SEARCH

Results for "suction delivery"

86 results

FPS Engineered

Camlock Adaptor Part E, Hose Tail | 25mm to 100mm

  • Male cam adaptor with hose tail, the half that clicks into a Part C
  • Pairs with a Part C for hose to hose, or a Part D on a threaded pump outlet
  • Four sizes: 25mm (1 inch), 50mm (2 inch), 75mm (3 inch), 100mm (4 inch), sized to hose internal bore
  • Fit it to an extension hose to click extra length onto a run you have already made up
£3.88 £3.23 (Exc VAT)
In stock
View
FPS Engineered

Braided Suction Hose 30mm Outlet

  • 1¼" bore (30mm internal diameter)
  • Largest braided size, maximum flow
  • For large pond, aquaculture and commercial filtration
£119.00 £99.17 (Exc VAT)
In stock
View
FPS Engineered

Braided Suction Hose 13mm Outlet

  • ½" bore (12.5mm internal diameter)
  • Highest pressure braided size at 12 bar
  • Clear wall for aquariums and dosing lines
£17.00 £14.17 (Exc VAT)
In stock
View
Stream

Stream SPK530A Automatic Heavy Duty Puddle Sucker Pump

  • Automatic crab floor sensor starts at 20 mm and stops at 10 mm
  • 170 litres per minute to 11 m head for basements, sump pits and site dewatering
  • Cast iron casing and polyurethane vortex impeller resist sand and silt
  • Rotatable 25 mm discharge outlet for vertical or horizontal pumping
£358.80 £299.00 (Exc VAT)
In stock
View
FPS Engineered★ 5.0

Small Flood Pump Kit | SPP2 Puddle Pump

  • Complete pump kit: Includes the pump, hose and accessories
  • 70 litres per minute, 6 m maximum head. Clears roughly 3,000 litres an hour at typical lift.
  • Pumps down to approximately 2 mm and 3 mm free passage for grit and light debris.
  • Manual operation, attended use only. 12, 19 & 25 mm hose outlets
£154.30 £128.58 (Exc VAT)
Only 3 left
View
Tsurumi

Residue Pumping Kit - Floor Tool and 4 m Suction Hose - Pumps to 3mm

  • Clears standing water down to 3 mm where a standard strainer leaves several inches
  • Move it from puddle to puddle with the engine running, no stopping and re-priming
  • Fits Honda WX10, Tsurumi TEM-25H and TE2-25H, the 25 mm ported petrol pumps
  • No mains power needed, which is the point of working off a petrol pump
£188.40 £157.00 (Exc VAT)
In stock
View
FPS Engineered

Petrol Water Transfer Pump Kit | Honda WX10

  • Both hoses included. The pump alone comes without them, and it will not prime without a proper suction line.
  • 113 litres per minute through the kit. Roughly 6,800 litres an hour at typical lift.
  • 6.1 kg, one-handed carry. The lightest pump in Honda's petrol range, with a GX25 4-stroke engine.
  • 36 metres of head. Enough to push water a long way uphill, not just across a yard.
£451.99 £376.66 (Exc VAT)
In stock
View
FPS Engineered★ 5.0

190 Litre Grey Water Pump Station, 6.5m head | FPS Iguazu 635

  • Complete packaged pump station for grey, clean, surface and flood water
  • Max Flow 166 L/min
  • Max head 6.5m
  • 190 litre chamber, a popular choice for Type C basement waterproofing and flood control
  • Supplied ready to install: pump, internal pipework + non-return valve
£528.00 £440.00 (Exc VAT)
In stock
View
FPS Engineered

Automatic Commercial basement, Site & Plant Room Pump Kit | SPK530A

  • Around 5,650 litres an hour at a 3m lift through the hose supplied
  • 11m of head, reaching street level from a deep basement, still moving water at 9m
  • No control panel, no wiring, no commissioning, so no electrician and no lead time
  • Clears to 10mm on automatic, lower than any other automatic pump we sell
  • Cast iron casing and polyurethane vortex impeller, built for gritty plant room water
£429.07 £357.56 (Exc VAT)
In stock
View
Guides & articles 2
BROWSE BY CATEGORY

Or browse the catalogue right kind of pump

Pumps are not one-size-fits-all. Pick the category that matches your problem, and we'll narrow it down.

STILL CAN'T FIND IT?

Not sure which pump you need? Our UK-based team can help.

Tell us what you're pumping, how shallow, and what power's available. We'll match it from our full range.