EGO 500 SELS Automatic Puddle Pump

The EGO 500 SELS submersible puddle pump is perfect to use in narrow sumps and chambers and with low water levels. The pumps feature an adjustable electronic start/stop sensor. These can be set to allow pumping as low as 1mm. 

Factory Settings:
The EGO 500 SELS is set up from the factory to turn on at 125mm and off at 40mm. The on level is adjustable down to 15mm, and off level to a few mm. Note, the pump runs for a short while after the water level has dropped below the off level, enabling low level pumping down to a mm. However to help prevent it running dry, the off level should be set no lower than 3-5mm.

The EGO500 SELS has a 0.47kW motor. 

The pump is suitable for pumping clean or slightly polluted water. It is constructed from thermoplastic with specialist 304 stainless steel motor casing. It has a triple seal that gives it a superior resistance to wear.

The EGO 500 SELS submersible puddle pump can also be used when only partially submerged. It has a top outlet design, which allows cooling of the motor. It has a great level of performance in both domestic and light industrial applications. It is highly dependable. However it is not recommended to use the EGO500 for pond or water features.

The EGO 500 SELS puddle pump is supplied with 10m of heavy duty power cable.

• Built-in thermal protection with auto reset
• Suitable for continuous duty up to 35°C
• Supplied with non return valve and variable hosetail as standard

What's in the box:

• 1x EGO500 SELS Pump
• 1x 10m Heavy duty rubber power cable
• 1x Hose tail