Hose clip/ jubilee clip. Available in a wide range of sizes.
Suitable for securing a hose to water pump hose tail.
Please ensure you select the correct size when ordering. Select a clip where your pump outlet is within the size range (e.g for a 50mm outlet, choose a 40-60mm clip).
No spec data found. ESC Size Charts will auto-populate when this product is tagged with one of the chart keys (e.g. 2AL, 2C(M), 50PNI) in the ESC dashboard. Alternatively, add JSON metafields under
specs.performance, specs.electrical, specs.build, and specs.support
to populate this table directly.
Cross-section of a sealed MDPE sump with an automatic submersible pump and arm float switch. Watch one full cycle below.
Rainwater or seepage flows in via the gravity inlet and pools at the bottom of the buried chamber.
As the level climbs, the arm float lifts. At the trigger height it closes the switch contact.
The Ama-Drainer N 301 powers up, lifting water through the riser and out to the sewer.
The arm drops as water clears. The switch opens and the pump rests until the next cycle.
Foul or surface water collected from the gravity inlet at the side of the chamber.
Submersible Ama-Drainer N 301, switched by the float arm.
Arm float switch closes the circuit at the high-water mark and opens at cut-out.
Robust MDPE shell with flanged base to anchor against buoyancy and ground movement.
Floodandwaterpumps.co.uk has been specially designed to simplify the types of pumps into categories to make choosing the best pump for your requirements easy.
We are often asked how to attach the hose to a pump, and have created this 'how-to' video to demonstrate. The pump and accessories listed are all available at floodandwaterpumps.co.uk
