All Products

Accessories for the MH Pond Water Pump

High-Flow Flood Water Pump Station, 830 L/min | Microforce

• The highest-flow 230V sump station we supply, for large-scale flood water
• 830 L/min flow and 10m head (APP HD-15A, 230V)
• Designed for high-inflow, flood-risk sites; rapid water removal
• Not for low-flow or small-scale floods, to avoid rapid on/off cycling
• Permanent installation, connected so water flows freely into the chamber

c/w lugs hose tail c/w female BSP swivel

Layflat Hose 100mm Outlet (4inch)

• 4 inch bore (102mm internal diameter)
• Quarter the weight of rigid hose
• Deploys fast in flood response

HydroSacks

Tsurumi TDS Petrol Trash Pump | High-Flow Dirty Water Pump

• Available in petrol engines
• Flow rates up to 2000ltr min
• Self-priming centrifugal pumps

Speroni CA(M) Stainless Steel Jet Pump | Self-Priming, 110V/230V/400V

• Stainless self-priming jet pump for wells, tanks and rainwater
• Self-priming, up to 8m suction lift
• 304 stainless wetted parts
• Available in 110V, 230V single-phase, and 400V three-phase
• Suitable for potable water from a tank or private supply (not for direct mains, not WRAS)

APP KHL-20 Submersible Water Pump - High Head

• High head (25m)
• Suitable for clean and dirty water
• Powerful motor

Braided Suction Hose 20mm Outlet

• ¾" bore (19mm internal diameter)
• 10 bar working pressure
• Popular for pond filters and hydroponics

Umbra Pompe Acuatec 5" Borehole Pump – Balanced Pressure & Flow

• Balanced 5” borehole pump for pressure and flow
• Versatile option for most installations
• Manual or float switch versions available
• Ideal for irrigation and general water supply

Stream SPK530A Automatic Heavy Duty Puddle Sucker Pump

• Automatic crab floor sensor starts at 20 mm and stops at 10 mm
• 170 litres per minute to 11 m head for basements, sump pits and site dewatering
• Cast iron casing and polyurethane vortex impeller resist sand and silt
• Rotatable 25 mm discharge outlet for vertical or horizontal pumping

Non-Return Valve & Hose Tail Kit – 25mm (1″ BSP)

• Stops pumped water flowing back down your hose
• 25mm non-return valve with matching hose tail
• Screws directly onto the pump outlet
• Ideal for low-level pumps, reduces airlock problems on longer hose runs

Speroni CMX Single-Stage Centrifugal Pump 230V | Water Transfer

• Stainless single-stage centrifugal for water transfer and supply, 230V
• Not self-priming (needs flooded suction or a foot valve), 7m lift with foot valve
• 304 stainless wet end, also handles light chemicals
• 230V single-phase (the CTX is the 400V three-phase version)
• Suitable for potable water from a tank or private supply (not for direct mains, not WRAS)

190 Litre High-Flow Sewage Pump Station, 11m Head | FPS Iguazu Foul Pro

• Packaged sewage pump station for foul water, sewage and grey water
• 480 L/min flow to 11m head (EVAK Hippo 100, 230V)
• Higher flow and head than the standard foul station, for longer or higher discharge runs
• 190 litre chamber, ready to install with pipework, non-return valve and float switch
• Supplied to the Environment Agency

Braided Suction Hose 25mm Outlet

• 1" bore (25mm internal diameter)
• 9 bar, higher flow than ¾"
• For pond pumps and food or beverage transfer

Sediment Filter - Pollutant Capture

• 100-micron sediment filter is ideal for use in hire fleets, site or pond drainage
• Accepted by the Environment Agency
• Capture weight of 20kg

Umbra Pompe Eurojet 4 Inch Borehole Pump | Domestic & Agricultural

• Entry-level 4” borehole pump for domestic and agricultural use
• High pressure pump for irrigation and supply
• Manual or float switch options available
• Simple and reliable design

APP MVH-10 Automatic Well Pump 230V – Irrigation & Sprinkler Systems

• Best for irrigation and sprinkler systems
• Float-controlled automatic operation
• Suitable for tanks, wells and water butts
• Ideal for Irrigation and Sprinkler Systems

Tsurumi OM5 Submersible Sump Pump

• Manual and auto models available
• Narrow float switch on auto model
• Perfect for narrow sumps and chambers