Pickup available at Warehouse - Epperstone, Nottingham (NG14 6AT) (NG14 6AT)
Usually ready in 1 hour
View store informationOur 50mm (2 inch) layflat hose is the discharge size we sell most, because 2 inch is the outlet fitted to the majority of site dewatering submersibles and flood response pumps. At 0.22 kg per metre, a full 100m coil weighs about as much as a bag of cement, so one operative can run discharge from an excavation to an outfall that a rigid hose would need two people and several joins to reach.
The yarn reinforced PVC wall handles 3.5 bar, comfortably within the head produced by typical 2 inch site pumps, and the hose drags cleanly over grass, hardstanding and mud. When the pumping stops it rolls flat for the van, taking a fraction of the rack space of rigid hose. For the suction side of surface pumps, or discharge runs that must be buried or bent hard, use our 50mm suction and delivery hose. Coils from 6m to 100m.
Lay flat hose has a maximum working temperature of 60° and a minimum of -15°C
An elbow hose tail can help reduce kinking on vertical discharge water pumps.
| Nominal size | 50mm |
|---|---|
| Inch equivalent | 2 inch |
| Actual internal bore | 51mm |
| Outside diameter | 54.3mm |
| Wall thickness | 1.15mm |
| Working pressure | 3.5 bar |
| Burst pressure | 10.5 bar |
| Weight per metre | 0.220 kg/m |
| Coil lengths | 6, 10, 20, 30, 50, 100mtrs |
No spec data found. ESC Size Charts will auto-populate when this product is tagged with one of the chart keys (e.g. 2AL, 2C(M), 50PNI) in the ESC dashboard. Alternatively, add JSON metafields under
specs.performance, specs.electrical, specs.build, and specs.support
to populate this table directly.
Floodandwaterpumps.co.uk has been specially designed to simplify the types of pumps into categories to make choosing the best pump for your requirements easy.
We are often asked how to attach the hose to a pump, and have created this 'how-to' video to demonstrate. The pump and accessories listed are all available at floodandwaterpumps.co.uk
