EVERYTHING WE STOCK
All Products
Speroni
Speroni WX(M)-A Single-Stage Centrifugal Pump | Food-Grade
- Open-impeller stainless pump for food processing, washdown and light chemicals
- Handles slightly dirty and moderately aggressive liquids, and 25% glycol
- Hard-faced seals for abrasive duty
- 230V single-phase (WXM) or 400V three-phase (WX)
- Food-grade stainless build, for non-potable process water
£400.00
£333.33 (Exc VAT)
In stock
Speroni
Speroni GA(M) 100 Single-Stage Centrifugal Pump | Water Transfer
- Open-impeller centrifugal for slightly dirty water, irrigation and circulation
- Handles non-aggressive water with light suspended solids
- High flow for transfer and horticulture
- 230V single-phase (GAM100) or 400V three-phase (GA100)
- Cast iron, for non-potable water only
£225.00
£187.50 (Exc VAT)
In stock
Speroni
Speroni KS1100/PA Seawater Surface Jet Pump
- Portable seawater jet pump for marine, coastal and harbour use
- Self-priming, up to 8m suction lift
- Plastic body with 316 stainless shaft to resist salt corrosion
- 230V single-phase
- For seawater and saltwater, non-potable
£305.00
£254.17 (Exc VAT)
In stock
APP
APP BPS Automatic Submersible Drainage Pump | Pendant Float Switch
- Automatic float switch
- Designed for clean and slightly dirty water
- 2 year warranty
- Choose between 230v or 110v
£115.00
£95.83 (Exc VAT)
In stock
Simaco
EGO 500 GI LS Puddle Pump | Low-Level to 1mm, Manual & Auto
- Pumps down to just 1mm in manual mode for clean-water low-level-suction applications
- Dual manual or automatic operation via mechanical float switch
- Auto mode starts at 130mm, stops at 70mm
- Flat-base low-suction body restricts inlet to 1mm (clean water only)
- More affordable than the SE LS where electronic sensors aren't needed
£235.00
£195.83 (Exc VAT)
In stock
Flood Protection Solutions
190 Litre Stainless Steel Sewage Pump Station | FPS Iguazu FEKA
- Stainless steel packaged sewage pump station for foul, sewage and grey water
- 400 L/min flow and 7.5m head (FEKA VS750, 230V)
- Corrosion-resistant stainless steel pump for demanding effluent and longer life
- 190 litre chamber, ready to install with pipework, non-return valve and float switch
- Automatic operation
£870.00
£725.00 (Exc VAT)
In stock
Tsurumi Pumps
Braided Suction Hose 30mm Outlet
- 1¼" bore (30mm internal diameter)
- Largest braided size, maximum flow
- For large pond, aquaculture and commercial filtration
£119.00
£99.17 (Exc VAT)
In stock
Tsurumi Pumps
High Pressure Delivery Hose 25mm
- 1" bore (25mm internal diameter)
- 7 bar, noticeably higher flow than ¾"
- Suits 1" transfer and booster pumps
£89.00
£74.17 (Exc VAT)
In stock
Flood Protection Solutions
Suction & Delivery Hose 100mm (4 inch)
- 4 inch bore (102mm internal diameter)
- Large bore for high-volume pumps
- Reinforced for heavy suction
£169.00
£140.83 (Exc VAT)
In stock
FPS Engineered™
Automatic Commercial basement, Site & Plant Room Pump Kit | SPK530A
- Around 5,650 litres an hour at a 3m lift through the hose supplied
- 11m of head, reaching street level from a deep basement, still moving water at 9m
- No control panel, no wiring, no commissioning, so no electrician and no lead time
- Clears to 10mm on automatic, lower than any other automatic pump we sell
- Cast iron casing and polyurethane vortex impeller, built for gritty plant room water
£429.07
£357.56 (Exc VAT)
In stock
FPS Engineered™
Ultra-Compact Sump & Pit Pump Kit | APP BPS100EA, 134mm Wide
- 134 × 170 × 250mm and 2.1kg, the smallest pump kit we build
- 26mm narrower and 45mm shorter than our RS32EA kit, and just over half the weight
- Takes 19mm or 25mm hose, including a garden hose, with 10m of 25mm supplied
- Fully automatic on an integral float, nothing to wire in
- Around 49 L/min at a 2m lift, roughly 2,900 litres an hour
£204.07
£170.06 (Exc VAT)
In stock
FPS Engineered™
High Flow Petrol Water Pump Kit | Honda WB30, 1,100 L/min
- Around 1,010 L/min through the kit, roughly 60,000 litres an hour at a 2m lift
- Both hoses supplied, 10m reinforced for suction and 10m layflat for delivery, both 80mm
- 80mm throughout loses under 3m of head across the full run, so you keep 92% of rated flow
- Honda GX160, 5.5hp, with Oil Alert, handling solids to 6mm
- Suction lift to 7.5m, no power supply needed
£730.00
£608.33 (Exc VAT)
In stock
Tsurumi Pumps
Residue Pumping Kit - Floor Tool and 4 m Suction Hose - Pumps to 3mm
- Clears standing water down to 3 mm where a standard strainer leaves several inches
- Move it from puddle to puddle with the engine running, no stopping and re-priming
- Fits Honda WX10, Tsurumi TEM-25H and TE2-25H, the 25 mm ported petrol pumps
- No mains power needed, which is the point of working off a petrol pump
£188.40
£157.00 (Exc VAT)
In stock
FPS Engineered™
Petrol Flood & Site Pump Kit | Honda WB20 - 2 Inch
- 474 litres per minute through the kit. Around 28,000 litres an hour at typical lift.
- Both hoses included. 6 m reinforced for suction, 30 m layflat for reach. The pump alone comes without them.
- Cast iron volute and impeller. Abrasion resistant, so silt and sand do not finish it.
- Honda GX120 with Oil Alert. The commercial 4-stroke, in a tubular steel crash frame.
£557.99
£464.99 (Exc VAT)
In stock
FPS Engineered™
Petrol Water Transfer Pump Kit | Honda WX10
- Both hoses included. The pump alone comes without them, and it will not prime without a proper suction line.
- 113 litres per minute through the kit. Roughly 6,800 litres an hour at typical lift.
- 6.1 kg, one-handed carry. The lightest pump in Honda's petrol range, with a GX25 4-stroke engine.
- 36 metres of head. Enough to push water a long way uphill, not just across a yard.
£451.99
£376.66 (Exc VAT)
In stock
FPS Engineered™
Site Drainage Pump Kit | EVAK Drainox 400 & 750
- 190 to 257 litres per minute through the supplied hose. Choose the pump to match your lift.
- Stainless steel and cast iron build. Strainer base, cover and handle in stainless, FC20 cast iron housing.
- Automatic operation. Starts and stops with the water, so it can be left working in an excavation.
- 5 mm free passage. Abrasion-resistant Hytrel vortex impeller for grit and site water.
£439.49
£366.24 (Exc VAT)
In stock
FPS Engineered™
Silty Trench Dewatering Pump Kit | EVAK Trenchman 400
- Built-in agitator. Stirs settled silt back into suspension so it can be pumped away, not left behind.
- 15 mm free passage. Three times the Drainox, for fines, grit and small stones.
- Around 189 litres per minute through the supplied hose. Roughly 11,300 litres an hour at site lift.
- 20 m of 50 mm layflat included. Automatic float control, so it works while you do.
£366.49
£305.41 (Exc VAT)
In stock
FPS Engineered™
Contractor Dewatering Pump Kit | Tsurumi LB480
- Around 190 litres per minute through the supplied hose. Roughly 11,400 litres an hour at site lift.
- 20 m of 50 mm layflat included. Enough reach for most excavations, and it rolls down to almost nothing.
- 110 V or 230 V. Site transformer or building mains, identical kit either way.
- Tsurumi durability. The pump hire fleets keep buying, from a maker in business since 1924.
£428.33
£356.94 (Exc VAT)
In stock
FPS Engineered™
Trade & Hire Flood Pump Kit | Stream SPK530 - 230V or 110V
- Pumps down to 1 mm. Takes a floor back to damp rather than leaving a layer to mop.
- Two hoses, joined or separate. 6 m reinforced for steps and doorways, 10 m layflat for reach.
- Built-in swing check valve. No separate non-return valve to buy or fit.
- 110V or 230V Option. Site transformer or domestic mains
£405.18
£337.65 (Exc VAT)
In stock
FPS Engineered™
High-Flow Automatic Basement Flood Pump Kit | Evak Residox 750 - 10m
- Around 285 litres per minute through the supplied hose. Roughly 17,000 litres an hour at basement lift.
- Automatic floor sensor. Starts and stops with the water, so it protects the space while nobody is there.
- Built for abrasive water. Stainless case, cast iron housing and a Hytrel vortex impeller that tolerates grit.
- Brass non-return valve included. Nothing runs back down a 10m hose when the pump cuts out.
£787.88
£656.57 (Exc VAT)
In stock
FPS Engineered™
Swimming Pool Draining Pump Kit | Mizar 60 Submersible Pump
- Around 130 l/m through the supplied hose. A typical 45,000 litre pool in under six hours.
- high grade 304 stainless steel throughout. The grade that resists chlorides, so it suits chlorinated and salt-chlorinated pools.
- 10 mm free passage. Copes with leaves and debris in a pool that has been standing.
- Connects with nothing else to buy. Male hose tail and clip matched to the pump's 32 mm outlet.
£439.37
£366.14 (Exc VAT)
In stock
FPS Engineered™
Hot Tub Draining Pump Kit | SPP2 Puddle Pump
- Empties a typical 6 person hot tub in about 25 minutes.
- Drains down to approximately 2 mm.
- 6 m hose reaches a drain or border. Reinforced 25 mm bore that will not kink over the tub side.
- Manual operation, attended use only. No float switch, so you switch it off at the plug when the tub is empty.
£150.06
£125.05 (Exc VAT)
In stock
All Products: Everything We Stock, in One Place
This is our complete catalogue: every pump, hose, fitting and accessory we supply. It is the widest view of the range. If you are only looking for pumps, the All Pumps page is the better starting point; for help choosing a pump, see the water pumps guide.
Buying guide
The full catalogue.
Pumps, hoses, fittings and accessories - the complete range.
Browse the Full Range
- All Pumps - every pump we stock, browsable by type and brand
- Hoses - layflat, suction & delivery, high-pressure and braided hose
- Fittings & Accessories - hose tails, connectors, valves, strainers and float switches
The most popular pump categories are puddle pumps, submersible pumps, sump pumps, sewage pumps and packaged pump stations.
Need a Hand?
Use the Pump Finder above, read the water pumps guide, or call our engineer-led helpdesk on 0115 987 0358. Stocked items ship next working day on UK orders placed before 2pm.
Continue shopping
