Evak Agivort Submersible Slurry Water Pump

Evak Agivort Submersible Slurry Pump | Agitator Pump for Slurry, Construction and Dewatering

The Evak Agivort is a heavy-duty submersible agitator pump designed for arduous slurry handling on construction sites, in hire fleets, and across utilities and drainage operations. The built-in 316 stainless steel agitator keeps settled solids in suspension as the pump runs, allowing it to clear sites more thoroughly than a standard submersible drainage pump. Four models are available from the 5.05 up to the 5.50, covering 230V single phase and 400V three phase.

What is the Evak Agivort Pump used for?

•    Construction site dewatering where water contains silt, grit and slurry
•    Pumping slurry, sludge and heavily loaded water
•    Hire fleet and plant rental operations
•    Utilities and infrastructure drainage projects
•    Flood response and emergency dewatering
•    Agricultural drainage

Construction and Durability

The Agivort is built primarily from FC200 cast iron for impact resistance and long service life, with a heavy-grade 304 stainless steel motor housing. The 316 stainless steel agitator resists corrosion in slurry and heavy media. A double mechanical seal protects the motor shaft, supported by an oil chamber with NBR oil seal. Single-phase models include an internal capacitor, so no separate capacitor box is required on site.

Why choose the Evak Agivort Pump?

Most submersible drainage pumps struggle with settled slurry because the solids are too dense to enter the inlet without agitation. The Agivort solves this by continuously stirring the material around the pump as it runs, keeping solids in suspension and allowing the pump to clear a site more completely. The cast iron build and double mechanical seal make it well suited to the rough handling of hire fleet use, and the range of four models from 5.05 to 5.50 covers everything from lighter 230V site drainage up to demanding 400V industrial slurry work.

Operational Details

•    Available models: Agivort 5.05 (230V Auto), 5.10 (230V Auto or 400V Manual), 5.20 (230V Auto or 400V Manual), 5.50 (400V Manual)
•    Pump body: FC200 cast iron
•    Motor housing: 304 stainless steel
•    Agitator: 316 stainless steel
•    Seals: double mechanical seal with oil chamber and NBR oil seal
•    Single-phase models: internal capacitor fitted as standard
•    Please refer to the technical data sheet for flow rate, head and power specifications by model

What's in the box

•    1 x Evak Agivort pump
•    10m heavy-duty power cable
•    Hose tail