Tsurumi HS2.75S Submersible Site Drainage Pump | High-Head 2 Inch, 18m

Tsurumi HS2.75S Submersible Site Drainage Pump | High-Head 2 Inch

The Tsurumi HS2.75S takes the same 2 inch (50mm) outlet as the HS2.4S but steps up to a 750W motor and 18m of head, making it the high-head choice in the HS range. When you need to push water further across a site, higher up out of a deep excavation, or over a long hose run through a 2 inch line, the HS2.75S delivers up to 230 litres per minute with the head to back it up.

Built to last in demanding environments

The HS2.75S shares the HS range's rugged build: a ductile iron pump casing, cast aluminium motor frame and head cover, a wear-resistant urethane semi-vortex impeller, a 403 stainless steel shaft, a PVC strainer base and a double mechanical seal. A 7mm free passage handles dirty water with silt, sand and suspended solids.

Oil lifter for longer seal life

As a 750W model, the HS2.75S features Tsurumi's oil lifter system, which keeps the shaft seal continuously lubricated even when the pump runs at a low water level or partially submerged, extending seal and pump life on demanding, long-running jobs.

Manual or automatic

Available as a manual pump or with an automatic pendant float switch in a waterproof, ball-bearing actuated housing. The HS2.75S automatic switches on at approximately 430mm and off at approximately 50mm.

Performance

• Maximum flow: 230 L/min
• Maximum head: 18m
• Outlet: 2 inch (50mm)
• Motor: 750W, 110V or 230V
• Free passage: 7mm
• Dry weight: 16.9kg (manual)

Supplied with a 10m heavy-duty cable and hose tail, and backed by Tsurumi's 3-year warranty.

Which HS pump do you need?

The HS2.75S is the high-head 2 inch model, best where you need lift and pressure through a 2 inch line. For a lighter, compact pump (and the puddle pump adaptor option), see the Tsurumi HS2.4S. For higher flow through a 3 inch outlet at the same head, see the Tsurumi HS3.75S. Full comparison below.

Tsurumi HS2.4S vs HS2.75S vs HS3.75S

All three share the same rugged HS build, urethane semi-vortex impeller and 7mm free passage. The right one depends on flow, head and outlet size.

• HS2.4S: 2 inch, 205 L/min, 12m head, 400W, 11.3kg. The compact, lightest model, and the only one that takes the puddle pump adaptor.
• HS2.75S: 2 inch, 230 L/min, 18m head, 750W. Same 2 inch outlet, more head for higher or longer pumping.
• HS3.75S: 3 inch, 310 L/min, 18m head, 750W. The 80mm outlet moves the most water with the least friction loss.

What’s in the Box?

• ✅ 1x HS2.75S Pump
• ✅ 1x 10m Heavy-duty rubber power cable
• ✅ 1x Hose tail