PUMP CATEGORY

Pump Fittings and Accessories

Build, connect and protect your pump system with the right fittings. Our range covers hose tails and connectors for flexible hose, BSP pipe fittings for rigid pipework, valves for flow control and backflow prevention, and strainers to ke...

Products in range 58
From £0.48£0.40 (Exc VAT)
Material Mixed
Sizes Mixed
58 products
Tsurumi Pumps

Sediment Filter - Pollutant Capture

  • 100-micron sediment filter is ideal for use in hire fleets, site or pond drainage
  • Accepted by the Environment Agency
  • Capture weight of 20kg
£69.00 £57.50 (Exc VAT)
In stock
View
Tsurumi Pumps

Cam coupling c/w female BSP - part D

  • Female cam coupler with a female BSP thread, screws onto a male threaded pump outlet
  • Pairs with a Part E on the hose, so connections are made by hand with no tools
  • Available in 25mm (1 inch), 50mm (2 inch), 75mm (3 inch), 100mm (4 inch)
  • Keeps the arms and gasket on the pump rather than on hose ends that get dragged about
£6.66 £5.55 (Exc VAT)
In stock
View
Tsurumi Pumps

Residue Pumping Kit - Floor Tool and 4 m Suction Hose - Pumps to 3mm

  • Clears standing water down to 3 mm where a standard strainer leaves several inches
  • Move it from puddle to puddle with the engine running, no stopping and re-priming
  • Fits Honda WX10, Tsurumi TEM-25H and TE2-25H, the 25 mm ported petrol pumps
  • No mains power needed, which is the point of working off a petrol pump
£188.40 £157.00 (Exc VAT)
In stock
View

Pump Fittings and Accessories

Build, connect and protect your pump system with the right fittings. Our range covers hose tails and connectors for flexible hose, BSP pipe fittings for rigid pipework, valves for flow control and backflow prevention, and strainers to keep debris out of your pump. This category includes all pump fittings and accessories.

Choosing the right pump fittings

Pump installations typically use a combination of flexible hose and rigid pipework, so most setups need fittings from more than one category. Knowing which goes where saves time and prevents leaks.

Buying guide

More about pump fittings.

The deeper read: how to choose the right fittings, the four categories, our best-sellers, and buying tips that save site time.

Browse by fitting type

  • Hose Tails, Connectors and Clips: BSP hose tails, cam couplings, lever lock fittings, quick release connectors and hose clips for flexible hose runs.
  • Pipe Fittings: Elbows, tees, sockets, nipples and bushes for threaded BSP pipework in brass, polypropylene and galvanised iron.
  • Pump Valves: Ball valves, gate valves, non-return valves and foot valves for flow control, isolation and backflow prevention.
  • Strainers and Intake Protection: Foot valve strainers, trash strainers and fine mesh strainers to protect your pump from debris and silt.

Best-selling pump fittings

  • Hose Clips: Secure hoses tightly to prevent leaks. Always use two clips per hose tail connection on suction lines. Sizes range from 8 to 12mm up to 190 to 210mm.
  • Hose Joiners: Connect two lengths of hose. Choose a joiner that matches your hose internal diameter and pair with two hose clips per side.
  • BSP Hose Tails: Connect flexible hose to threaded ports on pumps and pipework. Available in brass and polypropylene with male or female BSP threads.

Fittings buying tips

  • Match the thread: All our fittings use BSP (British Standard Pipe) threads in standard sizes from 1/2 inch to 3 inch. Check your pump's port size before ordering.
  • Choose the right material: Brass and galvanised iron suit dirty water and outdoor use. Polypropylene is lighter, corrosion-proof and ideal for clean water transfer.
  • Always pair hose tails with two hose clips: One clip is rarely enough on suction lines where pressure changes can loosen connections.
Common questions

Frequently asked questions.

How are most pumps connected?

Most pumps connect using a hose tail with either a male or female BSP thread to match the pump outlet, and a hose clip to secure the hose to the tail.

What is male and female thread?

Male threads are on the outside of a fitting, female threads are on the inside. A male fitting screws into a female fitting. To connect to a pump, check whether the pump outlet has internal threads (female, you need a male hose tail) or external threads (male, you need a female hose tail).

What is BSP thread?

BSP stands for British Standard Pipe, the threading used on most UK water pumps and fittings. All fittings on this page use BSP threads in standard sizes from 1/2 inch to 3 inch. Match the BSP size on your pump outlet to the BSP size on your hose tail or fitting.

Do you stock anything to manage pollution?

Yes, our Sediment Filter for Pollutant Capture is Environment Agency approved for treating site discharge water before it enters drains or watercourses. It removes silt, sediment and particulates from pumped water on construction, dewatering and civils projects where discharge consent conditions apply.

What is a foot valve and do I need one?

A foot valve is a non-return valve with an integrated strainer fitted to the bottom of a suction hose.

It keeps the suction line primed between pump cycles and stops debris entering the pump.

Foot valves are essential for any pump drawing water from a tank, well or open source where the pump sits above the water level.