Connections

Hose Tails, Connectors & Clips

Connect hoses to pumps, pipework or each other with the right fitting for the job. Our range covers BSP hose tails in brass, polypropylene and nylon, cam lock couplings (parts A, C, D and E), quick release fittings, lever lock couplings ...

Products in range 20
From £1.16£0.97 (Exc VAT)
Delivery Next day
Rating ★ 4.6
20 products
Tsurumi

Cam coupling c/w hose tail - part C

  • Extending a discharge run, click on another length of layflat hose instead of building a new joint
  • Joining rigid suction and delivery hose to layflat on the delivery side
  • Site pumping where the pump is moved repeatedly through a shift
  • Hire fleets and pump kits, where hoses need to be interchangeable
  • Tanker and IBC transfer
£7.08 £5.90 (Exc VAT)
Only 2 left
View
Tsurumi

Cam adaptor c/w hose tail - part E

  • Male cam adaptor with hose tail, the half that clicks into a Part C
  • Pairs with a Part C for hose to hose, or a Part D on a threaded pump outlet
  • Four sizes: 25mm (1 inch), 50mm (2 inch), 75mm (3 inch), 100mm (4 inch), sized to hose internal bore
  • Fit it to an extension hose to click extra length onto a run you have already made up
£3.88 £3.23 (Exc VAT)
In stock
View
Tsurumi

Cam adaptor c/w female BSP - part A

  • Male cam adaptor with a female BSP thread, screws onto a male threaded pump outlet
  • Pairs with a Part C on the hose, connecting and releasing by hand with no tools
  • No arms, pins or gasket, so it is the simplest and lowest cost way to convert a pump outlet
  • Fit it once and leave it, the pump is then ready for any hose in your kit
£3.58 £2.98 (Exc VAT)
In stock
View
Tsurumi

Cam coupling c/w female BSP - part D

  • Female cam coupler with a female BSP thread, screws onto a male threaded pump outlet
  • Pairs with a Part E on the hose, so connections are made by hand with no tools
  • Available in 25mm (1 inch), 50mm (2 inch), 75mm (3 inch), 100mm (4 inch)
  • Keeps the arms and gasket on the pump rather than on hose ends that get dragged about
£6.66 £5.55 (Exc VAT)
In stock
View
Make the connection

Connecting a pump to a hose.

The fittings that join your pump outlet to a hose, and keep it secure under pressure.

What you need

Hose tails connect a threaded pump outlet to a flexible hose, in brass or polypropylene with male or female BSP threads. Cam-lock couplings give a fast, tool-free connection for site use, and hose clips and clamps hold everything tight under pressure. Match the BSP thread to your pump outlet and the tail size to your hose bore.

Brass or polypropylene

Brass tails are tougher and handle heat and heavy use; polypropylene is lighter, cheaper and corrosion-proof for clean and waste water. For longer runs, pair these with our hoses, and add a non-return valve on the discharge if needed.

Advice & insight

Knowledge & Insights

Cam adapter and coupler with layflat hose Technical Guidance
Technical Guidance

Camlock Fittings Explained: Which Cam Coupling Part Do You Need?

Camlocks join hoses in seconds with no tools, but the Part A, C, D and E naming stops most people ordering the right one. Here is what each letter means, whi...

By Claire Sneddon · Updated Aug 2026
Common questions

Frequently asked questions.

What size hose tail do I need?

Match two things: the BSP thread on your pump outlet (for example 1 inch, 1.5 inch or 2 inch) and the bore of your hose. The tail steps the thread down to the hose size.

What is a cam coupling?

A cam-lock coupling is a quick-release connector with two lever arms. It lets you join and separate hoses by hand in seconds, with no tools, which is ideal on site.

Brass or polypropylene hose tails?

Brass for durability, heat and heavy use; polypropylene for lower cost and corrosion resistance on clean or waste water. Both seal on a BSP thread.