Tsurumi TDS Petrol Trash Pump | High-Flow Dirty Water Pump
Built for the job
Tsurumi TDS Petrol Trash Pump | Honda Powered Engine Pump for Construction and Site Drainage
The Tsurumi TDS petrol trash pump is a Honda powered, self priming engine pump built to shift dirty water on construction sites, hire fleets, drainage works and flood response jobs. Available as the 2 inch TDS-50HA and 3 inch TDS-80HA, the TDS range delivers reliable performance where mains power is not available and where the water carries grit, silt and small debris.
What is the Tsurumi TDS pump used for?
• Site dewatering on construction and civils projects
• Hire fleets and contractor dewatering
• Drainage and utilities work
• Pumping water containing suspended solids up to 20 mm
• Flood response in locations without mains power
• Filling and emptying tanks where high flow is required
Construction and Durability
The TDS range is built around a Honda OHV petrol engine housed in a robust steel roll frame fitted with anti vibration rubbers, protecting the pump head during transport and on rough ground. The semi trash design uses elongated bolts through the pump housing so the casing can be opened quickly for inspection or to clear blockages. Tsurumi engineering means the pump is built to last on demanding sites, and the Honda Oil Alert system shuts the engine down to protect it if the oil level drops too low. The semi-trash design passes solids up to 20 mm. The pump body is cast aluminium, with a grey cast iron volute and impeller and a silicon carbide mechanical seal.
Why choose the Tsurumi TDS?
Tsurumi has built its reputation on heavy duty submersible and engine pumps that survive years of hire fleet use. The TDS gives contractors a self priming pump with high flow, reliable Honda starting and a service friendly design where the impeller and volute can be reached without specialist tools. The maximum recommended suction lift is 6 metres, and all the everyday accessories you need to put the pump to work are included in the box. If you want a workhorse trash pump that earns its keep on hire and project sites, the TDS is a strong choice.
Specification
| Model | Inlet / outlet | Engine | Max flow | Max head | Solids | W x L x H | Dry weight |
|---|---|---|---|---|---|---|---|
| TDS-50HA | 50 mm (2 inch) | Honda GX120, 4 hp | 780 L/min | 23 m | 20 mm | 345 x 470 x 420 mm | 24 kg |
| TDS-80HA | 75 mm (3 inch) | Honda GX160, 5.5 hp | 1,150 L/min | 23 m | 20 mm | 370 x 525 x 420 mm | 27 kg |
| Detail | Value |
|---|---|
| Pump type | Self-priming centrifugal semi-trash pump |
| Fuel | Unleaded petrol, recoil start |
| Engine protection | Honda Oil Alert low oil shutdown |
| Pump body | Cast aluminium |
| Volute and impeller | Grey cast iron |
| Mechanical seal | Silicon carbide |
| Maximum recommended suction lift | 6 m |
| Frame | Tubular steel with rubber feet |
What's in the box
• 1 x Tsurumi TDS pump
• Hose couplings, sealing washers and hose clips
• Suction strainer
• Manufacturer documentation
Full spec sheet
| Model | TDS-50HA | TDS-80HA |
|---|---|---|
| Inlet/ mm | 50 | 75 |
| Outlet/ mm | 50 | 75 |
| Engine | GX120 | GX160 |
| Fuel | Petrol | Petrol |
| Oil Alert | Yes | Yes |
| HP | 4 | 5.5 |
| Flow ltr/min | 780 | 1150 |
| Head /m | 23 | 23 |
| Free Passage | 20 | 20 |
| W x L x H /mm | 345 x 470 x 420 | 370 x 525 x 420 |
| Weight /Kg | 24 | 27 |
Flow through hose
Litres per minute with a 2 m lift, through layflat hose. A guide for comparison.
| Model | 1 m | 25 m | 50 m | 100 m | 150 m | 200 m | Max recommended suction lift |
|---|---|---|---|---|---|---|---|
| Tsurumi TDS-50HA | 780 | 590 | 475 | 375 | 300 | 275 | 6 m |
| Tsurumi TDS-80HA | 1,150 | 1,000 | 900 | 800 | 680 | 600 | 6 m |
