FOR THE TRADE

Pumps for Plumbers & Drainage Contractors

For an installer the pump is only part of it. What matters is a unit that fits the chamber, passes what it needs to, and switches reliably once you have left site. The choice starts with the water, foul or clean, and whether it is a fixe...

Products in range 51
From £1.16£0.97 (Exc VAT)
Delivery Next working day
Support Engineer-led
51 products
Tsurumi Pumps★ 5.0

Tsurumi OM5 Submersible Sump Pump

  • Manual and auto models available
  • Narrow float switch on auto model
  • Perfect for narrow sumps and chambers
£429.00 £357.50 (Exc VAT)
In stock
View
Flood Protection Solutions★ 5.0

190 Litre High-Flow Sewage Pump Station, 11m Head | FPS Iguazu Foul Pro

  • Packaged sewage pump station for foul water, sewage and grey water
  • 480 L/min flow to 11m head (EVAK Hippo 100, 230V)
  • Higher flow and head than the standard foul station, for longer or higher discharge runs
  • 190 litre chamber, ready to install with pipework, non-return valve and float switch
  • Supplied to the Environment Agency
£798.00 £665.00 (Exc VAT)
In stock
View
Speroni

Speroni KF(M) Brass Peripheral Pump | Industrial & Boiler Feed

  • Cast iron peripheral pump for boiler feed and light industrial boosting
  • Not self-priming (flooded suction or foot valve), 7m lift with foot valve
  • High head from a small, compact motor
  • 230V single-phase or 400V three-phase, two models
  • Cast iron body, for non-potable water only
£190.00 £158.33 (Exc VAT)
In stock
View
Speroni

Speroni RSX(M)4 4-Stage Multistage Pump | High-Head Booster

  • Mid-size stainless multistage booster for irrigation and pressurisation
  • Higher flow than the RSX2 for more sprinklers and outlets
  • 230V single-phase (RSXM4) or 400V three-phase (RSX4)
  • All wetted parts 304 stainless
  • Suitable for potable water from a tank or private supply (not for direct mains, not WRAS)
£415.00 £345.83 (Exc VAT)
In stock
View
EVAK

EVAK Residox 400 Automatic Sensor Puddle Pump | 213 L/min

  • Automatic puddle pump with integrated floor-level sensor
  • Detects water at 3 mm (±1 mm) above the floor
  • Adjustable delays prevent rapid on/off cycling, protecting the motor
  • Plugs straight into 230V mains, no control panel required
  • Full Residox 400 build, 250 l/min, 11 m head
£555.00 £462.50 (Exc VAT)
In stock
View
Tsurumi Pumps

30m Budget Discharge Hose 25mm, 32mm and 38mm

  • Lowest cost delivery hose in the range
  • Thin, spiral-helix reinforced PVC, very flexible and light to handle
  • Ideal for ponds, aquariums and light occasional use, supplied in 30m coils
£115.00 £95.83 (Exc VAT)
In stock
View
Speroni★ 5.0

Speroni Cutty Grinder Sewage Pump

  • Grinder pump for sewage pumping stations
  • Two sizes: Cutty 200 (1.5kW) or Cutty 250 (1.85kW)
  • 230V single-phase or 400V three-phase
  • Cuts and pumps sewage, soft solids, and shreddable fibres
  • Designed for long distances through small-bore pipe
£1,355.00 £1,129.17 (Exc VAT)
In stock
View
Stream Pumps

Stream SPP2-4A Automatic Puddle Pump with Low-Level Sensor

  • 70 litres per minute to 6 m head for cellars, sump pits and utility rooms
  • Three hose tails supplied, 12 mm, 19 mm and 25 mm
  • 3.3 kg, Lightweight design for convenient one-handed transport
  • 2 year warranty, available for collection
£149.99 £124.99 (Exc VAT)
In stock
View
Flood Protection Solutions

190 Litre Stainless Steel Sewage Pump Station | FPS Iguazu FEKA

  • Stainless steel packaged sewage pump station for foul, sewage and grey water
  • 400 L/min flow and 7.5m head (FEKA VS750, 230V)
  • Corrosion-resistant stainless steel pump for demanding effluent and longer life
  • 190 litre chamber, ready to install with pipework, non-return valve and float switch
  • Automatic operation
£870.00 £725.00 (Exc VAT)
In stock
View
Flood Protection Solutions★ 4.5

190 Litre Sewage & Foul Water Pump Station, 7m Head | FPS Iguazu Foul

  • Packaged sewage pump station for foul water, sewage and grey water
  • 330 L/min flow to 7m head (EVAK Hippo 50, 230V)
  • The ready-to-install domestic foul solution
  • 190 litre chamber with pipework, non-return valve and float switch
  • Automatic operation
£750.00 £625.00 (Exc VAT)
In stock
View
Speroni

Speroni RV(M) Vertical Multi-Stage Pump

  • Vertical multistage booster for pressurisation where floor space is tight
  • Stacked impellers for high pressure, quiet running
  • 230V single-phase (RVM) or 400V three-phase (RV)
  • Potable use
£660.00 £550.00 (Exc VAT)
In stock
View
Speroni

RSX(M)2 2-Stage Multistage Pump | Pressure Boosting

  • Compact stainless multistage booster for sprinklers and pressure
  • Stacks impellers for high pressure from a small motor
  • 230V single-phase (RSXM2) or 400V three-phase (RSX2)
  • All wetted parts 304 stainless
  • Suitable for potable water from a tank or private supply (not for direct mains, not WRAS)
£425.00 £354.17 (Exc VAT)
In stock
View
FPS Engineered™

Automatic Commercial basement, Site & Plant Room Pump Kit | SPK530A

  • Around 5,650 litres an hour at a 3m lift through the hose supplied
  • 11m of head, reaching street level from a deep basement, still moving water at 9m
  • No control panel, no wiring, no commissioning, so no electrician and no lead time
  • Clears to 10mm on automatic, lower than any other automatic pump we sell
  • Cast iron casing and polyurethane vortex impeller, built for gritty plant room water
£429.07 £357.56 (Exc VAT)
In stock
View
FPS Engineered™

FPS Engineered™ Automatic Puddle Pump Kit for Basements & Cellars

  • Automatic operation: starts at approximately 20mm of water and stops at around 10mm.
  • Low-level pumping: clears lower on automatic than conventional float-switch pumps that require greater water depth to operate.
  • Separate floor sensor: position the sensor where water reaches first.
  • Non-return valve included: prevents water in the discharge hose flowing back towards the pump.
  • Maximum flow: up to 70 litres per minute.
£196.31 £163.59 (Exc VAT)
In stock
View
FPS Engineered™

Ultra-Compact Sump & Pit Pump Kit | APP BPS100EA, 134mm Wide

  • 134 × 170 × 250mm and 2.1kg, the smallest pump kit we build
  • 26mm narrower and 45mm shorter than our RS32EA kit, and just over half the weight
  • Takes 19mm or 25mm hose, including a garden hose, with 10m of 25mm supplied
  • Fully automatic on an integral float, nothing to wire in
  • Around 49 L/min at a 2m lift, roughly 2,900 litres an hour
£204.07 £170.06 (Exc VAT)
In stock
View
Stream Pumps

Stream SPK530A Automatic Heavy Duty Puddle Sucker Pump

  • Automatic crab floor sensor starts at 20 mm and stops at 10 mm
  • 170 litres per minute to 11 m head for basements, sump pits and site dewatering
  • Cast iron casing and polyurethane vortex impeller resist sand and silt
  • Rotatable 25 mm discharge outlet for vertical or horizontal pumping
£390.00 £325.00 (Exc VAT)
In stock
View
FPS Engineered™

Site Drainage Pump Kit | EVAK Drainox 400 & 750

  • 190 to 257 litres per minute through the supplied hose. Choose the pump to match your lift.
  • Stainless steel and cast iron build. Strainer base, cover and handle in stainless, FC20 cast iron housing.
  • Automatic operation. Starts and stops with the water, so it can be left working in an excavation.
  • 5 mm free passage. Abrasion-resistant Hytrel vortex impeller for grit and site water.
£439.49 £366.24 (Exc VAT)
In stock
View
FPS Engineered™

High-Flow Automatic Basement Flood Pump Kit | Evak Residox 750 - 10m

  • Around 285 litres per minute through the supplied hose. Roughly 17,000 litres an hour at basement lift.
  • Automatic floor sensor. Starts and stops with the water, so it protects the space while nobody is there.
  • Built for abrasive water. Stainless case, cast iron housing and a Hytrel vortex impeller that tolerates grit.
  • Brass non-return valve included. Nothing runs back down a 10m hose when the pump cuts out.
£787.88 £656.57 (Exc VAT)
In stock
View
FPS Engineered™

Non-Return Valve & Hose Tail Kit – 25mm (1″ BSP)

  • Stops pumped water flowing back down your hose
  • 25mm non-return valve with matching hose tail
  • Screws directly onto the pump outlet
  • Ideal for low-level pumps, reduces airlock problems on longer hose runs
£7.25 £6.04 (Exc VAT)
In stock
View
Buying guide

Pumps for plumbing and drainage by job.

Foul water and sewage

Lifting foul water and sewage where gravity is not possible. Pumps rated to pass solids.

Featured: EVAK Hippo 50, 75, 100 and 200; APP SV, BCV and DSPK cutter; Speroni Cutty grinder and 304 stainless SXS. See sewage and wastewater pumps.

Packaged pump stations

Complete chamber, pump and pipework for basements, extensions and pumped drainage.

Featured: the FPS Iguazu range (635, Twin, Foul, Foul Pro, FEKA) and the high-flow Microforce. See packaged pump stations and the below-ground stations tool for larger.

Sump pumps into an existing chamber

Dropping a reliable automatic pump into a cellar or drainage chamber.

Featured: AMA Drainer 301; Tsurumi POMA (narrow chamber) and OM5. See sump pumps.

Basement Type C waterproofing

Removing the groundwater a cavity drainage system channels to a low point, reliably and unattended.

Featured: EVAK Residox 400 and 750 automatic; AMA Drainer 301; FPS Iguazu 635. Kit: High-Flow Automatic Basement Kit. See basement waterproofing pumps.

Ready-to-use kits

Our FloodMate and High-Flow Automatic Basement kits are the ready-made options for drainage and basement work, with a Basement Sump Kit on the way. See all pump kits.

Why installers buy from us

We supply installer-ready packages: complete stations that arrive matched, and sewage pumps that pass the solids they should. Our team sizes foul and drainage work with you, and our explainer on sewage pumps and Building Regulations (Approved Document H) covers the compliance side.

Many of these are FPS Engineered™ combinations, specified and matched by our team. Learn more about FPS Engineered™.

Common questions

Frequently asked questions.

Which pump station for a basement toilet?

A packaged foul station rated to pass sewage solids, such as the FPS Iguazu Foul range. See packaged pump stations.

What is the difference between a sump pump and a packaged station?

A sump pump is a single pump dropped into an existing chamber; a packaged station is a complete chamber, pump and pipework supplied as one unit. See sump pumps.

What size sewage pump passes 50mm solids?

Choose a pump with a stated solids passage of at least 50mm, such as a larger EVAK Hippo. The solids rating is on each product page. See sewage pumps.

Which pump for a Type C basement system?

An automatic pump that reliably removes the groundwater a cavity drainage system channels to the sump, such as the EVAK Residox, or a packaged FPS Iguazu 635. See basement waterproofing pumps and our Type C explainer.

Do foul pumps need to meet Building Regs?

Foul drainage work falls under Building Regulations, with Approved Document H the relevant guidance. Choose a sewage-rated pump and size the chamber for the demand. Read our Building Regulations explainer.

Can I pump into an existing chamber?

Yes, with a sump pump sized to the chamber and the discharge run. See sump pumps.

Advice & insight

Related guides.

All advice articles

Add some article blocks in the editor to populate this grid.