Our 38mm (1½ inch) layflat hose matches the 1½ inch outlets on mid size submersible and dirty water pumps, giving you a noticeably higher flow than the domestic bores while staying light enough that a 30m coil carries in one hand. The woven yarn reinforcement keeps the wall stable at its 3.5 bar working pressure, so flow stays consistent over long ground level runs.
Typical jobs include emptying garden ponds and hot tubs, transferring water between tanks and butts, and clearing surface water from patios and outbuildings where the discharge point is some distance away. It is a delivery hose by design and folds when forced over edges or obstacles, so for buried runs or lifts out of deep sumps, our 38mm suction and delivery hose is the better companion. Coils from 6m to 100m.
Lay flat hose has a maximum working temperature of 60° and a minimum of -15°C
| Nominal size | 38mm |
|---|---|
| Inch equivalent | 1½ inch |
| Actual internal bore | 38mm |
| Outside diameter | 40.3mm |
| Wall thickness | 1.15mm |
| Working pressure | 3.5 bar |
| Burst pressure | 10.5 bar |
| Weight per metre | 0.210 kg/m |
| Coil lengths | 6, 10, 20, 30, 50, 100mtrs |
No spec data found. ESC Size Charts will auto-populate when this product is tagged with one of the chart keys (e.g. 2AL, 2C(M), 50PNI) in the ESC dashboard. Alternatively, add JSON metafields under
specs.performance, specs.electrical, specs.build, and specs.support
to populate this table directly.
Floodandwaterpumps.co.uk has been specially designed to simplify the types of pumps into categories to make choosing the best pump for your requirements easy.
We are often asked how to attach the hose to a pump, and have created this 'how-to' video to demonstrate. The pump and accessories listed are all available at floodandwaterpumps.co.uk
