Our 80mm (3 inch) layflat hose puts serious discharge capacity on the delivery port of 3 inch construction pumps and petrol or diesel engine driven units. The 76mm bore passes high flows with minimal restriction, and the yarn reinforced wall holds its 3.5 bar rating without swelling, so the pump's output arrives at the outfall rather than being lost along the way.
It earns its keep wherever big volumes move across open ground: construction dewatering, flood water transfer across fields and yards, and hire fleets where hose gets issued, used hard and re-coiled weekly. Note that engine driven pumps still need a rigid hose on their suction side; pair this layflat with our 80mm suction and delivery hose to complete the set. Coils from 6m to 100m.
Lay flat hose has a maximum working temperature of 60° and a minimum of -15°C
| Nominal size | 80mm |
|---|---|
| Inch equivalent | 3 inch |
| Actual internal bore | 76mm |
| Outside diameter | 78.4mm |
| Wall thickness | 1.2mm |
| Working pressure | 3.5 bar |
| Burst pressure | 10.5 bar |
| Weight per metre | 0.350 kg/m |
| Coil lengths | 6, 10, 20, 30, 50, 100mtrs |
No spec data found. ESC Size Charts will auto-populate when this product is tagged with one of the chart keys (e.g. 2AL, 2C(M), 50PNI) in the ESC dashboard. Alternatively, add JSON metafields under
specs.performance, specs.electrical, specs.build, and specs.support
to populate this table directly.
Floodandwaterpumps.co.uk has been specially designed to simplify the types of pumps into categories to make choosing the best pump for your requirements easy.
We are often asked how to attach the hose to a pump, and have created this 'how-to' video to demonstrate. The pump and accessories listed are all available at floodandwaterpumps.co.uk
