Why Choose the Hippo 150?
The Hippo 150 is a heavy‑duty submersible sewage and dirty water pump that sits between the Hippo 100 and Hippo 200. Its 1.1kW motor gives noticeably more flow and lift than the Hippo 100, for domestic and light‑commercial systems where the discharge point is higher or further away, without stepping up to the larger Hippo 200.
Like the rest of the Hippo range, it offers full 2" (50mm) solids handling and robust construction without the complexity or cost of grinder or cutter pumps.
Common Applications
The Hippo 150 is suitable for:
- Domestic sewage pumping stations
- Septic tanks and cesspits
- Soiled wastewater, sewage and rainwater chambers
- Light commercial installations
- Site drainage and utility pumping
The vortex impeller allows the pump to handle sewage and solids confidently while reducing the risk of blockages.
Solids Handling & Pump Performance
- Handles solids up to 50mm (full 2" free passage)
- Vortex impeller for improved anti‑clog performance
- Maximum flow rate: up to 580 litres per minute
- Maximum head: up to 12.5 metres
- Duty point: 390 litres per minute at 8 metres head
Power Supply & Model Options
- 230V single‑phase automatic – pendant float switch fitted as standard
- 230V single‑phase manual – for use with a separate float switch or level control panel
- 400V three‑phase manual – for use with a separate float switch or level control panel
Technical Specification
| Motor |
1.1kW (1.5HP), 2‑pole, 2850 rpm, 50Hz |
| Full load current |
9A (230V single‑phase) / 2.8A (400V three‑phase) |
| Maximum flow |
580 L/min |
| Maximum head |
12.5m |
| Duty point |
390 L/min at 8m |
| Discharge |
2" (50mm) – vertical PT female thread, or horizontal flange (Q version) |
| Free passage |
50mm |
| Max submersion depth |
10m |
| Max liquid temperature |
40°C |
| Protection |
IP68, Class F insulation |
| Motor protection |
Thermal protector (single‑phase), overload protector (three‑phase) |
| Cable |
10m H07RN‑F |
| Weight (without cable) |
24.2kg vertical / 26.2kg horizontal (Q) |
| Dimensions (vertical) |
272mm long × 187mm wide × 506mm high |
| Dimensions (horizontal Q) |
248mm long × 190mm wide × 510mm high |
Design, Construction & Reliability
Built for arduous environments, the Hippo 150 features:
- EN‑GJL‑200 cast iron pump casing, impeller and motor cover
- AISI 304 stainless steel motor housing and AISI 410 stainless steel shaft
- EKK Eagle Burgmann double mechanical seal (upper Ca/Ce, lower SiC/SiC)
- Oil chamber with NBR lip seal for protection from solids
- Watertight cable gland with epoxy potting
- Long‑life NTN ball bearings
- Supplied with 10m H07RN‑F heavy‑duty submersible power cable
Horizontal or Vertical Discharge Options
The standard Hippo 150 has a vertical 2" threaded outlet for pumps standing on the chamber floor. The Hippo 150Q has a horizontal flanged outlet and suits the QH coupling foot for guide‑rail installations.
The Right Size for Longer Runs
The Hippo 150 is the practical choice when the Hippo 100 would be working at the top of its curve but the Hippo 200 is more than the job needs. Sewage pumps last longest working in the middle of their curve, so picking the right size pays off in reliability.
What’s in the box
- 1 × Hippo 150 Submersible Sewage Pump
- 1 × 10m heavy‑duty rubber power cable
Please note: the hosetail connector is not included.
Images are indicative and may not represent the exact model supplied.