Floodshield Door Flood Barrier
Built for the job
Award-Winning Removable Flood Door Barrier Fitted Without Tools or Fixtures
PLEASE NOTE - This product currently has a 3 week despatch time from the supplier
The Floodshield door barrier simply clips to and seals against the flat outside surface your door frame, requiring no tools to fit, nor needing any permanent attachments to your home. Coming in six standard sizes fitting almost all inward opening doors, the barrier has been extensively tested by world leading flood experts, and by customers in their own homes.
PLEASE NOTE, next day delivery is NOT available on this item.
- Comes ready to use straight out the box
- Fitted in minutes
- No tools required
- No fixtures or alterations
- Cannot be stolen once the door is closed
- 6 standard widths
- Designed to last
- Performance tested
- 2 year manufacturer's guarantee
Tested in a purpose built flood simulation station as well as real flood situations. The award winning Floodshield door barrier simply clips by hand and seals against the frame of your existing door. It is fitted in minutes without the need for tools, permanent fixtures, or alterations to your property.
How to Measure:
Floodshield comes in 6 standard sizes, fitting nearly all inward opening residential doors. The barrier height is approx 580mm.
| Width/mm | Width/ inches | |
| Size 1 | 780 | 30.75 |
| Size 2 | 830 | 32.75 |
| Size 3 | 880 | 34.5 |
| Size 4 | 910 | 35.75 |
| Size 5 | 930 | 36.5 |
| Size 6 | 980 | 38.5 |
Measure for a Floodshield barrier between the brickwork, as shown in measurement A below (overall width of door frame).
Choose the Floodshield size which is nearest to, but not larger than measurement A to allow the barrier to clip to and seal against the outside surface of the doorframe. When the barrier is in place it should overlap onto the doorframe a minimum of 1.5" (38mm) each side.
Floodshield Seal Types
There are two options of seal for the Floodshield barrier. One for standard door frames, and one for uPVC door frames.
The Floodshield for standard door frames seals to the frame and down onto the step, whether concrete, stone or timber.
Delivery
PLEASE NOTE, next day delivery is NOT available on this item. Delivery is expected to be circa 2-5 working days from stock.
Full spec sheet
No spec data found. ESC Size Charts will auto-populate when this product is tagged with one of the chart keys (e.g. 2AL, 2C(M), 50PNI) in the ESC dashboard. Alternatively, add JSON metafields under
specs.performance, specs.electrical, specs.build, and specs.support
to populate this table directly.
How the buried sump chamber clears water
Cross-section of a sealed MDPE sump with an automatic submersible pump and arm float switch. Watch one full cycle below.
Water collects
Rainwater or seepage flows in via the gravity inlet and pools at the bottom of the buried chamber.
Float arm rises
As the level climbs, the arm float lifts. At the trigger height it closes the switch contact.
Pump discharges
The Ama-Drainer N 301 powers up, lifting water through the riser and out to the sewer.
Cut-out at low level
The arm drops as water clears. The switch opens and the pump rests until the next cycle.
Water
Foul or surface water collected from the gravity inlet at the side of the chamber.
Pump
Submersible Ama-Drainer N 301, switched by the float arm.
Trigger
Arm float switch closes the circuit at the high-water mark and opens at cut-out.
Chamber
Robust MDPE shell with flanged base to anchor against buoyancy and ground movement.
