Reasons to buy the LSC Pump:
- Puddle pump or sucker
- Pumps as low as 1mm
- Ultra hard wearing
- Operate for extended periods with little or no water
- Used widely by hire, utilities and water companies
- Portable or fixed installations
- Choose between manual or automatic
- 3 year warranty
✅Next Day Delivery
What's in the box:
- 1x LSC Pump
- 1x 10m Heavy duty rubber power cable
- 1x Hose tail
TSURUMI are the manufacturer of the LSC1.4S puddle sucking pump. The manufacturer offers a 3-year product guarantee as standard, giving the added reassurance that you will get a product that is built to last.
Aptly named the puddle-sucker, the LSC1.4S is capable of pumping water down to just 1mm, making it the perfect choice of pump if you are looking to pump either big or small areas of water that can be found on flat surfaces. The common applications for the LSC1.4S puddle sucker are hire fleets, flood control, lift shafts, fixed installations, utilities and in construction.
Due to the design, and the dual-position outlet port, the outlet hose for this pump can be positioned vertically or horizontally. During robust handling, and for additional sturdiness, the outer casing is made from pressed steel and a pump stand made with cast aluminium. The puddle sucker pump delivers its promise of extreme reliability and high performance. To prevent the back-flow of water coming from the discharge hose, there is an integral swing check valve included.
This pump can comfortably operate for prolonged periods of time with very little, or no water at all due to the air and water cooling route to the top outlet.
The pump can be supplied as a manual or automatic models.
For fixed installations the SwitchH20 and Panel is recommended. This consists of 3 probes in 304 stainless steel. It is supplied with a control panel and 10m of cable. It allows automatic pumping down to 5mm.
For portable use, the Sensor is recommended This is an electronic float switch with 2 stainless steel probes. They are encapsulated in an impact resistant moulded rubber. This can still be used for fixed installations or narrow sumps. As an optional extra, extension probes are available to enable pumping down between 85mm and circa 1mm. The extensions are an optional extra and available here: 170mm Sensor Extension Probes.
When the probes touch water, the pump will start and continue to operate for one minute after the water falls below it. However, if the water touches the probe within this time, the “stop” signal is cancelled and the pump continues to run until the water is cleared.
Please note: As standard we supply 25mm outlets. Please select 50mm if you require a 50mm outlet.
Our Clients Include:
"The LSC1.4S is small, quiet and extremely robust. I can't believe the speed and efficiency with which it cleared the patio. I would wholeheartedly recommend both the company and the product." -Philippa
The image shown is representative of the product range and may not reflect the actual product chosen.
Please see below the technical specification for the LSC1.4S
We bought the LSC with H20 and Panel for an automatic set up in our basement. Build quality is second to none and very effective
I needed a strong pump to pump to as low as possible. This pumped to 1mm amazing
Our patio continually floods due to poor drainage, but I didnt really know where to start. After a good deal of research and viewing videos on YouTube, I thought I might need a puddle pump. I then called Jonathan at Flood Protection Solutions. He was brilliant at asking what the problem was and what ideally we would need. He recommended the LSC1.4s pump as it pumps water away down to 1mm. The pump is small, quiet and extremely robust. I can't believe the speed and efficiency with which it cleared the patio. I would wholeheartedly recommend both the company and the product.
The LSC1.4S is small, quiet and extremely robust. I can't believe the speed and efficiency with which it cleared the patio. I would wholeheartedly recommend both the company and the product.