Best Budget Puddle Pump – Pumps Down to 2mm
What is the SPP2‑4 pump used for?
Designed and manufactured by Stream Pumps, the SPP2‑4 puddle sucker pump is a cost‑effective submersible water pump for clean and slightly dirty water. It is ideal for removing shallow water where a low‑cost, portable solution is required.
- Removing water from flooded areas
- Draining flat roofs
- Clearing garages and basements
- Emptying water storage containers
- Emptying hot tubs*
*Use only for emptying unoccupied hot tubs. Allow water to cool before use and flush the pump with clean water afterwards.
Pumping up and out of a basement or over a wall? Consider adding our Non-Return Valve and Hose Tail Kit to stop the water in your hose flowing back through the pump when the level drops.
The pump can be fully submerged but will also operate in partial immersion.
Need automatic operation?
The SPP2-4 is a manual puddle pump, so it needs to be switched on and off as required.
If you want the pump to respond to water automatically, choose the Stream SPP2-4A. It uses a low-level floor sensor to start the pump at approximately 20mm of water and switch it off again at around 10mm.
View the Stream SPP2-4A Automatic Puddle Pump ›
Buy it as a kit
The SPP2-4 is also sold in two FPS Engineered™ kits, each with the hose and fittings for the job.
A pump on its own does nothing until you have something to run the discharge through. Let our expertise take the guess work out of buying a water pump.
Small Flood Pump Kit › for garages, cellars and utility rooms
Hot Tub Draining Pump Kit › for hot tubs, pools and water butts
Construction and Durability
Lightweight and portable, the SPP2‑4 is designed for occasional and emergency use. The shaft is manufactured from 201 stainless steel and features a ceramic graphite mechanical seal.
An optional 90° elbow hose tail is available to help prevent hose kinks during use.
Why Choose the SPP2‑4?
The SPP2‑4 offers excellent value for money for customers who need a simple, low‑cost solution for small floods and shallow water removal.
- Budget‑friendly puddle pump
- Pumps water down to 2mm
- Lightweight and easy to deploy
- Suitable for domestic and light industrial use
Please note: this pump is not recommended for use in ponds or water features.
Operational Details
- Model: SPP2‑4 (manual operation only)
- Maximum head: 6m
- Flow rate: 70 litres per minute
- Free passage: 3mm
- Outlet size: 25mm
- Maximum submersion depth: 5m
- Water temperature: 5°C to 40°C
- Suitable for clean and slightly dirty water (not sewage)
- Handles particles up to 3mm in suspension
What’s in the box
- 1 × SPP2‑4 puddle pump
- 1 × 10m heavy‑duty 230V rubber power cable
- 3 × hose tails (12mm / 19mm / 25mm)
Warranty
Supplied with a 2‑year manufacturer’s warranty.