Tsurumi LSC1.4S - Puddle Sucker Pump - Manual and Automatic Puddle Pumps
TSURUMI Pumps are the manufacturer of the LSC1.4S puddle sucking pump. The manufacturer offers a 3-year product guarantee as standard, giving the added reassurance that you will get a product that is built to last.
Aptly named the puddle-sucker, the LSC1.4S is capable of pumping water down to just 1mm (with the additional extension probes), making it the perfect choice of pump if you are looking to pump either big or small areas of water that can be found on flat surfaces. The common applications for the LSC1.4S puddle sucker are hire fleets, flood control, lift shafts, fixed installations, utilities and in construction.
Due to the design, and the dual-position outlet port, the outlet hose for this pump can be positioned vertically or horizontally. For additional sturdiness, the outer casing is made from pressed steel and a pump stand made with cast aluminium. The water puddle sucker pump delivers its promise of extreme reliability and high performance. To prevent the backflow of water coming from the discharge hose, there is an integral swing check valve included.
This pump can comfortably operate for prolonged periods of time with very little water at all due to the air and water-cooling route to the top outlet. The pump should not be left to run dry.
110V: designed for heavy-duty site use, however, a transformer is needed for them to operate.
230V: compatible with standard domestic 3 pin plug sockets.
The pump can be supplied as a manual or automatic models. Please note the extension probes are only for the automatic model.
Alternatives:
You may wish to also consider the Stream SPK530 for a cost effective alternative, or for a more powerful puddle pump, you may wish to use the EVAK Residox.
Automatic models:
For fixed installations the SwitchH20 and Panel is recommended. This consists of 3 probes in 304 stainless steel. It is supplied with a control panel and 10m of cable. It allows automatic pumping down to 5mm.
For portable use, the sensor is recommended. This is an electronic float switch with 2 stainless steel probes. They are encapsulated in an impact resistant moulded rubber. This can still be used for fixed installations or narrow sumps. As an optional extra, extension probes are available to enable pumping down between 85mm and circa 1mm. Watch the Extension Probe Video here. The extensions are available to buy here: 170mm Sensor Extension Probes.
When the probes touch water, the pump will start and continue to operate for one minute after the water falls below it. However, if the water touches the probe within this time, the “stop” signal is cancelled and the pump continues to run until the water is cleared.
Please note: As standard we supply 25mm outlets. Please select 50mm if you require a 50mm outlet.
What's in the box:
- 1x LSC Water Puddle Pump
- 1x 10m Heavy duty rubber power cable
- 1x Hose tail
Technical Information & Downloads
Shipping Information
Next Day Delivery:
We use a next working day service and aim to dispatch orders placed before 4pm, the same working day.
Please provide your mobile number at the checkout to receive tracking information.
Our goal is to achieve next working day delivery for all orders. However, there are times when unforeseen circumstances may cause delays in delivery. Please note that we cannot be held liable for any losses or incidents that arise due to such delivery delays. Please refer to our Terms and Conditions for further details.
Same Day:
In certain urgent circumstances we may be able to offer collection, or may be able to offer same day delivery. Please call us on 0115 9870358 and we may be able to arrange this for you.
