem;\n    font-weight:700; padding:.12rem .5rem; border-radius:999px; margin-left:.4rem; vertical-align:middle;}\n  .fawp-opt .note{font-size:.85rem; color:var(--grey); margin:.6rem 0 1.6rem;}\n  @media (max-width:560px){\n    .fawp-opt table{font-size:.85rem;}\n    .fawp-opt thead th,.fawp-opt tbody td{padding:.55rem .5rem;}\n  }\n\u003c\/style\u003e\n\u003cdiv class=\"fawp-opt\"\u003e\n\u003cp class=\"sub\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003ePick the power that suits your pool.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"card\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eModel\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePower (HP)\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePower (kW)\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWattage\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest suited to\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan class=\"model\"\u003eFFL-051\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 HP\u003c\/td\u003e\n\u003ctd\u003e0.375 kW\u003c\/td\u003e\n\u003ctd\u003e370 W\u003c\/td\u003e\n\u003ctd\u003eSmaller above ground pools and compact filtration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan class=\"model\"\u003eFFL-071\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e0.75 HP\u003c\/td\u003e\n\u003ctd\u003e0.55 kW\u003c\/td\u003e\n\u003ctd\u003e550 W\u003c\/td\u003e\n\u003ctd\u003eMedium above ground pools needing a little more flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan class=\"model\"\u003eFFL-101\u003c\/span\u003e\u003cspan class=\"pill\"\u003ePopular\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1 HP\u003c\/td\u003e\n\u003ctd\u003e0.75 kW\u003c\/td\u003e\n\u003ctd\u003e750 W\u003c\/td\u003e\n\u003ctd\u003eMedium above ground and smaller in ground pools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan class=\"model\"\u003eFFL-151\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 HP\u003c\/td\u003e\n\u003ctd\u003e1.1 kW\u003c\/td\u003e\n\u003ctd\u003e1100 W\u003c\/td\u003e\n\u003ctd\u003eLarger above ground and small to medium in ground pools, or longer pipe runs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWhat is the Pentair Freeflo pump used for?\u003c\/h3\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eCirculating and filtering water in above ground swimming pools\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eFiltration for smaller in ground pools, especially the 1HP and 1.5HP options\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eQuieter pool plant rooms and pools close to patios, decking or living spaces\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eInstallations with longer pipe runs or extra equipment, where a higher power option helps\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eA like for like replacement for older Swimmey series pumps\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eConstruction and durability\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003eThe Freeflo is built around thick walled body parts and highly engineered hydraulics, giving it the strength to cope with the demands of continuous pool circulation. The mono block construction houses the motor and wet end as a single, compact unit, which reduces vibration and helps the pump run more quietly. At its heart is a heavy duty TEFC (totally enclosed fan cooled) motor that is thermally protected with built in auto reset overload protection and carries an IPX5 weather resistance rating, so it stands up well to a typical poolside environment. The single piece see through Cam and Ramp lid and large long life HDPE strainer basket are designed for repeated use and easy cleaning, while 50mm swivel unions give a secure, flexible seal. This rugged, tested design is consistent across all four power options and is backed by a 3 year limited warranty.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the Pentair Freeflo?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003eChoose the Freeflo when you want a quiet, dependable pool pump from a trusted brand, with the flexibility to pick exactly the right power for your pool. The self priming design and see through lid make everyday maintenance quick and clean, while the rugged build is engineered to keep going year after year. Because the range spans 0.5HP to 1.5HP, you only pay for the power you actually need, from economical circulation on a smaller pool to stronger flow for larger pools and longer pipe runs. With 50mm swivel unions, a 90 degree rotatable discharge and drop in compatibility with the Swimmey series, it is easy to fit into most existing setups, and the 3 year limited warranty gives lasting peace of mind.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003ePentair Freeflo pump with mono block motor (in your chosen power option)\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eIntegrated prefilter housing with large HDPE strainer basket\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eSingle piece, see through Cam and Ramp lid with O ring\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eTwo 50mm swivel unions for inlet and discharge\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e1.5 m flexible power supply cord (single phase)\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eInstallation guide and owner manual\u003c\/p\u003e","brand":"Pentair","offers":[{"title":"0.5hp 0.375kW - 230V","offer_id":56306938511739,"sku":"FFL-051","price":302.48,"currency_code":"GBP","in_stock":true},{"title":"0.75hp 0.55kW - 230V","offer_id":56306938544507,"sku":"FFL-071","price":340.83,"currency_code":"GBP","in_stock":true},{"title":"1hp 0.75kW - 230V","offer_id":56306938577275,"sku":"FFL-101","price":354.17,"currency_code":"GBP","in_stock":true},{"title":"1.5hp 1.1kW - 230V","offer_id":56307036258683,"sku":"FFL-151","price":415.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Pentair_Freeflo_Single_Phase_Swimming_Pool_Pump_1.jpg?v=1782130733"},{"product_id":"pentair-5p2r-la-sta-rite-pool-pump","title":"LA Sta-Rite 5P2R Pool Pump | Heavy-Duty Self-Priming, 0.5 to 1.5HP","description":"\u003ch2\u003ePentair La Sta-Rite 5P2R: High Head, Reliable Pool Circulation\u003c\/h2\u003e\n\u003cp style=\"margin-bottom: 6.0pt;\" class=\"MsoNormal\"\u003eThe Pentair La Sta-Rite 5P2R is a high efficiency, low maintenance pool pump from one of the most trusted names in the industry. Its high head impellers make it a strong choice where the plant room sits well back from the pool, and a corrosion resistant build with stainless steel inserts, an AISI 304 stainless drive end shaft and sealed SKF bearings is designed to keep running for years. The extra large pre filter basket means longer gaps between cleaning, and the stainless steel locking clamp makes servicing quick, as well as allowing a straightforward upgrade to a variable speed motor. The 5P2R is available in four power options, in single or three phase, and is salt resistant for use with salt chlorinated pools.\u003c\/p\u003e\n\u003ch3\u003eKey Features at a Glance\u003c\/h3\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eHigh head impellers, ideal where the plant room is set back from the pool\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eExtra large pre filter basket for longer periods between cleaning\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eStainless steel locking clamp for quick servicing and easy upgrade to variable speed\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eRemovable strainer, so the pump can also be used as a booster pump\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eInduction asynchronous motor with AISI 304 stainless steel drive end shaft and sealed SKF bearings\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eCorrosion resistant stainless steel inserts and an IPX5 rated motor\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e1.5 inch BSP connections with 50mm unions included\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eSalt resistant to 0.4 percent (4 g\/l) for salt chlorinated pools\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eFour power options in single or three phase\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e2 year warranty\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e \u003c\/p\u003e\n\u003ch3\u003eChoose your La Sta-Rite: power and phase options\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 6.0pt;\" class=\"MsoNormal\"\u003eAll single speed La Sta-Rite 5P2R pumps share the same high head design and rugged build. Choose the power to suit your pool and pipe runs, and the phase to suit your electrical supply. If you are unsure, contact our team and we will help you pick the right option.\u003c\/p\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; font-family: Arial, Helvetica, sans-serif; font-size: 15px; border-radius: 8px; overflow: hidden; height: 356.934px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background: rgb(11, 83, 148); color: rgb(255, 255, 255); text-align: left; height: 20.9961px;\"\u003e\n\u003cth style=\"padding: 12px 14px; width: 15.2702%; height: 20.9961px;\"\u003eModel\u003c\/th\u003e\n\u003cth style=\"padding: 12px 14px; width: 12.2161%; height: 20.9961px;\"\u003ekW\u003c\/th\u003e\n\u003cth style=\"padding: 12px 14px; width: 16.1684%; height: 20.9961px;\"\u003ePhase\u003c\/th\u003e\n\u003cth style=\"padding: 12px 14px; width: 19.7614%; height: 20.9961px;\"\u003eVoltage\u003c\/th\u003e\n\u003cth style=\"padding: 12px 14px; width: 36.4688%; height: 20.9961px;\"\u003eBest suited to\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody style=\"color: #042c53;\"\u003e\n\u003ctr style=\"background: rgb(230, 241, 251); height: 41.9922px;\"\u003e\n\u003ctd style=\"padding: 11px 14px; width: 15.2702%; height: 41.9922px;\"\u003e5P2RC-1\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 12.2161%; height: 41.9922px;\"\u003e0.37 kW\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 16.1684%; height: 41.9922px;\"\u003eSingle phase\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 19.7614%; height: 41.9922px;\"\u003e230 V\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 36.4688%; height: 41.9922px;\"\u003eSmaller pools and shorter pipe runs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: rgb(255, 255, 255); height: 41.9922px;\"\u003e\n\u003ctd style=\"padding: 11px 14px; width: 15.2702%; height: 41.9922px;\"\u003e5P2RC-3\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 12.2161%; height: 41.9922px;\"\u003e0.37 kW\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 16.1684%; height: 41.9922px;\"\u003eThree phase\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 19.7614%; height: 41.9922px;\"\u003e400 V (380-420 V)\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 36.4688%; height: 41.9922px;\"\u003eSmaller pools on a three phase supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: rgb(230, 241, 251); height: 41.9922px;\"\u003e\n\u003ctd style=\"padding: 11px 14px; width: 15.2702%; height: 41.9922px;\"\u003e5P2RD-1\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 12.2161%; height: 41.9922px;\"\u003e0.55 kW\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 16.1684%; height: 41.9922px;\"\u003eSingle phase\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 19.7614%; height: 41.9922px;\"\u003e230 V\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 36.4688%; height: 41.9922px;\"\u003eMedium pools needing a little more flow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: rgb(255, 255, 255); height: 41.9922px;\"\u003e\n\u003ctd style=\"padding: 11px 14px; width: 15.2702%; height: 41.9922px;\"\u003e5P2RD-3\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 12.2161%; height: 41.9922px;\"\u003e0.55 kW\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 16.1684%; height: 41.9922px;\"\u003eThree phase\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 19.7614%; height: 41.9922px;\"\u003e400 V (380-420 V)\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 36.4688%; height: 41.9922px;\"\u003eMedium pools on a three phase supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: rgb(230, 241, 251); height: 41.9922px;\"\u003e\n\u003ctd style=\"padding: 11px 14px; width: 15.2702%; height: 41.9922px;\"\u003e5P2RE-1\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 12.2161%; height: 41.9922px;\"\u003e0.75 kW\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 16.1684%; height: 41.9922px;\"\u003eSingle phase\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 19.7614%; height: 41.9922px;\"\u003e230 V\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 36.4688%; height: 41.9922px;\"\u003eMedium to larger pools, a popular all rounder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: rgb(255, 255, 255); height: 41.9922px;\"\u003e\n\u003ctd style=\"padding: 11px 14px; width: 15.2702%; height: 41.9922px;\"\u003e5P2RE-3E2\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 12.2161%; height: 41.9922px;\"\u003e0.75 kW\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 16.1684%; height: 41.9922px;\"\u003eThree phase\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 19.7614%; height: 41.9922px;\"\u003e400 V (380-420 V)\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 36.4688%; height: 41.9922px;\"\u003eMedium to larger pools on a three phase supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: rgb(230, 241, 251); height: 41.9922px;\"\u003e\n\u003ctd style=\"padding: 11px 14px; width: 15.2702%; height: 41.9922px;\"\u003e5P2RF-1 \u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 12.2161%; height: 41.9922px;\"\u003e1.1 kW\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 16.1684%; height: 41.9922px;\"\u003eSingle phase\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 19.7614%; height: 41.9922px;\"\u003e230 V\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 36.4688%; height: 41.9922px;\"\u003eLarger pools or longer pipe runs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: rgb(255, 255, 255); height: 41.9922px;\"\u003e\n\u003ctd style=\"padding: 11px 14px; width: 15.2702%; height: 41.9922px;\"\u003e5P2RF-3E2\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 12.2161%; height: 41.9922px;\"\u003e1.1 kW\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 16.1684%; height: 41.9922px;\"\u003eThree phase\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 19.7614%; height: 41.9922px;\"\u003e400 V (380-420 V)\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 36.4688%; height: 41.9922px;\"\u003eLarger or light commercial pools on three phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: rgb(230, 241, 251); height: 41.9922px;\"\u003e\n\u003ctd style=\"padding-top: 11px; padding-right: 14px; padding-bottom: 11px; width: 15.2702%; height: 41.9922px;\"\u003e Variable  Speed\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 12.2161%; height: 41.9922px;\"\u003e 1.1 kW\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 16.1684%; height: 41.9922px;\"\u003e Single phase\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 19.7614%; height: 41.9922px;\"\u003e 230 V\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; width: 36.4688%; height: 41.9922px;\"\u003e Energy efficiency\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"margin-bottom: 6.0pt;\" class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin-bottom: 6.0pt;\" class=\"MsoNormal\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 6.0pt;\" class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003ch3\u003eWhat is the La Sta-Rite 5P2R pump used for?\u003c\/h3\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eFiltration and circulation for domestic and light commercial swimming pools\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eInstallations where the plant room is some distance from the pool, thanks to the high head impellers\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eSalt chlorinated pools, as the pump is salt resistant to 4 g\/l\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eUse as a booster pump, using the removable strainer\u003c\/p\u003e\n\u003cp style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\" class=\"MsoListParagraph\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eSites on a three phase supply, using the three phase options\u003c\/p\u003e\n\u003ch3\u003eConstruction and durability\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 6.0pt;\" class=\"MsoNormal\"\u003eThe La Sta-Rite 5P2R is engineered for a long service life in a demanding poolside environment. Corrosion resistant stainless steel inserts, a stainless steel locking clamp and a bi-material shaft with an AISI 304 stainless steel drive end all resist the effects of water and pool chemicals, and sealed SKF bearings keep the motor running smoothly. The induction asynchronous motor is IPX5 rated, with thermal protection on single phase models and IE2 efficiency on three phase models, and a mechanical seal protects the shaft. Made in Italy, the 5P2R is designed to operate for many years with minimal servicing, and the stainless steel clamp means the wet end can be opened quickly for basket cleaning or upgraded to a variable speed motor when needed.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the Pentair La Sta-Rite 5P2R?\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 6.0pt;\" class=\"MsoNormal\"\u003eChoose the La Sta-Rite when you want proven Sta-Rite reliability with strong head performance and low running maintenance. The high head impellers handle longer pipe runs and plant rooms set away from the pool better than many standard pumps, while the extra large basket and quick release stainless clamp keep upkeep simple. With four power options across single and three phase, salt resistance to 4 g\/l and unions included, it fits a wide range of domestic and light commercial pools. It is also future proof, because the same body upgrades easily to a variable speed motor if you want to cut running costs later. It is backed by a 2 year warranty.\u003c\/p\u003e\n\u003ch3 style=\"margin-bottom: 6.0pt;\" class=\"MsoNormal\"\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp style=\"margin-bottom: 6.0pt;\" class=\"MsoNormal\"\u003e\u003cbr\u003e•    Pentair La Sta-Rite 5P2R pump (in your chosen power and phase)\u003cbr\u003e•    Extra large removable strainer basket\u003cbr\u003e•    Transparent prefilter lid with O ring\u003cbr\u003e•    Stainless steel locking clamp\u003cbr\u003e•    50 mm unions for inlet and outlet (included)\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 6.0pt;\" class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"Pentair","offers":[{"title":"5P2RC-1 - 0.375kW - 230V","offer_id":56307139871099,"sku":"5P2RC-1","price":565.83,"currency_code":"GBP","in_stock":true},{"title":"5P2RC-3 - 0.37kW - 3 phase","offer_id":56307139903867,"sku":"5P2RC-3","price":574.17,"currency_code":"GBP","in_stock":true},{"title":"5P2RD-1 - 0.55kW - 230V","offer_id":56307139936635,"sku":"5P2RD-1","price":582.5,"currency_code":"GBP","in_stock":true},{"title":"5P2RD-3 - 0.55kW - 3 phase","offer_id":56307139969403,"sku":"5P2RD-3","price":624.17,"currency_code":"GBP","in_stock":true},{"title":"5P2RE-1 - 0.75kW - 230v","offer_id":56307146916219,"sku":"5P2RE-1","price":607.5,"currency_code":"GBP","in_stock":true},{"title":"5P2RE-3E2 - 0.75kW - 3 phase","offer_id":56307146948987,"sku":"5P2RE-3E2","price":640.83,"currency_code":"GBP","in_stock":true},{"title":"5P2RF-1 -  1.1kW - 230v","offer_id":56307146981755,"sku":"5P2RF-1","price":665.83,"currency_code":"GBP","in_stock":true},{"title":"5P2RF-3E2 - 1.1kW - 3 phase","offer_id":56307147014523,"sku":"5P2RF-3E2","price":699.17,"currency_code":"GBP","in_stock":false},{"title":"Variable Speed 1.5hp 1.1kW","offer_id":56307147047291,"sku":"5P2R-VS-1.5","price":1207.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Pentair_5P2R_La_Sta-Rite_Swimming_Pool_Pump_1.jpg?v=1782137348"},{"product_id":"pentair-swimmey-variable-speed-230v-swimming-pool-pump","title":"Pentair Swimmey VSe Variable Speed Pool Pump | 1HP","description":"\u003ch2\u003ePentair Swimmey VSe 1HP Variable Speed Pool Pump: Quiet, Efficient, Lower Running Costs\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003eThe Pentair Swimmey VSe 1HP is a variable speed swimming pool pump built to cut your running costs while keeping your water clear. Instead of running flat out like an old single speed pump, it lets you set the right speed for each job, so it filters quietly at a low speed for everyday use and ramps up only when you need it. With three programmable speeds, a built-in timer, a simple LCD display and a Quick Clean function, it puts efficient, automated filtration within easy reach. It also has built-in dry-run and over-current protection, is salt resistant up to 0.4 percent, and comes with 50mm unions for a straightforward fit to standard pipework.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin: 8.0pt 0cm 2.0pt 0cm;\"\u003e\u003cb\u003e\u003cspan style=\"color: #1f4e79;\"\u003eKey features at a glance\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eVariable speed motor with a 600 to 3000 RPM range for efficient, quiet filtration\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eThree programmable speeds with a built-in time-of-day timer\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eQuick Clean function for fast, high-flow tasks like backwashing and vacuuming\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eSimple LCD display showing speed (RPM), power (Watts) and time\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eBuilt-in dry-run detection and over-current protection\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eSalt resistant up to 0.4 percent (4 g\/l)\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e50mm unions included, with reducers to 1.5 inch\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e3 digital inputs and RS-485 for pool automation systems\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eWhat is the Pentair Swimmey VSe 1HP pump used for?\u003c\/h3\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eEnergy efficient daily filtration and circulation for permanent in-ground pools\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eRunning quietly at low speed for long filtration periods, where most of the energy savings are made\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eHigher speed bursts for backwashing, vacuuming or faster turnover using the Quick Clean function\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eReplacing an older single speed pump to reduce electricity use and noise\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eSalt chlorinated pools, as it is salt resistant up to 0.4 percent (4 g\/l)\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003ePools controlled by an automation system, via the digital inputs or RS-485 connection\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eConstruction and durability\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003eThe Swimmey VSe is built around an induction, totally enclosed fan-cooled (TEFC) motor designed for quiet, reliable running, paired with a drive that controls speed by varying the supply frequency and protects the motor from operating outside safe limits. Running at lower speeds for much of the time means less heat, less vibration and less wear, which helps extend the life of the pump. A clear strainer pot lid lets you check the large basket at a glance, and the drive includes dry-run detection and over-current protection to guard against damage from loss of prime or blockages. The housing is salt resistant up to 0.4 percent, and the wiring compartment is sealed against dust and moisture, making it well suited to a typical poolside plant room.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eWhy choose the Pentair Swimmey VSe 1HP?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003eChoose the Swimmey VSe when you want to lower your pool's energy bills and noise without sacrificing reliability. Because a pool only needs a fraction of full flow to filter properly, running this pump at a low, steady speed for longer uses far less electricity than a single speed pump running at full power, and it does so much more quietly. The three programmable speeds plus timer let you automate filtration around your day, while Quick Clean gives you a quick high-flow boost when you need it. It is simple to set up through the on-board display, fits standard 50mm pipework with the supplied unions, and can be linked to a pool automation system later if you wish. For most owners it pays back its cost through lower running bills over the life of the pump.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003ePentair Swimmey VSe 1HP variable speed pump with drive and keypad\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eRemovable strainer basket and see-through prefilter lid with O-ring\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e50 mm self-aligning unions with reducers to 1.5 inch\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e2 m power cable with Schuko European plug and a 3-pin UK adaptor\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eConduit plugs for unused openings\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003e \u003c\/p\u003e","brand":"Pentair","offers":[{"title":"Default Title","offer_id":56308001046907,"sku":null,"price":807.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Pentair_Swimmey_VSe_1HP_Variable_Speed_Pool_Pump.jpg?v=1782206785"},{"product_id":"espa-repospool-swimming-pool-pump","title":"ESPA Repospool 100M Pool Pump | Adjustable Flow, Salt-Safe","description":"\u003ch2\u003eESPA Repospool 100M: The Easy Replacement Pool Pump\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003eThe ESPA Repospool 100 M is a 1 HP single phase pool pump designed specifically to make replacing an old or failed pump simple. Its patented adjustable design lets you change the height, position and connection length to match almost any existing setup, so you can swap out a pump from another brand without re-plumbing or moving pipework. Built for small and medium residential pools, it offers quiet operation, a flow rate of up to 22 m3\/h and corrosion resistant materials, and it is compatible with salt water pools up to 6 g\/l. For anyone retrofitting a pool pump, it takes the hassle out of the job.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin: 8.0pt 0cm 2.0pt 0cm;\"\u003e\u003cb\u003e\u003cspan style=\"color: #1f4e79;\"\u003eKey features at a glance\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003ePatented easy-exchange design for straightforward replacement of existing pumps\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eAdjustable in height and position, with extendable suction and return connections\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eFlow rate up to 22 m3\/h (15 m3\/h at 8 m head)\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eVery quiet operation, ideal for residential settings\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eCompatible with salt water pools up to 6 g\/l\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eCorrosion resistant materials for long life\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eHandles water temperatures up to 40 degrees C\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eSingle phase 230 V, 1 HP (0.75 kW) with built-in thermal protection\u003c\/p\u003e\n\u003ch3\u003eWhat is the ESPA Repospool 100M pump used for?\u003c\/h3\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eRecirculation and filtration in small and medium residential swimming pools\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eReplacing an old, failed or noisy pump, especially one from another brand\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eRetrofit installations where you want to avoid changing existing pipework\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eSalt chlorinated pools, as it is compatible with salt water up to 6 g\/l\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003ePools where quiet running matters, such as those near patios or living spaces\u003c\/p\u003e\n\u003ch3\u003eConstruction and durability\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003eThe Repospool is built to last in a poolside environment. The pump body, lid, impeller and diffuser are made from durable polymer that will not corrode, the pump shaft is AISI 431 stainless steel and the mechanical seal is AISI 316 stainless steel, while the motor housing is aluminium and the seals are NBR. The two-pole asynchronous motor is rated IPX5 with class F insulation, has built-in thermal protection and is designed for continuous duty (S1), so it can run day in, day out. Salt resistance up to 6 g\/l makes it suitable for salt chlorinated pools, and it handles water up to 40 degrees C. Together with its quiet running, this makes a rugged, low maintenance pump that is well suited to long-term residential use.\u003c\/p\u003e\n\u003ch3\u003eWhy choose the ESPA Repospool 100M?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003eChoose the Repospool when you need to replace an existing pool pump with the least possible disruption. Its standout feature is the patented adjustable design: the height, position and connection lengths can all be altered to line up with your current pipework, so in most cases you can fit it without cutting pipe or moving fittings. That saves time and installation cost, and avoids the headache of trying to match the footprint of a discontinued pump. On top of that you get genuinely quiet operation, strong flow for small and medium pools, high salt tolerance up to 6 g\/l, and corrosion resistant materials throughout. For a straightforward, reliable replacement pump, it is hard to beat.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003e \u003c\/p\u003e\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eESPA Repospool 100 M pump (single phase) with prefilter and strainer basket\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eSee-through prefilter lid\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003e63 mm pipe connectors with 50 mm pipe adapters\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eAdjustable riser feet (10 to 80 mm)\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003eInstallation guide\u003c\/p\u003e\n\u003cp class=\"MsoListParagraph\" style=\"text-indent: -14.0pt; mso-list: l0 level1 lfo1; margin: 0cm 0cm 2.0pt 27.0pt;\"\u003e\u003c!-- [if !supportLists]--\u003e\u003cspan style=\"mso-list: Ignore;\"\u003e•\u003cspan style=\"font: 7.0pt 'Times New Roman';\"\u003e      \u003c\/span\u003e\u003c\/span\u003e\u003c!--[endif]--\u003ePlease note: supplied without a power cable\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 6.0pt;\"\u003e \u003c\/p\u003e","brand":"ESPA","offers":[{"title":"Default Title","offer_id":56308081557883,"sku":null,"price":557.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Espa_Repospool_100m_swimming_pool_pump_1.jpg?v=1782207656"},{"product_id":"non-return-valve-hose-tail-kit-1-bsp-25mm","title":"Non-Return Valve \u0026 Hose Tail Kit – 25mm (1″ BSP)","description":"\u003cp\u003eStop pumped water flowing back down your discharge hose. This kit pairs a 1″ BSP non-return valve with a matching 25 mm hose tail, giving your 25mm outlet Puddle Pump a one-way outlet that holds the water column in the hose once it has been pumped.\u003c\/p\u003e\n\u003cp\u003eIdeal for use with the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/stream-spp2-4-submersible-puddle-pump?_pos=1\u0026amp;_psq=spp2\u0026amp;_psid=82dbe5995\u0026amp;_ss=e\" title=\"SPP2 Puddle Pump\"\u003eStream SPP2 Puddle Pump\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhy fit a non-return valve to a puddle pump?\u003c\/h3\u003e\n\u003cp\u003ePuddle pumps are designed to work in very shallow water. When the water level drops to the last few millimetres, the pump naturally begins to draw in air. Without a non-return valve, any water still sitting in the discharge hose can then flow back through the pump and return to the area you have just cleared, which can look like the pump has stopped working, when in fact it is behaving exactly as expected in those conditions.\u003c\/p\u003e\n\u003cp\u003eThis is not a pump fault; it is simply how any open discharge line behaves at very low water levels, particularly with longer hose runs or where water is lifted over a height. Premium low-level pumps such as the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/stream-spk530-puddle-sucker?_pos=1\u0026amp;_psq=spk\u0026amp;_psid=74be149b0\u0026amp;_ss=e\" title=\"SPK530 Puddle Pump\"\u003eStream SPK530\u003c\/a\u003e and \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/tsurumi-lsc1-4s-puddle-sucker-pump?_pos=3\u0026amp;_psq=lsc\u0026amp;_psid=9bd30b97b\u0026amp;_ss=e\" title=\"Tsurumi LSC1.4S Puddle Pump\"\u003eTsurumi LSC1.4S\u003c\/a\u003e build a non-return valve into their design for exactly this reason. This kit adds the same protection to your puddle pump.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eThe non-return valve screws directly onto the pump outlet and acts as a one-way gate: water passes freely on the way out, but the valve closes the moment flow stops or reverses. The water already pumped stays in the hose instead of draining back, so you keep the ground you have gained and the pump re-primes faster when the water level rises again. The 25 mm hose tail threads onto the valve, ready for a standard 25 mm (1″) discharge hose secured with a hose clip.\u003c\/p\u003e\n\u003ch3\u003eKey benefits\u003c\/h3\u003e\n\u003cp\u003e•    Prevents backflow, pumped water can’t drain back through the pump when the level drops or the pump stops.\u003cbr\u003e•    Ideal for shallow-water and low-level pumping, where air draw at the end of a pump-down is normal.\u003cbr\u003e•    Reduces airlock problems on longer hose runs and lifts over height.\u003cbr\u003e•    Direct fit for the SPP2 Puddle Pump, no tools or modifications beyond a hose clip.\u003cbr\u003e•    Two-piece kit: 1″ BSP non-return valve plus matching 25 mm hose tail.\u003c\/p\u003e\n\u003ch3\u003eFitting note\u003c\/h3\u003e\n\u003cp\u003eScrew the non-return valve onto the pump outlet, fit the hose tail to the valve, then push on your 25 mm discharge hose and secure with a hose clip. Keep hose runs as short and direct as practical – very long runs or high lifts increase the volume of water the valve has to hold. If you need a detailed review of your full installation (hose length, pumping distance, vertical lift and discharge arrangement), our engineering team can carry this out as a paid technical service – contact us for details.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%; max-width: 480px; font-family: Arial,sans-serif; font-size: 15px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; padding: 8px 12px; background: #f4f6f8; border: 1px solid #d9dee3; width: 45%;\"\u003eKit contents\u003c\/th\u003e\n\u003ctd style=\"padding: 8px 12px; border: 1px solid #d9dee3;\"\u003eNon-return valve + hose tail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; padding: 8px 12px; background: #f4f6f8; border: 1px solid #d9dee3;\"\u003eConnection\u003c\/th\u003e\n\u003ctd style=\"padding: 8px 12px; border: 1px solid #d9dee3;\"\u003e1\" BSP female to pump outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; padding: 8px 12px; background: #f4f6f8; border: 1px solid #d9dee3;\"\u003eHose size\u003c\/th\u003e\n\u003ctd style=\"padding: 8px 12px; border: 1px solid #d9dee3;\"\u003e25mm (1 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; padding: 8px 12px; background: #f4f6f8; border: 1px solid #d9dee3;\"\u003eSuitable for\u003c\/th\u003e\n\u003ctd style=\"padding: 8px 12px; border: 1px solid #d9dee3;\"\u003eSPP2 Puddle Pump and other pumps with a 1\" BSP outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left; padding: 8px 12px; background: #f4f6f8; border: 1px solid #d9dee3;\"\u003eFunction\u003c\/th\u003e\n\u003ctd style=\"padding: 8px 12px; border: 1px solid #d9dee3;\"\u003eOne-way flow, prevents backflow, aids re-priming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FPS Engineered™","offers":[{"title":"Default Title","offer_id":56344235475323,"sku":null,"price":6.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/SPP2_Puddle_Pump_with_NRV_fitted_2.jpg?v=1784710972"},{"product_id":"garden-irrigation-pump-kit-mvh","title":"Garden Sprinkler Pump Kit for Rivers, Wells \u0026 Rainwater Tanks | APP MVH-10A","description":"\u003ch2\u003eGarden sprinkler pump kit for rivers, wells, lakes and rainwater tanks\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eA complete submersible pump kit for running garden sprinklers from clean water in a river, well, tank or water butt.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis FPS Engineered™ kit pairs the APP MVH-10A automatic submersible pump with your choice of 25 m or 30 m of 19 mm bore hose and the fittings to connect it. The pump sits in the water and runs whenever it is submerged, giving a steady, continuous supply that is ideal for sprinklers.\u003c\/p\u003e\n\u003cp\u003ePart of our wider \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/well-and-borehole-pumps\"\u003ewell and borehole pump\u003c\/a\u003e range.\u003c\/p\u003e\n\u003cp\u003eBecause the MVH-10A is controlled by \u003cstrong\u003ewater level, not pressure\u003c\/strong\u003e, it does not start and stop with demand, so it will not cycle the way a pressure pump can on an oscillating sprinkler. That makes it our first choice for sprinkler duty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSprinkler not included\u003c\/strong\u003e, so you can choose the sprinkler or fitting that suits your garden.\u003c\/p\u003e\n\u003cp\u003eIf used with a spray gun, the gun must be left \"open\" whilst ever the pump is running. The pump will not switch off if the gun is closed, and the pump will burn out.\u003c\/p\u003e\n\u003cdiv style=\"margin: 28px 0; padding: 20px 24px; background: #F0EDE5; border-left: 4px solid #283583; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong\u003eDo you need an abstraction licence?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003eIn England, you are likely to need an abstraction licence from the Environment Agency if you intend to take more than \u003cstrong\u003e20 cubic metres, or 20,000 litres, in a day\u003c\/strong\u003e from a river, stream, lake, pond, canal, reservoir, spring or underground source.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003eSmaller abstractions are often exempt, but exemptions have narrowed in recent years, so do not assume, and other permissions may still apply. Always confirm that you have the landowner's permission and that abstraction is lawful and environmentally appropriate for the source. You can \u003ca href=\"https:\/\/www.gov.uk\/guidance\/check-if-you-need-a-licence-to-abstract-water\"\u003echeck whether you need a licence on GOV.UK\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003e\u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/blogs\/news\/water-abstraction-licences-explained\"\u003e\u003cstrong\u003eRead our guide to water abstraction licences\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"to9hz3\" data-start=\"7445\" data-end=\"7547\"\u003e\n\u003cstrong data-start=\"7447\" data-end=\"7491\"\u003eDesigned for continuous-flow sprinklers or irrigation:\u003c\/strong\u003e Level-controlled operation avoids demand-based cycling.\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"dpw1kf\" data-start=\"7548\" data-end=\"7617\"\u003e\n\u003cstrong data-start=\"7550\" data-end=\"7578\"\u003eStrong pump performance:\u003c\/strong\u003e Up to 110 L\/min and 32 m maximum head.\u003c\/li\u003e\n\u003cli data-section-id=\"atksb7\" data-start=\"7618\" data-end=\"7712\"\u003e\n\u003cstrong data-start=\"7620\" data-end=\"7646\"\u003e19 mm hose:\u003c\/strong\u003e Less restrictive than standard 12.5 mm garden hose.\u003c\/li\u003e\n\u003cli data-section-id=\"3ql89n\" data-start=\"7713\" data-end=\"7813\"\u003e\n\u003cstrong data-start=\"7715\" data-end=\"7755\"\u003eFloat-controlled low-water shut-off:\u003c\/strong\u003e Stops automatically as the surrounding water level falls.\u003c\/li\u003e\n\u003cli data-section-id=\"isnjvo\" data-start=\"7814\" data-end=\"7918\"\u003e\n\u003cstrong data-start=\"7816\" data-end=\"7842\"\u003eHozelock-ready outlet:\u003c\/strong\u003e Connects directly to compatible sprinklers and garden watering accessories.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × APP MVH-10A automatic submersible pump\u003c\/li\u003e\n\u003cli data-section-id=\"1feg93x\" data-start=\"1275\" data-end=\"1326\"\u003e1 × 1\" BSP male × ¾\" BSP male reducing nipple\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"1530h9s\" data-start=\"1327\" data-end=\"1385\"\u003e2 × 19 mm hose tail × ¾\" BSP female swivel, straight\u003c\/li\u003e\n\u003cli data-section-id=\"x7583j\" data-start=\"1386\" data-end=\"1445\"\u003e1 × 19 mm hose tail × ¾\" BSP female swivel, 90° elbow\u003c\/li\u003e\n\u003cli data-section-id=\"1vw1lhy\" data-start=\"1446\" data-end=\"1514\"\u003e1 × Hozelock 2170, ¾\" BSP male to female Quick Connect adaptor\u003c\/li\u003e\n\u003cli data-section-id=\"8q9eqf\" data-start=\"1515\" data-end=\"1547\"\u003e2 × stainless-steel hose clips\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSprinkler not included. The supplied Hozelock adaptor provides a female Quick Connect outlet. Check that your chosen sprinkler has a compatible connector.\u003c\/p\u003e\n\u003ch3\u003ePump connections\u003c\/h3\u003e\n\u003cp\u003eThe MVH-10A has a 25 mm (1 inch) screw thread BSP outlet. The supplied 25 mm to 19 mm reducing nipple steps this down to 19 mm, and one of the two hose tails then screws on to suit how you want the hose to leave the pump:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorizontal outlet:\u003c\/strong\u003e use the straight 19 mm female BSP hose tail so the hose leaves the pump horizontally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical outlet:\u003c\/strong\u003e use the 19 mm female BSP elbow hose tail where it is better for the hose to rise vertically.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 19 mm hose is pushed fully over the ribbed hose tail and secured with the supplied stainless-steel clip.\u003c\/p\u003e\n\u003ch3\u003eChoose your hose\u003c\/h3\u003e\n\u003cp\u003eBoth hoses are 19 mm bore and rated suitably for the pressure, so either suits the job. The choice comes down to reach and handling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-end=\"334\" data-start=\"312\"\u003e30 m braided hose:\u003c\/strong\u003e The practical choice for everyday domestic garden watering. Lighter and more flexible, it is easier to handle, coil and route around borders, paths and obstacles, while providing an extra 5 metres of reach with only a modest reduction in estimated flow.\u003c\/p\u003e\n\u003cp class=\"PDq2pG_selectionAnchorContainer\" data-end=\"310\" data-start=\"21\"\u003e\u003cstrong data-end=\"49\" data-start=\"21\"\u003e25 m high-pressure hose:\u003c\/strong\u003e The tougher, harder-wearing option for frequent use, commercial applications and grounds maintenance. Its heavy-duty construction offers greater resistance to pressure, abrasion and general wear, while the shorter run provides a slightly higher estimated flow.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eThe MVH-10A is controlled by a \u003cstrong\u003efloat switch\u003c\/strong\u003e. It runs while it is submerged and switches off automatically if the surrounding water level drops. It responds to water level, not to pressure or to a tap being opened or closed, so it gives a steady, continuous flow while running. Power it from a suitable protected 230 V supply.\u003c\/p\u003e\n\u003ch3\u003eImportant: water must discharge continuously\u003c\/h3\u003e\n\u003cdiv style=\"margin: 26px 0; padding: 18px 22px; background: #FBF9F3; border: 1px solid #E5DED8; border-left: 4px solid #E8542B; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong style=\"color: #c8431d;\"\u003eThe pump does not stop when the outlet is closed.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eThe pump runs when it is powered and the surrounding water raises the float switch. As the water level falls, the float drops and switches the pump off automatically.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eDo not run it against a closed valve, closed nozzle or blocked outlet. If you fit a trigger spray gun, keep it locked open, and switch the pump off at its plug before closing the outlet or disconnecting equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eBecause it runs steadily rather than starting and stopping with demand, the MVH-10A suits \u003cstrong\u003eoscillating, rotating and static sprinklers, open-ended irrigation and continuous watering\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWhere you instead want on-demand operation from a trigger spray gun, a pressure-controlled pump such as the \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/divertron-submersible-well-water-pumps\"\u003eDAB Divertron\u003c\/a\u003e is the better choice.\u003c\/p\u003e\n\u003ch3\u003eExpected performance\u003c\/h3\u003e\n\u003cp\u003eEstimated flow with the hose open and no sprinkler or nozzle fitted. A\u003cspan\u003ectual performance varies with hose length, elevation and the sprinkler fitted.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"overflow-x: auto; -webkit-overflow-scrolling: touch; border: 1px solid #E5DED8; border-radius: 10px; margin: 22px 0;\"\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%; font-size: 14px; background: #ffffff;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003e19 mm hose\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003eUphill elevation\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003eEstimated unrestricted flow\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003e25 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e2 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 52 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003e25 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e5 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 48 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003e30 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e2 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 49 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003e30 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e5 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 45 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size: 13px; color: #6b7280; line-height: 1.6; margin: 10px 0 0;\"\u003e\u003cem\u003eEstimated using the published MVH-10A curve and Hazen-Williams friction. Figures show estimated flow with the hose discharging freely and no sprinkler fitted. Connecting a sprinkler will reduce the flow and create working pressure at the hose end. Actual performance depends on the sprinkler’s flow requirement, hose length, elevation and fittings.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eTechnical specification\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; -webkit-overflow-scrolling: touch; border: 1px solid #E5DED8; border-radius: 10px; margin: 22px 0;\"\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%; font-size: 14px; background: #ffffff;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003eAPP MVH-10A\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eOperation\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eAutomatic float switch (level-controlled)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003ePump type\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eSubmersible clean-water well and irrigation pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eOutlet\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e25 mm (1 inch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMotor power\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e0.55 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eVoltage\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e230 V single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMaximum flow\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e110 litres per minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMaximum head\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e32 metres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMaximum submersion depth\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e8 metres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eWater temperature\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e0°C to 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003ePower cable\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e10 metres with plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e162 × 171 × 461 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e9.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003eInstallation and water quality\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall in clean water, fully submerged with at least 50 mm of water above the pump for cooling.\u003c\/li\u003e\n\u003cli\u003eKeep the pump clear of the bed to avoid drawing in mud, silt or gravel, and give the float switch room to move freely.\u003c\/li\u003e\n\u003cli\u003eNever lift, lower or suspend the pump by its electrical cable.\u003c\/li\u003e\n\u003cli\u003eProvide suitable electrical protection and keep plugs and connections dry.\u003c\/li\u003e\n\u003cli\u003eMinimum clear well or chamber width: approximately 435 mm, to allow the float switch to operate freely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"margin: 26px 0; padding: 18px 22px; background: #FBF9F3; border: 1px solid #E5DED8; border-left: 4px solid #E8542B; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0;\"\u003e\u003cstrong\u003eClean water only.\u003c\/strong\u003e Water containing sand, silt or abrasive material can damage the pump and invalidate the warranty. This kit is not for sewage, dirty or salt water, or for permanent pond circulation, filtration, fountains or aeration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eUsing untreated water safely\u003c\/h3\u003e\n\u003cdiv style=\"margin: 26px 0; padding: 18px 22px; background: #FBF9F3; border: 1px solid #E5DED8; border-left: 4px solid #E8542B; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong style=\"color: #c8431d;\"\u003eThis kit moves water. It does not treat, filter or disinfect it.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eWater taken from rivers, streams, lakes, ponds, wells, tanks and water butts is \u003cstrong\u003enot drinking water\u003c\/strong\u003e. It can contain bacteria, viruses, chemicals, agricultural run-off, algae or other contaminants even when it looks clear. Do not use this pump to supply water for drinking, food preparation or filling drinking-water systems, and assess whether a source is suitable for your intended use before you draw from it.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eBefore pumping from a river, lake or stream\u003c\/h3\u003e\n\u003cp\u003eOwning the pump does not itself give you the right to take water from a natural source. You may need the permission of the landowner, riparian owner or waterbody operator, and environmental or abstraction restrictions may apply. During dry weather or drought, additional restrictions may be introduced to protect flows, habitats and other water users.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/blogs\/news\/can-i-pump-water-from-a-river-or-stream\"\u003e\u003cstrong\u003eRead our guide: Can I pump water from a river or stream?\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eIs water from this pump safe to drink?\u003c\/h4\u003e\n\u003cp\u003eNo. The kit moves water but does not treat, filter or disinfect it. Water from rivers, ponds, wells, tanks and water butts is not drinking water and can contain bacteria, chemicals or algae even when it looks clear. Do not use it for drinking, food preparation or filling drinking-water systems.\u003c\/p\u003e\n\u003ch4\u003eDoes the pump start and stop automatically?\u003c\/h4\u003e\n\u003cp\u003eIt is controlled by water level, not by demand. It runs whenever it is submerged and switches off automatically if the water level falls below the float switch. It does not start or stop when you open or close a tap or nozzle, so the outlet must stay open while it runs.\u003c\/p\u003e\n\u003ch4\u003eWill it run an oscillating sprinkler?\u003c\/h4\u003e\n\u003cp\u003eIt is well suited to continuous-flow sprinkler duty because it does not switch on and off in response to sprinkler demand. Actual coverage and performance will still depend on the flow and pressure required by the particular sprinkler.\u003c\/p\u003e\n\u003ch4\u003eCan I use it with a trigger spray gun?\u003c\/h4\u003e\n\u003cp\u003eOnly if the gun is kept locked open, because the pump will not stop when you release the trigger. For frequent on and off spray-gun use, a pressure-controlled pump such as the DAB Divertron is more suitable.\u003c\/p\u003e\n\u003ch4\u003eWhat water can it pump?\u003c\/h4\u003e\n\u003cp\u003eClean water only, from wells, rainwater tanks, cisterns, rivers, lakes and water butts. It is not for sandy, silty, dirty or salt water, sewage, ponds or water features.\u003c\/p\u003e","brand":"FPS Engineered™","offers":[{"title":"30m braided hose","offer_id":56350576214395,"sku":"KIT-MVH10A-SPR-30BR","price":360.95,"currency_code":"GBP","in_stock":true},{"title":"25m high-pressure hose","offer_id":56350614258043,"sku":"KIT-MVH10A-SPR-25HP","price":402.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Irrigation_Kit_River_Pump_-_clean_Water_4.jpg?v=1784904067"},{"product_id":"divertron-watering-kit","title":"Garden Watering Pump Kit for Spray Guns | DAB Divertron 900","description":"\u003ch2\u003eGarden watering pump kit for spray guns, wells and rainwater tanks\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTurn a well, rainwater tank, cistern or storage tank into a powerful, automatic garden watering supply.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis FPS Engineered™ kit pairs the DAB Divertron 900 automatic submersible pump with your choice of 25 m or 30 m of 19 mm diameter hose and a genuine Hozelock Quick Connect outlet.\u003c\/p\u003e\n\u003cp\u003eDrop the pump into a clean water source and click on any compatible spray gun: open the gun and the pump starts on its own, close it and the pump switches off after a short delay. There is no separate pressure switch, controller or manual on\/off to operate.\u003c\/p\u003e\n\u003cp\u003eSpray gun not included, so you can choose the Hozelock-compatible model that suits you.\u003c\/p\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully automatic:\u003c\/strong\u003e starts when the spray gun opens, stops when it closes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong performance:\u003c\/strong\u003e up to 100 litres per minute and 45 m maximum head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge-bore 19 mm hose:\u003c\/strong\u003e far less friction loss than standard 12.5 mm garden hose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Hozelock outlet:\u003c\/strong\u003e clicks onto any compatible spray gun, nozzle or lance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete kit:\u003c\/strong\u003e pump, hose, brass hose tails, stainless-steel clips and Hozelock adaptor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × DAB Divertron 900 automatic submersible pump \u003c\/li\u003e\n\u003cli\u003e1 x  female hose tail, 1\" BSP tiered with 1\" and 3\/4\" inch hose tails\u003c\/li\u003e\n\u003cli\u003e1 × 15 m H07RN-F power cable with plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × female hose tail with ¾ inch connection\u003c\/li\u003e\n\u003cli\u003e2 × correctly sized stainless-steel hose clips\u003c\/li\u003e\n\u003cli\u003e1 × genuine Hozelock 2170 ¾ inch BSP Quick Connect adaptor\u003c\/li\u003e\n\u003cli\u003eEither 25 m of 19 mm high-pressure hose, or 30 m of 19 mm braided hose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpray gun not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat can I use it for?\u003c\/h3\u003e\n\u003cp\u003eBuilt for domestic, commercial and light agricultural watering from clean water, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWatering gardens, allotments and smallholdings from stored rainwater\u003c\/li\u003e\n\u003cli\u003eDrawing clean water from wells, cisterns and storage tanks\u003c\/li\u003e\n\u003cli\u003eHand watering with a spray gun, trigger nozzle or watering lance\u003c\/li\u003e\n\u003cli\u003eNurseries, horticulture and grounds maintenance\u003c\/li\u003e\n\u003cli\u003eOutdoor washdown, and filling cans, containers and troughs\u003c\/li\u003e\n\u003cli\u003eRainwater harvesting and reuse systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFully automatic watering\u003c\/h3\u003e\n\u003cp\u003eThe Divertron 900 has an integrated pressure switch and flow sensor. Open the spray gun and system pressure falls, so the pump starts automatically (cut-in around 2.4 bar). Close the gun and, once flow stops, the pump shuts down after a short delay. A built-in non-return valve holds pressure between uses, and dry-run and thermal protection guard the pump if the water runs low or the motor overheats. In short, it gives the convenience of an outside tap without a separate controller, pressure vessel or manual switching.\u003c\/p\u003e\n\u003ch3\u003eHow the kit connects\u003c\/h3\u003e\n\u003cp\u003eA 1 inch BSP male tiered hose tail (1\" and 3\/4\") screws into the Divertron's outlet, and the 19 mm hose slides over it, secured with a stainless-steel clip.\u003c\/p\u003e\n\u003cp\u003eAt the far end, a second 19 mm hose tail carries a ¾ inch BSP female thread, into which the genuine Hozelock 2170 adaptor screws to give a female Hozelock Quick Connect fitting. Your compatible spray gun then clicks straight in.\u003c\/p\u003e\n\u003cp\u003eThe adaptor is rated to 10 bar, comfortably above the pump's maximum of about 4.5 bar.\u003c\/p\u003e\n\u003ch3\u003eWhy 19 mm hose?\u003c\/h3\u003e\n\u003cp\u003eStandard garden hose is usually only 12.5 mm bore. That is fine on a mains tap, but a long narrow run would throttle a powerful pump like the Divertron 900.\u003c\/p\u003e\n\u003cp\u003eThe supplied 19 mm hose has more than twice the waterway area, so it passes far more water and loses much less pressure over the full 25 or 30 m run, giving stronger spray-gun performance.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThat said, the pump has plenty in reserve. Thanks to its wide operating range (16.7 to 90 litres per minute), you can extend your reach by connecting standard 12.5 mm garden hose to the Hozelock outlet if you need to. On flat ground you can add up to around 25 m of 12.5 mm hose and still get roughly 28 litres per minute at the open end, within the pump's operating range. Narrow hose adds friction quickly, so keep any 12.5 mm section as short as your reach allows.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eExpected performance\u003c\/h3\u003e\n\u003cp\u003eEstimated flow with the hose end fully open and no spray gun fitted:\u003c\/p\u003e\n\u003cdiv style=\"overflow-x: auto; -webkit-overflow-scrolling: touch; border: 1px solid #E5DED8; border-radius: 10px; margin: 22px 0;\"\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%; font-size: 14px; background: #ffffff;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\" scope=\"col\"\u003eHose run (19 mm)\u003c\/th\u003e\n\u003cth style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\" scope=\"col\"\u003eUphill lift\u003c\/th\u003e\n\u003cth style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\" scope=\"col\"\u003eEst. flow\u003c\/th\u003e\n\u003cth style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\" scope=\"col\"\u003eRemaining head\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003e25 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e2 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e67 L\/min\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e19.9 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003e25 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e5 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e64 L\/min\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e18.5 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003e30 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e2 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e63 L\/min\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e17.8 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003e30 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e5 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e61 L\/min\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e16.6 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size: 13px; color: #6b7280; line-height: 1.6; margin: 10px 0 0;\"\u003e\u003cem\u003eEstimated with the hose open and no spray gun fitted, using the published Divertron 900 curve and Hazen-Williams friction. \u003cstrong\u003eRemaining head\u003c\/strong\u003e is the pump's maximum head (45 m) minus the uphill lift minus the friction loss at that flow, roughly 10 m of head per bar. Actual performance varies with hose length, elevation, fittings and the spray gun.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"font-size: 13px; color: #6b7280; line-height: 1.6; margin: 10px 0 0;\"\u003e \u003c\/p\u003e\n\u003cp\u003eWith the gun closed, static pressure at the hose end rises to about 4.2 bar at 2 m of lift and 3.9 bar at 5 m. Maximum flow and maximum pressure do not happen together: with the hose open, flow is highest and pressure at the outlet is near zero; with the gun closed, flow is zero and pressure rises until the pump switches off. Normal spraying sits between the two, drawing on the remaining head shown above.\u003c\/p\u003e\n\u003ch3\u003eUsing a spray gun\u003c\/h3\u003e\n\u003cp\u003eA spray gun works by restricting the flow, and that restriction is what builds the pressure at the nozzle that gives spray reach and pattern. In doing so it reduces the flow rate below the open-hose figures above: pressure and flow trade off, so the tighter the spray setting, the higher the pressure and the lower the flow. What you get depends on the gun's bore, its flow setting, how far the trigger is opened and the spray pattern, and because spray-gun makers rarely publish full flow curves, an exact rate cannot be guaranteed for every gun.\u003c\/p\u003e\n\u003cp\u003eFor comparison, a typical UK outside tap gives roughly 10 to 15 litres per minute at 1 to 3 bar.\u003c\/p\u003e\n\u003cp\u003eThis kit delivers around 61 to 67 litres per minute through an unrestricted hose, at up to about 4.2 bar static, so it is a strong supply for hand watering. It suits hand-held spray guns, trigger nozzles, watering lances, jet, rose and filling attachments, and suitable washdown guns.\u003c\/p\u003e\n\u003ch3\u003eNot for oscillating sprinklers (as a plug-and-play kit)\u003c\/h3\u003e\n\u003cdiv style=\"margin: 26px 0; padding: 18px 22px; background: #FBF9F3; border: 1px solid #E5DED8; border-left: 4px solid #E8542B; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong style=\"color: #c8431d;\"\u003eBest used with a hand-operated spray gun or lance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eA sprinkler's low or fluctuating demand can make the Divertron's flow sensor think watering has stopped, so the pump cycles on and off, which can exceed its permitted starts per hour. The Divertron 900 can run a properly designed sprinkler or irrigation system, but the required flow, pressure and layout must be checked separately first.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eChoose your hose\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong data-start=\"312\" data-end=\"334\"\u003e30 m braided hose:\u003c\/strong\u003e The practical choice for everyday domestic garden watering. Lighter and more flexible, it is easier to handle, coil and route around borders, paths and obstacles, while providing an extra 5 metres of reach with only a modest reduction in estimated flow.\u003c\/p\u003e\n\u003cp data-start=\"21\" data-end=\"310\" class=\"PDq2pG_selectionAnchorContainer\"\u003e\u003cstrong data-start=\"21\" data-end=\"49\"\u003e25 m high-pressure hose:\u003c\/strong\u003e The tougher, harder-wearing option for frequent use, commercial applications and grounds maintenance. Its heavy-duty construction offers greater resistance to pressure, abrasion and general wear, while the shorter run provides a slightly higher estimated flow.\u003cspan aria-hidden=\"true\" class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy the DAB Divertron 900?\u003c\/h3\u003e\n\u003cp\u003eThe Divertron 900 brings the convenience of a domestic pressure system to a fully submersible pump. It sits quietly inside the well or tank and responds whenever the spray gun is opened, with no surface pump, external controller or pressure switch to install. Its multi-stage hydraulics deliver the pressure needed for spraying while keeping good flow through the large-bore hose. It is built from corrosion-resistant technopolymer with stainless-steel internals, with an IP68 motor, thermal and dry-run protection and an integrated non-return valve.\u003c\/p\u003e\n\u003ch3\u003eTechnical specification\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; -webkit-overflow-scrolling: touch; border: 1px solid #E5DED8; border-radius: 10px; margin: 22px 0;\"\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%; font-size: 14px; background: #ffffff;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\" scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\" scope=\"col\"\u003eDAB Divertron 900\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMaximum flow\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e100 litres per minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMaximum head\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e45 metres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMaximum pump pressure\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 4.5 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eRecommended operating range\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e\n\u003cp\u003e1 to 5.4 m³\/h\u003c\/p\u003e\n\u003cp\u003e(16.7 L\/min - 90 L\/min)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003ePump outlet\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e1 inch female BSP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMotor input power\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e920 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMotor rating\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e0.75 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eVoltage\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e230 V single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eFrequency\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e50 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eAutomatic cut-in pressure\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 2.4 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMaximum immersion depth\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e12 metres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMaximum permitted starts\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e20 per hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMotor protection\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eIP68\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eInsulation class\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eWater temperature\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e0°C to 35°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMaximum pump diameter\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e160 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003ePump height\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e596 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003ePump weight\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 11 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003ePower cable\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e15 metres with plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003eInstallation and water quality\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstall in clean water, fully submerged with at least 50 mm of water above the pump for cooling.\u003c\/li\u003e\n\u003cli\u003eIn a well, sit it at least 1 m above the bottom to avoid drawing in sand or silt.\u003c\/li\u003e\n\u003cli\u003eSupport the pump properly and never suspend or lift it by its electrical cable.\u003c\/li\u003e\n\u003cli\u003eAllow clearance around the 160 mm pump body.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"margin: 26px 0; padding: 18px 22px; background: #FBF9F3; border: 1px solid #E5DED8; border-left: 4px solid #E8542B; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0;\"\u003e\u003cstrong\u003eClean water only.\u003c\/strong\u003e Water containing sand, silt or abrasive material can damage the pump and invalidate the warranty. This kit is not for sewage, dirty or salt water, pond circulation or water features.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDoes the pump start automatically when I open the spray gun?\u003c\/h4\u003e\n\u003cp\u003eYes. The Divertron 900 has an integrated pressure switch and flow sensor. Opening the gun drops the pressure and starts the pump; closing it stops the pump after a short delay. There is nothing to switch on and off.\u003c\/p\u003e\n\u003ch4\u003eIs a spray gun included?\u003c\/h4\u003e\n\u003cp\u003eNo. The kit finishes in a genuine Hozelock Quick Connect fitting, so you can add any compatible spray gun, nozzle or lance you prefer.\u003c\/p\u003e\n\u003ch4\u003eCan I use my own 12.5 mm garden hose instead?\u003c\/h4\u003e\n\u003cp\u003eWe do not recommend it. Narrow garden hose sharply increases friction and would waste much of the pump's flow. The supplied 19 mm hose is what makes the kit perform.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"FPS Engineered™","offers":[{"title":"30m braided hose","offer_id":56352759906683,"sku":"DIV-900-KIT-HZLCK-1","price":454.67,"currency_code":"GBP","in_stock":true},{"title":"25m high-pressure hose","offer_id":56352759939451,"sku":"DIV-900-KIT-HZLCK-2","price":496.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/DAB_Divertron_Watering_Kit.jpg?v=1785740590"},{"product_id":"swimming-pool-drainage-pump-kit","title":"Swimming Pool Draining Pump Kit | Mizar 60 Submersible Pump","description":"\u003ch2\u003eSwimming pool drainage pump kit for emptying pools, spas and swim spas\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEmpties a domestic swimming pool at around 130 litres per minute, in water that would corrode an ordinary pump.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis FPS Engineered™ kit pairs the Mizar submersible pump with 10m of 32mm reinforced suction and delivery hose, a 32mm male hose tail and a stainless-steel clip. Lower the pump to the deepest point of the pool, run the hose to your discharge point and switch on.\u003c\/p\u003e\n\u003cp\u003eThe Mizar 60 is built from \u003cspan\u003e\u003cstrong\u003ehigh-grade\u003c\/strong\u003e \u003c\/span\u003e\u003cstrong\u003e304 stainless steel\u003c\/strong\u003e, which is the grade that resists chlorides. That matters here, because pool water is exactly the liquid that pits ordinary stainless steel and rusts cast iron. Even so, the pump must be rinsed through with fresh water after every use. Read more in our \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/blogs\/news\/chemical-resistant-pumps-materials-guide\"\u003eguide to chemical resistant pump materials\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003ePart of our wider \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/chemical-resistant-water-pumps\"\u003echemical resistant pump\u003c\/a\u003e range.\u003c\/p\u003e\n\u003ch3\u003eThis is a drainage pump, not a pool pump\u003c\/h3\u003e\n\u003cdiv style=\"margin: 28px 0; padding: 20px 24px; background: #F0EDE5; border-left: 4px solid #283583; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong\u003eTwo completely different jobs, two completely different pumps.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong\u003eCirculation and filtration pumps\u003c\/strong\u003e keep the water in the pool clean. They sit dry alongside the pool, draw water through a suction line, push it through the filter and return it. They are plumbed permanently into the pool's pipework, sized to turn the whole pool over every eight hours or so, and they run day in, day out against the back pressure of a filter. If your water has gone cloudy, your pump is noisy, or you are replacing an existing unit, that is what you need. Browse our \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/swimming-pool-pumps\"\u003eswimming pool pumps\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003e\u003cstrong\u003eDrainage pumps\u003c\/strong\u003e empty the pool. This one is submersible, portable and manually switched, and it discharges to waste rather than through a filter. You use it for a handful of hours once a season, to drop the level for repairs, to empty for winter, or to clear a pool that has been left standing. It cannot be plumbed into a filtration circuit and it will not replace your pool pump.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eAttended use only\u003c\/h3\u003e\n\u003cdiv style=\"margin: 26px 0; padding: 18px 22px; background: #FBF9F3; border: 1px solid #E5DED8; border-left: 4px solid #E8542B; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong style=\"color: #c8431d;\"\u003eThe Mizar 60 in this kit is manual. It has no float switch and will not stop on its own.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eThat is deliberate. A float switch would cut the pump off well before the pool was empty, which defeats the purpose. The trade-off is that you have to be there, and emptying a full pool is not a quick job. Budget several hours and check on it periodically.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eSwitch off at the plug once the water stops flowing. Running dry will damage the pump. Do not leave it running unattended or overnight.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAround 130 litres per minute:\u003c\/strong\u003e Through the 10 m of 32 mm hose supplied, at a typical 2 m lift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAISI 304 stainless steel:\u003c\/strong\u003e The grade that resists chlorides, so it handles chlorinated and salt-chlorinated water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10mm free passage:\u003c\/strong\u003e Passes leaves, grit and light debris from a pool that has been left standing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge-bore 32mm hose:\u003c\/strong\u003e Reinforced, so it holds its shape over the pool edge and up steps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse through after every use:\u003c\/strong\u003e Two minutes in clean water is all it takes, and it is what keeps the pump serviceable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Mizar 60 submersible pump, 230 V, manual, AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e1 × 10 m length of 32 mm reinforced suction and delivery hose\u003c\/li\u003e\n\u003cli\u003e1 × 32 mm male hose tail\u003c\/li\u003e\n\u003cli\u003e1 × stainless-steel hose clip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow the kit connects\u003c\/h3\u003e\n\u003cp\u003eThe Mizar 60 has a female 32 mm outlet. The supplied 32 mm male hose tail screws straight into it, and the hose pushes fully over the ribbed end of the tail and is secured with the stainless-steel clip. The far end of the hose runs open to your discharge point, so there is nothing to connect there.\u003c\/p\u003e\n\u003cp\u003eGet the discharge end lower than the water level in the pool if you can. Once the hose is full, gravity does some of the work for you, and on a long drain that is worth having. It also means that when you switch off, the water standing in the hose will run out rather than back into the pool.\u003c\/p\u003e\n\u003ch3\u003eExpected performance\u003c\/h3\u003e\n\u003cp\u003eEstimated flow through the supplied 10m of 32mm hose. Uphill lift is measured from the water surface to the point where the hose discharges, so most pools sit between 1 m and 3 m.\u003c\/p\u003e\n\u003cdiv style=\"overflow-x: auto; -webkit-overflow-scrolling: touch; border: 1px solid #E5DED8; border-radius: 10px; margin: 22px 0;\"\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%; font-size: 14px; background: #ffffff;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003eUphill lift\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003eEstimated flow\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003e20,000 litres\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003e40,000 litres\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003e1 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 138 L\/min\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 2.4 hours\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 4.8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003e2 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 130 L\/min\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 2.6 hours\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 5.1 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003e3 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 121 L\/min\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 2.8 hours\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 5.5 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003eHow long will my pool take?\u003c\/h3\u003e\n\u003cp\u003eWork out your volume in litres by multiplying length × width × average depth in metres, then multiplying by 1,000. Typical UK pools, at a 2 m lift:\u003c\/p\u003e\n\u003cdiv style=\"overflow-x: auto; -webkit-overflow-scrolling: touch; border: 1px solid #E5DED8; border-radius: 10px; margin: 22px 0;\"\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%; font-size: 14px; background: #ffffff;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003ePool\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003eApproximate volume\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003eEstimated time\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eAbove-ground, 12 ft round, 0.9 m deep\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e9,000 litres\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 1.2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eSmall in-ground, 6 × 3 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e22,000 litres\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 2.8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eTypical in-ground, 8 × 4 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e45,000 litres\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 5.8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eLarge in-ground, 10 × 5 m\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e75,000 litres\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eApprox. 9.6 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size: 13px; color: #6b7280; line-height: 1.6; margin: 10px 0 0;\"\u003e\u003cem\u003eEstimated using the published Mizar 60 curve and Hazen-Williams friction for 32 mm bore, with the hose discharging freely. Flow tails off as the level drops and the lift increases, so a deep pool takes slightly longer than the average figure suggests. Actual times depend on pool volume, lift, hose routing and any limit on how fast you can discharge. On a larger pool, plan the drain across two sessions rather than one very long one.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eTechnical specification\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x: auto; -webkit-overflow-scrolling: touch; border: 1px solid #E5DED8; border-radius: 10px; margin: 22px 0;\"\u003e\n\u003ctable style=\"border-collapse: collapse; width: 100%; font-size: 14px; background: #ffffff;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\" style=\"background: #283583; color: #fbf9f3; text-align: left; padding: 11px 14px; font-weight: 600;\"\u003eMizar 60\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eOperation\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eManual only, no float switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003ePump type\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003eSubmersible chemical resistant, clean and slightly dirty water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e\n\u003cspan\u003ehigh-grade \u003c\/span\u003e304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eOutlet\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e32 mm female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMotor power\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e0.45 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eVoltage\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e230 V single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMaximum flow\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e175 litres per minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eMaximum head\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e10 metres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eFree passage\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e154 × 154 × 234 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e5.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #FBF9F3;\"\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118; font-weight: 600;\"\u003eWarranty\u003c\/td\u003e\n\u003ctd style=\"padding: 11px 14px; border-top: 1px solid #E5DED8; color: #0c1118;\"\u003e2 years, manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003eHow to drain your pool\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStop dosing chemicals several days beforehand and let the chlorine or bromine level fall, then test it before you pump.\u003c\/li\u003e\n\u003cli\u003eCheck where the water is going and confirm it is allowed. See the discharge guidance below.\u003c\/li\u003e\n\u003cli\u003eLower the pump to the deepest point of the pool, clear of the main drain and away from any sediment on the floor.\u003c\/li\u003e\n\u003cli\u003eRun the hose to your discharge point, getting the open end as low as you can.\u003c\/li\u003e\n\u003cli\u003ePlug into an socket well clear of the water, keeping the plug dry and off the ground.\u003c\/li\u003e\n\u003cli\u003eSwitch on and monitor. Check on the discharge periodically and watch the level as it drops.\u003c\/li\u003e\n\u003cli\u003eSwitch off at the plug as soon as the flow stops. Do not let it run dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRinse the pump and hose through with clean fresh water before you put them away.\u003c\/strong\u003e This step is not optional. See below.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eRinse the pump through after every use\u003c\/h3\u003e\n\u003cdiv style=\"margin: 26px 0; padding: 18px 22px; background: #FBF9F3; border: 1px solid #E5DED8; border-left: 4px solid #E8542B; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong style=\"color: #c8431d;\"\u003eThis is the single most important thing you can do to keep the pump serviceable.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003eChlorine, bromine and salt do their damage over time, not in the few hours the pump is running. What causes problems is treated water left sitting inside the pump body and hose while it is in storage, where it concentrates as it evaporates and attacks seals, the shaft and eventually even 316 stainless. A pump put away wet after one drain can be pitted by the time you next need it.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong\u003eHow to do it.\u003c\/strong\u003e Stand the pump in a bucket, water butt or trug of clean fresh water, deep enough to cover the inlet, and run it for two or three minutes with the hose discharging to waste. That flushes fresh water through the impeller, the body and the full length of the hose. Then lift it out, let it drain fully, and store it dry with the hose uncoiled or loosely coiled so no water is trapped in it.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eDo the same after a saltwater pool, where it matters more. Corrosion damage caused by treated water left standing in the pump is not a manufacturing fault and is not covered by the warranty.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eWhere to discharge the water\u003c\/h3\u003e\n\u003cdiv style=\"margin: 26px 0; padding: 18px 22px; background: #FBF9F3; border: 1px solid #E5DED8; border-left: 4px solid #E8542B; border-radius: 8px;\"\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003e\u003cstrong style=\"color: #c8431d;\"\u003eA full pool is tens of thousands of litres of treated water. Where it goes matters.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003eChlorinated water must not reach a stream, river, ditch, pond or surface water drain. Chlorine is acutely toxic to fish and invertebrates, and a surface water drain in most cases discharges straight to a watercourse. Doing so can be an offence.\u003c\/p\u003e\n\u003cp style=\"margin: 0 0 10px;\"\u003eStop dosing several days before you drain and let the chlorine level fall, then test it. Levels below around 0.05 mg\/l are generally considered safe for the environment, and sunlight will bring an untreated pool down over a few days. A neutralising agent will do it faster.\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eThe foul sewer is normally the right destination, but a domestic connection cannot take 45,000 litres at 130 litres per minute without risk of backing up. Drain in stages, throttle the flow if you can, or spread the water slowly over your own grass or planted ground once dechlorinated. For salt-chlorinated pools, or anything above domestic scale, check with your water company before you start.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch4\u003eDo I really need to rinse the pump out after using it?\u003c\/h4\u003e\n\u003cp\u003eYes, every time. Treated water left standing inside the pump concentrates as it evaporates and attacks the seals and shaft, and given long enough it will pit even 316 stainless. Stand the pump in a bucket of clean fresh water and run it for two or three minutes with the hose discharging to waste, then let it drain and store it dry. Corrosion from treated water left inside the pump is not covered by the warranty.\u003c\/p\u003e\n\u003ch4\u003eWill this pump run my pool's filtration system?\u003c\/h4\u003e\n\u003cp\u003eNo. Filtration needs a surface-mounted circulation pump plumbed into the pool's pipework and sized to turn the water over against the resistance of your filter. This is a portable submersible pump for emptying to waste. See our \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/swimming-pool-pumps\"\u003eswimming pool pumps\u003c\/a\u003e for circulation and filtration.\u003c\/p\u003e\n\u003ch4\u003eHow long will it take to empty my pool?\u003c\/h4\u003e\n\u003cp\u003eJust under six hours for a typical 8 × 4 m in-ground pool, and about three hours for a small 6 × 3 m one. Multiply length × width × average depth in metres, then by 1,000, to get your volume in litres, and divide by 130 litres per minute.\u003c\/p\u003e\n\u003ch4\u003eDo I need any other fittings?\u003c\/h4\u003e\n\u003cp\u003eNo. The pump has a female 32 mm outlet and the kit supplies the matching male hose tail and clip, so it connects with nothing else to buy. If you later want to extend the run, you need a 32 mm hose joiner and a second clip, and every extra metre costs a little flow.\u003c\/p\u003e\n\u003ch4\u003eWhat happens when I switch the pump off?\u003c\/h4\u003e\n\u003cp\u003eThe water standing in the hose runs out, either forwards to your discharge point if that end is lower, or back into the pool if it is higher. It is around eight litres, which is nothing against a pool, so it makes no practical difference to the drain. Getting the open end of the hose low simply means it empties the right way.\u003c\/p\u003e\n\u003ch4\u003eCan I leave it running overnight?\u003c\/h4\u003e\n\u003cp\u003eNo. The pump is manual and will not stop when the water runs out, so it needs supervising. On a large pool, split the drain across two sessions rather than leaving it unattended.\u003c\/p\u003e\n\u003ch4\u003eIs it suitable for a saltwater pool?\u003c\/h4\u003e\n\u003cp\u003eYes for the duration of a drain. The 304 stainless construction resists chlorides which is why we chose it. Rinsing through afterwards matters even more with salt than with chlorine, because salt residue crystallises as it dries. For permanent duty in salt water, see our \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/salt-water-pumps\"\u003esalt water pumps\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eWill it get the pool completely empty?\u003c\/h4\u003e\n\u003cp\u003eIt will take the level down to the pump's minimum operating depth, which leaves a shallow film on the floor to be squeegeed or wet-vacuumed out. If you need a floor taken back to almost nothing, a \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/collections\/puddle-pumps\"\u003epuddle pump\u003c\/a\u003e clears down to a few millimetres.\u003c\/p\u003e\n\u003ch4\u003eCan I use it for a hot tub or spa instead?\u003c\/h4\u003e\n\u003cp\u003eYes, though it is more pump than a hot tub needs. Our \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/hot-tub-emptying-pump-kit?_pos=1\u0026amp;_psq=hot+tub\u0026amp;_psid=cbab93fa9\u0026amp;_ss=e\" title=\"hot tub draining kit\"\u003ehot tub kit\u003c\/a\u003e uses a smaller puddle pump with 6 m of hose and drains a typical tub in about 25 minutes.\u003c\/p\u003e\n\u003ch4\u003eDo you supply a 110 V version?\u003c\/h4\u003e\n\u003cp\u003eYes. A \u003ca href=\"https:\/\/floodandwaterpumps.co.uk\/products\/mizar-and-mizar-vox-submersible-pump\" title=\"110 volt mizar swimming pool draining pump\"\u003e110 V Mizar 60\u003c\/a\u003e is available for site and hire use. Call the helpdesk on 0115 987 0358.\u003c\/p\u003e","brand":"FPS Engineered™","offers":[{"title":"Default Title","offer_id":56365065208187,"sku":"MIZAR-60-KIT-POOL-1","price":366.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/files\/Heavy_duty_Mizar_swimming_pool_draining_pump_kit.jpg?v=1785871372"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0845\/0857\/4015\/collections\/Manual_SPK530_Puddle_Pump_for_trade_and_hire_3.jpg?v=1787913989","url":"https:\/\/floodandwaterpumps.co.uk\/collections\/facilities-pumps.oembed?page=3","provider":"Flood \u0026 Water Pumps","version":"1.0","type":"link"}