The Hippo 200 is a heavy‑duty submersible sewage and dirty water pump designed for more demanding domestic and light‑commercial applications. Offering higher flow and head performance than the Hippo 100, it delivers dependable solids handling and robust construction without the complexity or cost of grinder or cutter pumps.
Ideal where greater pumping capacity is required, the Hippo 200 provides a practical, no‑nonsense solution for foul water and sewage systems.
The Hippo 200 is suitable for:
The recessed vortex impeller allows the pump to handle sewage and solids confidently while reducing the risk of blockages.
This higher performance profile makes the Hippo 200 well suited to larger domestic systems and installations requiring increased lift or flow capacity.
These limits comfortably cover typical domestic sewage conditions and most pumping chamber depths.
Built for arduous environments, the Hippo 200 features:
Despite its solid construction, the pump weighs approximately 26kg, making installation and servicing straightforward.
The Hippo 200 can be supplied with horizontal or vertical discharge outlets, allowing easier integration into existing pipework layouts and pumping chambers.
The Hippo 200 offers excellent value for money where higher performance is required. It delivers the increased flow and head many installations need without stepping up to expensive commercial grinder or cutter pumps that are often unnecessary for domestic use.
If you need a dependable, higher‑capacity submersible sewage pump with strong solids handling and proven construction, the Hippo 200 is a practical and cost‑effective choice.
Please note: the hosetail connector is not included.
Images are indicative and may not represent the exact model supplied.
| Model | Evak Hippo 200 (230V) | Evak Hippo 200 (400V) |
| Manual/ Auto | Manual or Auto | Manual |
| Outlet/ mm | 50 | 50 |
| Power/kW | 1.5 | 1.5 |
| Voltage/V | 230 | 400 |
| Flow Rate L/min | 660 | 660 |
| Head /m | 15 | 15 |
| Free Passage | 50 | 50 |
| W x L x H /mm | 271 x 186 x 520 | 271 x 186 x 520 |
| Weight /Kg | 26 | 26 |
Cross-section of a sealed MDPE sump with an automatic submersible pump and arm float switch. Watch one full cycle below.
Rainwater or seepage flows in via the gravity inlet and pools at the bottom of the buried chamber.
As the level climbs, the arm float lifts. At the trigger height it closes the switch contact.
The Ama-Drainer N 301 powers up, lifting water through the riser and out to the sewer.
The arm drops as water clears. The switch opens and the pump rests until the next cycle.
Foul or surface water collected from the gravity inlet at the side of the chamber.
Submersible Ama-Drainer N 301, switched by the float arm.
Arm float switch closes the circuit at the high-water mark and opens at cut-out.
Robust MDPE shell with flanged base to anchor against buoyancy and ground movement.
Layflat hose is very affordable but can kink. Depending on your use, you may be better using a reinforced suction delivery hose for your needs.
Suction delivery hose is ideal for pumping up stairs or over obstacles.
Jonathan Martin explains the differences to help you choose which hose is best for your scenario.
